Search Results

77 items found matching 1950 Chevrolet 3100 Suburban 2 door Wagon - Barn Door
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Side window run channel kit

p/n: 90-3288-90

Six (6) piece set. Set includes run channel and beltline weatherstrip.

$225.50/set
$203.00/set
10% discount
Kit
Front Door Weatherstrip Kit

p/n: 90-0124-72

Door weatherstrip kit. This kit is the primary seal for the door to the body. Set includes the door bottom and perimeter seals that attach to the body and the door edge weatherstrip that attaches to the door.

$136.20/set
In Stock
Windshield Gasket

p/n: 60-0169-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.

$116.20/ea.
Made to Order Takes 2-3 Days
Windshield Gasket

p/n: 60-0083-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit.

$116.20/ea.
In Stock
Transmission mount service

p/n: 60-0573-24

Support - Insulator, engine mount at transmission. Revulcanization service only.

$112.40/ea.
Call or Email
Rear Window Gasket Set

p/n: 60-0380-81

This rear window gasket set mounts around the two (2) separate back windows. They have vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$108.40/pr.
In Stock
Windshield Gasket

p/n: 70-1945-50

This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$92.80/ea.
In Stock
Flexible Run Channel

p/n: 60-0129-58

Channel, flexible side window run, for window with metal glass frames. Flexible corrugated steel, cloth covered and mohair lined. Ninety (90) inch long strip.

$83.80/ea.
In Stock
Body anti-squeak 64 inch strip

p/n: 70-1117-45

Filler, runningboard-to-body, sixty four (64) inch long strip. For forty (40) inch strips see our #70-1116-45.

$80.20/pr.
In Stock
Door weatherstrip

p/n: 60-0030-73

Weatherstrip, interior door edge, black rubber only. (For door bottom, see our #60-0078-73). Two 10 foot strips, enough for two (2) doors.Length: 120.

$78.50/pr.
In Stock
Steering column grommet

p/n: 60-0436-32

Grommet, steering gear. Molded with metal core as original with all original features.Length: 4.375 inches.

$77.30/ea.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$76.30/ea.
In Stock
Front spring bumper

p/n: 60-0393-32

Bumper, front spring axle-to-frame.

$68.30/pr.
Made to Order Takes 1-2 Days
Body bumper kit

p/n: 90-0213-90

Sixteen (16) piece body bumper kit.

$75.40/set
$67.90/set
10% discount
Kit
Window felt weatherstrip

p/n: 80-0927-57

Made from Original material. Side window horizontal seal (also known as beltline weatherstrip). These strips wipe the side windows when the glass is lowered. They come ready to install with finished ends and body curvature bends for a factory like appeara

$57.90/set
In Stock
Access hole plug

p/n: 60-0016-24

Cover, brake master cylinder filler and inspection hole. Metal core as original.

$56.30/ea.
In Stock
Parking brake boot

p/n: 60-0145-24

Boot, parking brake lever at floor.

$56.10/ea.
Made to Order Takes 1-2 Days
Hinge Seal Set

p/n: 60-0285-69

Seal, back door hinge, outside. A four (4) piece set. Some vehicles require two (2) sets.

$53.00/set
In Stock
Headlight Door To Lens Seal

p/n: 70-0493-14

Headlight Door To Lens Seal - Molded without wire. Double lip type for sealed beam headlights. Note: Compare with our single lip type #70-0389-14 sold separately.

$52.10/pr.
In Stock
Beltline weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Seven sixteenths (7/16) inch wide, with chrome bead, mohair faced, flexible. Two (2) three (3) foot strips. Bend to fit.

$47.70/pr.
In Stock
Inner Fender Seal

p/n: 60-0288-45

Inner Fender Seal for anti-rattle, runningboard apron to body, or fender splash panels. Nine sixteenths (9/16) inch by seven eighths (7/8) inch slotted sponge rubber to accept rivets. Sold in eight (8) foot strips.

$46.90/ea.
In Stock
License plate mounting pad

p/n: 60-0493-17

Pad, taillight and license bracket.Length: 5.5625 inches.

$46.40/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$43.40/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$43.40/ea.
In Stock
Spring seat seal

p/n: 60-0261-32

Seal, rear spring seat. Four (4) piece set.Height: .1875 inches.

