Search Results

109 items found matching 1952 Buick Special 2 door Coupe
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Side window run channel kit

p/n: 90-0141-58

This ten (10) piece kit includes the inner and outer windowfelts, upper and lower rigid run channels, and flexible run channels needed to complete two (2) doors. Used for front or rear doors in models with vent windows in the door.

$272.20/set
$245.00/set
10% discount
Kit
Rear Window Gasket

p/n: 25-0095-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding.

$187.30/ea.
Made to Order Takes 2-3 Days
Front Door Vent Window Kit

p/n: 90-0405-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$180.10/set
$171.10/set
5% discount
Kit
Front Door Vent Window Weatherstrips

p/n: 38-0062-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$165.20/pr.
In Stock
Axle rebound pad

p/n: 50-0371-35

Bumper, rear axle. Revulcanization service only.Height: 3.5 inches.

$155.00/pr.
In Stock
Hood to cowl weatherstrip

p/n: 50-0398-43

Weatherstrip, hood to cowl.

$153.70/ea.
Made to Order Takes 1-2 Days
Motor mount service

p/n: 50-0297-11

Motor mount, front. Revulcanization service only.Qty Required:2 Length: 3.375 inches. Width: 2.625 inches. Height: 1.25 inches.

$139.60/pr.
Call or Email
Trunk Weatherstrip

p/n: 70-0871-84

This trunk weatherstrip set is designed from original parts for superior fitment and seal. The set contains the strips and corners that mount to the body and the strip that mounts to the lid.

$118.70/set
In Stock
Transmission mount service

p/n: 50-0264-25

Support pad, transmission mount (insulator). Revulcanization service only.Length: 5.0 inches. Width: 2.0 inches.

$105.90/ea.
Call or Email
Transmission mount service

p/n: 50-0263-25

Support, transmission (insulator). Revulcanization service only. See also our #50-0262-25, many models use both.Length: 5.0 inches. Width: 1.875 inches.

$102.30/ea.
Call or Email
Transmission mount service

p/n: 50-0262-25

Pad, transmission mounting, thrust. Revulcanization service only. One (1) per car required. See also our #50-0263-25. Many models use both.Length: 7.

$100.50/ea.
Call or Email
Torque ball service

p/n: 50-0190-27

Retainer, torque ball, heavy steel jacket with molded rubber inner collar. Revulcanization service only.

$97.40/ea.
Call or Email
Door weatherstrip hinge pillar

p/n: 50-0268-73

Weatherstrip, body hinge pillar to door, bellows type seal.

$86.10/pr.
In Stock
Rigid run channel

p/n: 70-0536-58

Run channel, front door window, for full length of division bar (approximately twenty nine (29) inches). Rigid, bright beaded edge, mohair lined channel, die trimmed and formed at top.

$85.50/pr.
In Stock
Axle rebound pad

p/n: 50-0370-35

Bumper, rear axle stop. Molded left and right. Revulcanization service only.

$84.60/pr.
Call or Email
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$76.30/ea.
In Stock
Trunk Weatherstrip Corners

p/n: 60-0511-85

These trunk weatherstrip corners are designed from the original part for superior fitment and seal. The seals mount to the front corners of the trunk directly to the body.

$70.40/pr.
In Stock
Trunk emblem mounting pad

p/n: 50-0103-17

Mounting pad, trunk emblem.Width: 15.875 inches.

$64.30/ea.
In Stock
Torque ball boot

p/n: 50-0178-27

Boot, torque ball.

$62.30/ea.
In Stock
Front Stablizer Bar End Link Kit

p/n: 70-0567-34

Kit, stabilizer bar link assembly. Twenty two (22) piece set for both sides of one (1) car, front and rear. (Order 2 sets if you need both). Hex head bolt. 5/16"-24nf x 7-5/8" lg. Comes with metal sleeve, cup washers and rubber grommets.

$59.50/set
In Stock
Taillight mounting pad

p/n: 70-2745-15

Pad, taillight housing to body.Width: 8.0625 inches. Height: 5.1875 inches.

$58.90/pr.
In Stock
Clutch equalizer bushing kit

p/n: 70-2029-24

Kit, clutch equalizer bushing & seal. Kit includes metal sleeved rubber bushing and molded rubber seals for each end of equalizer.

$56.10/set
In Stock
Rear coil spring pad

p/n: 50-0359-35

Insulators, rear coil spring. Fabric reinforced rubber as original. One (1) pair per car.

$54.10/pr.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Channel, rigid run, window division bar. Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar.

