Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

74 items found matching 1951 Chevrolet 3100 Truck 2 door Panel Delivery
Side Window Run Channel Kit

p/n: 70-2485-58

Eight (8) piece set. Set includes run channel and beltline weatherstrip.

In Stock
Front Door Weatherstrip Kit

p/n: 90-0124-72

Door weatherstrip kit. This kit is the primary seal for the door to the body. Set includes the door bottom and perimeter seals that attach to the body and the door edge weatherstrip that attaches to the door.

In Stock
Front Door Vent Window Weatherstrip Set

p/n: 60-0065-55

This front door vent window weatherstrip set is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit. The division post seals contain a brass core for durability and easy installation.

In Stock
Windshield Gasket

p/n: 60-0169-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.

In Stock
Windshield Gasket

p/n: 60-0083-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit.

In Stock
Transmission mount service

p/n: 60-0573-24

Support - Insulator, engine mount at transmission. Revulcanization service only.

Call or Email
Window felt weatherstrip

p/n: 80-0055-57

Made from Standard material. Side window horizontal seal (also known as beltline weatherstrip). These strips wipe the side windows when the glass is lowered. They come ready to install with finished ends and body curvature bends for a factory like appeara

Allow 1-3 Weeks Ships Separately
Windshield Gasket

p/n: 70-1945-50

This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

In Stock
Body anti-squeak 64 inch strip

p/n: 70-1117-45

Filler, runningboard-to-body, sixty four (64) inch long strip. For forty (40) inch strips see our #70-1116-45.

In Stock
Door weatherstrip

p/n: 60-0030-73

Weatherstrip, interior door edge, black rubber only. (For door bottom, see our #60-0078-73). Two 10 foot strips, enough for two (2) doors.Length: 120.

In Stock
Steering column grommet

p/n: 60-0436-32

Grommet, steering gear. Molded with metal core as original with all original features.Length: 4.375 inches.

Made to Order Takes 2-3 Days
Rigid run channel

p/n: 60-0073-58

Channel, rigid division bar. Un-beaded, cloth covered, mohair lined. Perfect replacement requires drilling for screws.

In Stock
Body Bumper Kit

p/n: 90-0213-90

Body Bumper Kit - sixteen (16) pieces.

Front spring bumper

p/n: 60-0393-32

Bumper, front spring axle-to-frame.

Made to Order Takes 1-2 Days
Access hole plug

p/n: 60-0016-24

Cover, brake master cylinder filler and inspection hole. Metal core as original.

In Stock
Parking brake boot

p/n: 60-0145-24

Boot, parking brake lever at floor.

In Stock
Hinge Seal Set

p/n: 60-0285-69

Seal, back door hinge, outside. A four (4) piece set. Some vehicles require two (2) sets.

In Stock
Headlight Door To Lens Seal

p/n: 70-0493-14

Headlight Door To Lens Seal - Molded without wire. Double lip type for sealed beam headlights. Note: Compare with our single lip type #70-0389-14 sold separately.

In Stock
Beltline Weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Bend to fit. Available in a 3ft pair.

In Stock
Inner Fender Seal

p/n: 60-0288-45

Inner Fender Seal for anti-rattle, runningboard apron to body, or fender splash panels. Nine sixteenths (9/16) inch by seven eighths (7/8) inch slotted sponge rubber to accept rivets. Sold in eight (8) foot strips.

In Stock
Vent division bar weatherstrip

p/n: 60-0663-56

Front vent window division post seal. Fully molded with metal core and attaching tabs. This part fits opposite the glass run channel and seals the vent window when the vent is closed. See Front door vent weatherstrip for main rubber seal.

In Stock
Spring seat seal

p/n: 60-0261-32

Seal, rear spring seat. Four (4) piece set.Height: .1875 inches.

In Stock
Flexible Run Channel

p/n: 70-1107-57

Cloth covered mohair-lined type. For sides and top of side windows. Available in 5ft lengths.

In Stock
Headlight Mounting Pad

p/n: 70-0201-14

Headlight body mounting gasket. Rubber.

In Stock
Cowl vent gasket

p/n: 60-0124-54

Gasket, cowl vent. Original labyrinth style, not sponge.Length: 16.5 inches. Width: 4.0 inches.

In Stock
Hood to cowl weatherstrip

p/n: 60-0056-42

Anti-squeak, hood to cowl. Five eighths (5/8) inch by seven thirty seconds (7/32) inch. One eight (8) foot strip per vehicle.Length: 96.0 inches.