$43.20/set
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$41.80/ea.
In Stock
Headlight Mounting Pad

p/n: 70-0201-14

Headlight body mounting gasket. Rubber.

$41.10/pr.
In Stock
Cowl vent gasket

p/n: 60-0124-54

Gasket, cowl vent. Original labyrinth style, not sponge.Length: 16.5 inches. Width: 4.0 inches.

$37.90/ea.
In Stock
Hood to cowl weatherstrip

p/n: 60-0056-42

Anti-squeak, hood to cowl. Five eighths (5/8) inch by seven thirty seconds (7/32) inch. One eight (8) foot strip per vehicle.Length: 96.0 inches.

$35.40/ea.
In Stock
Taillight mounting pad

p/n: 60-0340-17

Pad, taillight retainer.Length: 4.625 inches.

$34.60/ea.
In Stock
Brake and clutch pedal pad

p/n: 60-0242-22

Pad, brake and clutch pedal.Length: 3.5 inches. Width: 2.5 inches.

$31.10/pr.
In Stock
Door weatherstrip

p/n: 60-0313-73

Weatherstrip, door bottom. Retained by metal strip, black only. Each strip approximately thirty two and one half (32-1/2) inches long.

$31.00/pr.
In Stock
Belt line weatherstrip

p/n: 60-0287-58

Weatherstrip, door window at beltline, outer, (scraper type). Each strip approximately twenty six (26) inches to twenty seven (27) inches long.

$30.80/pr.
In Stock
Starter button

p/n: 60-0322-21

Starter button, push on replacement to rod. Two (2) inch outside diameter.

$28.80/ea.
In Stock
Door bumper

p/n: 60-0334-71

Bumper, back door check link above door. Dovetail base fits check arm.Length: 1.0 inches. Width: 1.0 inches. Height: .625 inches.

$28.70/pr.
In Stock
Brake master cylinder boot

p/n: 60-0180-24

Boot, brake master cylinder rod. Fits on one and one fourth (1-1/4) inch diameter cylinder. Height: 2.125 inches.

$27.60/ea.
In Stock
Fuel neck grommet

p/n: 70-1908-41

Grommet, fuel neck through inner panel.

$27.60/ea.
In Stock
Brake and Clutch Pedal Pad

p/n: 60-0218-22

Pad, brake and clutch pedal. Length: 3.75 inches. Width: 2.375 inches.

$27.20/pr.
In Stock
Brake and clutch pedal bumper

p/n: 60-0579-24

Bumper, brake or clutch pedal to floorboard. Longer type with one and three eighths (1-3/8) inch clearance for pedal shaft.Length: 2.75 inches.

$26.70/pr.
In Stock
Door weatherstrip

p/n: 60-0078-73

Weatherstrip, lower door. Heavy type with original ribbing and retainer lip.

$25.10/pr.
In Stock
Firewall grommet

p/n: 60-0276-45

Grommet, firewall, throttle rod and tube, oil pressure gauge pipe, heat indicator tube and choke rod. One and seven sixteenths (1-7/16) inch outside diameter.

$20.80/ea.
In Stock
Starter button cover

p/n: 60-0166-21

Cover, starter pedal button. Rubber slip over type for old metal. Two (2) inch outside diameter. If car doesn't have old metal, see our #60-0322-21.

$20.20/ea.
In Stock
Cowl vent hose

p/n: 60-0381-54

Hose, cowl vent drain.Length: 7.25 inches.

$19.10/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Door bumper

p/n: 60-0333-71

Bumper, dovetail, left hand back door, rubber only. To be used with old casing.

$15.70/ea.
In Stock
Cowl vent gasket

p/n: 60-0332-54

Gasket, cowl side vent.Length: 9.5 inches. Width: 4.0 inches.

$15.50/ea.
In Stock
Firewall grommet

p/n: 60-0057-21

Grommet, wiring harness through firewall, for one and one fourth (1-1/4) inch hole in sheet metal.Height: .75 inches.

$15.10/ea.
In Stock
Starter pedal bellows

p/n: 60-0210-21

Bellows, starter pedal shaft to floorboard. Three eighths (3/8) inch top hole with three (3) inch height.Width: 2.875 inches. Height: 3.0 inches.