$52.10/pr.
In Stock
Flexible Run Channel 6 Foot

p/n: 70-1239-58

Window run channel with stainless beaded edge. Six (6) foot length. Cloth covered, mohair lined, flexible channel for sides and top of door windows. Exact replacement for listed vehicles but can be used in many applications.

$48.20/ea.
In Stock
Beltline weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Seven sixteenths (7/16) inch wide, with chrome bead, mohair faced, flexible. Two (2) three (3) foot strips. Bend to fit.

$47.70/pr.
In Stock
Bumper seal

p/n: 50-0467-28

Seal, bumper arm. One (1) pair per car.

$47.20/pr.
Made to Order Takes 1-2 Days
Headlight Door To Lens Seal

p/n: 70-0389-14

Headlight door to lens seal. Molded without wire. Single lip type for sealed beams.

$46.40/pr.
In Stock
Front suspension bumper

p/n: 50-0091-32

Bumper, front suspension, upper arm.Height: 2.0 inches.

$46.00/pr.
In Stock
Front stabilizer bushing

p/n: 50-0094-34

Bushings, front stabilizer shaft-to-frame or stabilizer shaft, front or rear. Fully molded rubber. One and one half inch (1 1/2") length by one and one half inch (1 1/2") width by eleven sixteenths inch (11/16") inside hole diameter by one and one half in

$44.70/pr.
In Stock
Brown brake and clutch pad

p/n: 50-0054-89

Pad, brake and clutch pedal. Brown rubber. For black see our part #50-0054-22. Perfect copy, fine detail.Color:brown Width: 3.125 inches.

$44.40/pr.
In Stock
Flexible Run Channel 5 Foot

p/n: 70-1238-58

Window run channel, stainless beaded edge. Cloth covered, mohair lined flexible metal channel for sides and top of door windows. Perfect dimensions, Five eighths (5/8) inch wide by nine sixteenths (9/16) inch overall height, exact replacement. Five (5) fo

$44.30/ea.
In Stock
Sliding Quarter Window Weatherstrip

p/n: 70-0353-78

Weatherstrip, inner and outer for sliding quarter window, chrome beaded, mohair faced, flexible stock. May be formed to required outline. Six (6) foot strip.

$43.50/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$43.40/ea.
In Stock
Front suspension bumper

p/n: 50-0092-32

Bumper, front suspension, lower arm. Steel core, with threaded stud, as original. Two (2) per car required.

$42.70/ea.
In Stock
Headlight Mounting Pad

p/n: 70-0201-14

Headlight body mounting gasket. Rubber.

$41.10/pr.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$39.10/ea.
In Stock
Rigid run channel

p/n: 70-0516-58

Channel, rigid run, lower side window below beltline, zinc plated steel with black cloth lining, one half (1/2) inch deep by one half (1/2) inch wide, fifteen (15) inches long.

$36.10/pr.
In Stock
Brake and clutch shank seal

p/n: 50-0066-24

Grommet, brake and clutch pedal floor seal.Width: 1.8125 inches. Height: 2.375 inches.

$32.50/pr.
In Stock
Brake and clutch pedal pad

p/n: 50-0054-22

Pad, brake and clutch pedal. Black rubber. For brown see our part #50-0054-89. Perfect copy, fine detail.Width: 3.125 inches. Height: 2.125 inches.

$28.80/pr.
In Stock
Front coil spring pad

p/n: 50-0358-35

Insulators, front coil spring. Fabric reinforced rubber as original.

$27.60/pr.
In Stock
Starter solenoid boot

p/n: 70-0371-21

Boot, starter solenoid.

$26.60/ea.
In Stock
Battery cable boot

p/n: 70-0704-21

Boot, battery cable at starter solenoid.Width: 2.75 inches.

$23.50/ea.
In Stock
Heater control valve seal

p/n: 50-0356-20

Seal, heater control valve. High quality sponge rubber designed to cushion heater control valve and keep out noise and water. For all except right-hand drive.

$21.50/ea.
In Stock
Trunk bumper

p/n: 70-0296-87

T-nut, trunk bumper in gutter at sides, brass core tapped 10-32 thread. Two (2) required per car. For models having partial weatherstrip in gutter of body.

$21.50/ea.
In Stock
Body mounting pad

p/n: 50-0477-48

Pad, body mounting. Fully molded rubber with metal core & locating collar. One and seven eighths inch (1 7/8") outside diameter by one and one eighths inch (1 1/8") locating collar outside diameter by three fourths inch (3/4") locating collar inside diame

$20.60/ea.
In Stock
Door handle gasket kit

p/n: 50-0322-69

Gasket set, door handle, outside. For front and rear door if necessary. Six (6) piece set for two (2) doors.