In Stock
Brake and clutch pedal pad

p/n: 60-0242-22

Pad, brake and clutch pedal.Length: 3.5 inches. Width: 2.5 inches.

In Stock
Door weatherstrip

p/n: 60-0313-73

Weatherstrip, door bottom. Retained by metal strip, black only. Each strip approximately thirty two and one half (32-1/2) inches long.

In Stock
Beltline Weatherstrip

p/n: 60-0287-58

Weatherstrip, door window at beltline, outer, (scraper type). Each strip approximately twenty six (26) inches to twenty seven (27) inches long.

In Stock
Fuel neck grommet

p/n: 60-0149-41

Grommet, fuel filler neck (1955-1st type). Oblong fully molded rubber with retaining flange. Three and seven eighths inch (3 7/8") outside width by five and one eight inch (5 1/8") outside length by one and one eighth inch (1 1/8") height. Two and one eig

Made to Order Takes 1-2 Days
Starter button

p/n: 60-0322-21

Starter button, push on replacement to rod. Two (2) inch outside diameter.

In Stock
Door bumper

p/n: 60-0334-71

Bumper, back door check link above door. Dovetail base fits check arm.Length: 1.0 inches. Width: 1.0 inches. Height: .625 inches.

In Stock
Brake master cylinder boot

p/n: 60-0180-24

Boot, brake master cylinder rod. Fits on one and one fourth (1-1/4) inch diameter cylinder. Height: 2.125 inches.

In Stock
Fuel neck grommet

p/n: 70-1908-41

Grommet, fuel neck through inner panel.

Made to Order Takes 1-2 Days
Brake and Clutch Pedal Pad

p/n: 60-0218-22

Pad, brake and clutch pedal. Length: 3.75 inches. Width: 2.375 inches.

In Stock
Brake and clutch pedal bumper

p/n: 60-0579-24

Bumper, brake or clutch pedal to floorboard. Longer type with one and three eighths (1-3/8) inch clearance for pedal shaft.Length: 2.75 inches.

In Stock
Door weatherstrip

p/n: 60-0078-73

Weatherstrip, lower door. Heavy type with original ribbing and retainer lip.

In Stock
Hood bumper kit

p/n: 33-0680-42

Hood bumper set. Kit includes two (2) each of our #33-0123-42 bumpers and six (6) each of our #33-0459-42 bumpers.

In Stock
Firewall grommet

p/n: 60-0276-45

Grommet, firewall, throttle rod and tube, oil pressure gauge pipe, heat indicator tube and choke rod. One and seven sixteenths (1-7/16) inch outside diameter.

In Stock
Starter button cover

p/n: 60-0166-21

Cover, starter pedal button. Rubber slip over type for old metal. Two (2) inch outside diameter. If car doesn't have old metal, see our #60-0322-21.

In Stock
Cowl vent hose

p/n: 60-0381-54

Hose, cowl vent drain.Length: 7.25 inches.

In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

In Stock
Door bumper

p/n: 60-0333-71

Bumper, dovetail, left hand back door, rubber only. To be used with old casing.

In Stock
Firewall grommet

p/n: 60-0057-21

Grommet, wiring harness through firewall, for one and one fourth (1-1/4) inch hole in sheet metal.Height: .75 inches.

In Stock
Starter pedal bellows

p/n: 60-0210-21

Bellows, starter pedal shaft to floorboard. Three eighths (3/8) inch top hole with three (3) inch height.Width: 2.875 inches. Height: 3.0 inches.

In Stock
Shock and stabilizer bushing

p/n: 50-0220-32

Bushing, for shock absorber link cross pin or stabilizer link cross pin.1931-36 Bushing, rubber, for shock absorber link cross pin, #41151.

In Stock
Gearshift bushing

p/n: 60-0237-24

Bushing, gearshift shaft lever, larger type. Three eighths (3/8) inch inside diameter by nine sixteenths (9/16) inch outside diameter barrel.Height: .

In Stock
Steering column seal

p/n: 60-0435-32

Seal, steering column at toe pan, sponge.Length: 5.375 inches. Height: .25 inches.

Made to Order Takes 2-3 Days
Rear spring bushing

p/n: 60-0236-48

Bushing, body shackles.Length: 1.125 inches.

In Stock
Hood side bumper

p/n: 70-2617-42

Bumper, hood side upper. Fully molded, authentic configuration for 1/4" hole. Six (6) typically required per vehicle. Note: This part is included in our 90-0213-90 Body Bumper

In Stock