$13.00/ea.
In Stock
Shock and stabilizer bushing

p/n: 50-0220-32

Bushing, for shock absorber link cross pin or stabilizer link cross pin.1931-36 Bushing, rubber, for shock absorber link cross pin, #41151.

$11.90/ea.
In Stock
Gearshift bushing

p/n: 60-0237-24

Bushing, gearshift shaft lever, larger type. Three eighths (3/8) inch inside diameter by nine sixteenths (9/16) inch outside diameter barrel.Height: .

$10.80/ea.
In Stock
Steering column seal

p/n: 60-0435-32

Seal, steering column at toe pan, sponge.Length: 5.375 inches. Height: .25 inches.

$10.80/ea.
Made to Order Takes 2-3 Days
Rear spring bushing

p/n: 60-0236-48

Bushing, body shackles.Length: 1.125 inches.

$6.40/ea.
In Stock
Hood side bumper

p/n: 70-2617-42

Bumper, hood side upper. Fully molded, authentic configuration for 1/4" hole. Six (6) typically required per vehicle. Note: This part is included in our 90-0213-90 Body Bumper

$6.30/ea.
In Stock
Pressure ring

p/n: 70-0261-69

Pressure ring (washer), sponge rubber, interior door handle and window regulator escutcheon. One and three fourths (1-3/4) inches outside diameter by three eighths (3/8) inch thick.

$5.90/ea.
In Stock
Shock absorber arm bushing

p/n: 60-0106-32

Bushing, shock absorber arm link.

$5.90/ea.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
In Stock
Peel-N-Stick Door Weatherstrip

p/n: 70-0331-WT

Door edge weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Makes for an easier installation of door weatherstripping. Also excellent for use in many different applications and on many different vehicle models.

$5.60/ft.
In Stock
Door weatherstrip

p/n: 70-0219-73

Weatherstrip, door edge, constant section on some models. Five eighths (5/8) inch by (5/8) inch cross-section, high grade, fine grain sponge rubber.

$5.30/ft.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0331-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.30/ft.
In Stock
Peel-N-Stick Door Weatherstrip

p/n: 70-0145-WT

Door edge weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Excellent for use in many different applications and on many different vehicle models.

$5.30/ft.
In Stock
Shock absorber grommet

p/n: 60-0235-33

Grommet, shock absorber mounting, plain cylinder type with flat ends.

$5.30/ea.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0145-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.00/ft.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Run Channel Clip

p/n: 60-0374-58

Clip, end of door window run channel. Tempered spring steel. Length: 1.8125 inches. Width: .50 inches.

$4.60/ea.
In Stock
Taillight lens gasket

p/n: 70-3770-15

Gaskets, tail light lens. Die cut cork to authentic original dimensions.

$4.30/pr.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Shock absorber bushing

p/n: 70-0541-33

Bushing, shock absorber mounting. Five eighths (5/8) inch hole, one and one fourth (1-1/4) inch outside diameter, five eighths (5/8) inch thick.

$4.10/ea.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Firewall grommet

p/n: 32-0162-21

Grommet, utility. Sheet Metal Hole: 3/4" Center Hole: 1/4" Outside Diameter: 15/16" Slot Width: 1/16"

$3.90/ea.
In Stock
Shock absorber bushing

p/n: 70-0547-32

Bushing, shock absorber mounting. Double cone style, rear. Five eighths (5/8) inch hole, one and one sixteenths (1-3/16) inch outside diameter, three fourth (3/4) inch thick.

$3.50/ea.
In Stock
Hood & Door bumper

p/n: 33-0459-42

Bumper, hood to cowl and door hinge pillar upper. May be used in both places.

$2.90/ea.
In Stock
Shock Absorber Arm Bushing

p/n: 60-0216-33

Bushing, for double acting shock absorber arm link. Height: .78125 inches.

$2.60/ea.
In Stock
Standard Bumper

p/n: 33-0128-88

Standard Bumper - Commonly used for fuel filler or glovebox doors.

$1.00/ea.
In Stock
License plate bumper

p/n: 60-0734-71

Bumper, door or license frame to trunk.

$0.90/ea.
In Stock