$20.40/set
In Stock
Hydraulic pump mounting pad

p/n: 70-0852-67

Pad, mounting, hydraulic pump. Used on models with hydraulic window lifts or hydraulic convertible top. Two (2) to three (3) required. per car.

$19.00/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Brake Pedal Pad

p/n: 50-0278-22

Pad, brake pedal. Cars equipped with Dyna-Flow transmissions only.

$16.70/ea.
In Stock
Hood bumper

p/n: 50-0159-42

Bumper, hood ledge corner at shroud.Width: 1.25 inches. Height: .5 inches.

$15.30/ea.
In Stock
Window stop stem bumper

p/n: 33-0675-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required. (See sketch and our #33-0540-62).

$15.10/pr.
In Stock
Vent Window Division Bar Weatherstrip

p/n: 70-0040-56

Vent window division post seal. Extruded thirty (30") inch rubber strip that may have to be glued to your old original division post seal core, or directly to the division post.

$14.90/ea.
In Stock
Body mounting pad

p/n: 50-0096-48

Pad, body mounting. Fully molded rubber with steel core and locating collar. Two inch (2") square by one and one eighth inch (1 1/8") locating collar outside diameter by eleven sixteenths inch (11/16") locating collar inside diameter by one half inch (1/2

$14.60/ea.
In Stock
Rear coil spring pad

p/n: 50-0304-35

Insulator, rear coil spring clamp bolt (upper end). Two (2) per car. Fabric reinforced rubber as original.

$14.60/ea.
In Stock
Parking and signal lens gasket

p/n: 50-0381-16

Gasket, front parking and signal light lens gasket. Backup lens on cars with optional backup lenses.

$13.20/ea.
In Stock
Parking/Backup light lens gasket

p/n: 70-1272-16

Gasket, parking light lens and backup light lens. Die cut from one eighth (1/8) inch rubber.

$13.20/pr.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.00/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Body mounting pad

p/n: 50-0097-48

Pad, several useages. Use as a body mounting pad or as a cushion for body mounting bolt. Fully molded rubber. Up to twenty (20) required per car. Two inches (2") outside diameter by three fourths inch (3/4") inside hole diameter by one half inch (1/2") he

$10.60/ea.
In Stock
Firewall grommet

p/n: 50-0363-20

Grommet, firewall, windshield washer hose.

$10.50/ea.
In Stock
License lens gasket

p/n: 50-0357-17

Gasket set, rear license light assembly. One (1) rubber ring and one (1) cork rubber gasket comprise set.

$10.50/set
In Stock
Hood bumper

p/n: 34-0157-42

Bumper, hood to radiator grille frame. Four (4) per car, normally.

$10.10/ea.
In Stock
Axle rebound pad

p/n: 50-0302-35

Bushing, rear axle, anti-sway rod ends. Fully molded rubber. Four (4) required per car. One and one fourth inch (1 1/4") top outside diameter by one and one eighth inch (1 1/8") bottom outside diameter by five eighths inch (5/8") inside hole diameter by t

$9.90/ea.
In Stock
Wiper transmission gasket

p/n: 50-0484-53

Gasket, windshield wiper transmission to cowl. Steel rule die cut replacement for #4587667.

$9.80/pr.
In Stock
Hood bumper

p/n: 50-0158-42

Bumper, hood in fender flange.Width: 1.0 inches. Height: 1.5 inches.

$9.60/ea.
In Stock
Glovebox link bumper

p/n: 50-0367-88

Bumper, glove box check link. Fits on glove box door arm as needed.Length: .75 inches. Width: .5625 inches. Height: .3125 inches.

$7.90/ea.
In Stock
Window stop stem bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$7.90/ea.
In Stock
Tie rod dust cover

p/n: 70-0537-32

Dust cover, tie rod ends.

$7.80/ea.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0492-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$7.40/ft.
In Stock
Shift lever grommet

p/n: 50-0284-24

Grommet, shift lever insulator. One (1) per car. Three eighths (3/8) inch inside diameter by five eighths (5/8) inch barrel by one half (1/2) inch long.

$7.30/ea.
In Stock
Side window roller

p/n: 70-0117-62

Anti-rattle roller, side windows. Rubber only, replaces original perfectly and easily. Fits both styles of brackets.

$7.30/ea.
In Stock
Wiper control grommet

p/n: 60-0197-53

Grommet, wiper control connection link. Replaces #4161287. 11/32" I.D. X 19/32" O.D.

$7.30/ea.
In Stock
Brown door lock knob

p/n: 70-0660-70

Knob or push button for inside door lock, fits over 1/8" steel rod to door lock. Hard brown rubber, may be lacquered other colors as required.

$7.00/ea.
In Stock
Trunk Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0463-85

Trunk weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$6.90/ft.
In Stock
Trunk Weatherstrip

p/n: 50-0161-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.

$6.40/ft.
In Stock
Door Weatherstrip

p/n: 70-0491-73

Weatherstrip, door edge. Fine grain sponge. Larger type used on most GM cars this period. Width: 13/16". Height: 11/16".

$6.30/ft.
In Stock
Shock and stabilizer grommet

p/n: 70-0274-33

Grommet, shock and stabilizer link. Eight (8) required per car. Fully molded rubber with locating collar. One and one sixteenth inch (1 1/16") outside diameter by nine sixteenths inch (9/16") locating collar outside diameter by three eighths inch (3/8") i

$6.30/ea.
In Stock
Trunk Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 60-0411-85

Trunk weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$6.30/ft.
In Stock
License plate bumper

p/n: 33-0368-30

Bumper, license plate. Fully molded rubber.

$5.90/ea.
In Stock
Lock cylinder gasket

p/n: 70-0955-86

Gasket, trunk lock cylinder. Steel rule die cut from one thirty seconds (1/32) inch dense rubber.Length: 1.75 inches. Width: 1.25 inches. Height: .

$5.90/ea.
In Stock
Pressure ring

p/n: 70-0261-69

Pressure ring (washer), sponge rubber, interior door handle and window regulator escutcheon. One and three fourths (1-3/4) inches outside diameter by three eighths (3/8) inch thick.

$5.90/ea.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
In Stock
Body hole plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$5.70/ea.
In Stock
Door weatherstrip

p/n: 70-0219-73

Weatherstrip, door edge, constant section on some models. Five eighths (5/8) inch by (5/8) inch cross-section, high grade, fine grain sponge rubber.

$5.30/ft.
In Stock
Utility Plug

p/n: 35-0099-20

Plug, utility, various uses.

$5.00/ea.
In Stock
Firewall grommet

p/n: 35-0515-20

Grommet, floor pan, rear compartment and body.

$4.70/ea.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Firewall retainer

p/n: 60-0586-20

Retainer, firewall insulation panel. "Christmas Tree" style popular during this time. Constructed of vinyl plastic. Up to ten (10) required per car.

$4.60/ea.
In Stock
Gravel shield bumper

p/n: 33-0286-30

Bumper, rear gravel shield, anti-rattle. Five (5) or more used per car. Fully molded rubber. Seven eighths inch (7/8") length by five eighths inch (5/8") width by five eighths inch (5/8") height.

$4.60/ea.
In Stock
Wiring grommet

p/n: 32-0439-20

Grommet, various uses. Sheet Metal Hole: 1" Center Hole: 7/16" Outside Diameter: 1-5/16" Slot Width: 1/16"

$4.60/ea.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Door or tailgate bumper

p/n: 33-1228-71

Bumper pads, door or tailgate. Twin retainer style. Three eighths (3/8) inch by seven eighths (7/8) inch by one half (1/2) inch high.

$4.20/ea.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Door bumper

p/n: 33-1227-71

Bumper, door edge, twin retainer style, three eighths (3/8) inch wide by seven eighths (7/8) inch long by three eighths (3/8) inch high.

$3.50/ea.
In Stock
Firewall Grommet

p/n: 35-0369-20

Grommet, shroud or cowl upper panel gauge holes and for various body holes requiring grommet.

$3.40/ea.
In Stock
Sash channel weatherstrip

p/n: 70-0585-58

Weatherstrip, sash channel, outer, for side windows, one half (1/2) inch wide weatherlip (cross section).Width: .50 inches.

$3.40/ft.
In Stock
Wiring grommet

p/n: 32-0352-20

Grommet, parking brake release rod. Sheet Metal Hole: 3/8" Center Hole: 1/4" Outside Diameter: 9/16" Slot Width: 1/16"

$3.30/ea.
In Stock
Trunk floor pan plug

p/n: 35-0070-87

Plug, trunk and floor pan drain hole. Buick 1950-65 Plug, trunk and floor pan drain hole.

$3.20/ea.
In Stock