Search Results

75 items found matching 1953 Chevrolet 3100 Truck 2 door Standard Cab Pickup
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Side Window Run Channel Kit

p/n: 70-2485-58

Eight (8) piece set. Set includes run channel and beltline weatherstrip.

$174.80/set
In Stock
Front Door Weatherstrip Kit

p/n: 90-0124-72

Door weatherstrip kit. This kit is the primary seal for the door to the body. Set includes the door bottom and perimeter seals that attach to the body and the door edge weatherstrip that attaches to the door.

$136.20/set
In Stock
Front Door Vent Window Weatherstrip Set

p/n: 60-0065-55

This front door vent window weatherstrip set is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit. The division post seals contain a brass core for durability and easy installation.

$121.00/pr.
In Stock
Spring seat service

p/n: 60-0619-35

Seat, rear spring. Revulcanization service only. Send in complete casting with metal sleeve bushing.

$119.50/ea.
Call or Email
Windshield Gasket

p/n: 60-0083-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit.

$116.20/ea.
In Stock
Windshield Gasket

p/n: 60-0169-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.

$116.20/ea.
In Stock
Transmission mount service

p/n: 60-0573-24

Support - Insulator, engine mount at transmission. Revulcanization service only.

$112.40/ea.
Call or Email
Window felt weatherstrip

p/n: 80-0055-57

Made from Standard material. Side window horizontal seal (also known as beltline weatherstrip). These strips wipe the side windows when the glass is lowered. They come ready to install with finished ends and body curvature bends for a factory like appeara

$96.60/set
Allow 1-3 Weeks Ships Separately
Windshield Gasket

p/n: 70-1945-50

This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$92.80/ea.
In Stock
Door weatherstrip

p/n: 60-0030-73

Weatherstrip, interior door edge, black rubber only. (For door bottom, see our #60-0078-73). Two 10 foot strips, enough for two (2) doors.Length: 120.

$78.50/pr.
In Stock
Steering column grommet

p/n: 60-0436-32

Grommet, steering gear. Molded with metal core as original with all original features.Length: 4.375 inches.

$77.30/ea.
In Stock
Rigid run channel

p/n: 60-0073-58

Channel, rigid division bar. Un-beaded, cloth covered, mohair lined. Perfect replacement requires drilling for screws.

$71.70/pr.
In Stock
Front spring bumper

p/n: 60-0393-32

Bumper, front spring axle-to-frame.

$68.30/pr.
Made to Order Takes 1-2 Days
Body bumper kit

p/n: 90-0213-90

Sixteen (16) piece body bumper kit.

$75.40/set
$67.90/set
10% discount
Kit
Rear Quarter Window Gasket Set

p/n: 60-0092-83

This rear corner quarter window gasket set contains the quarter window gaskets and locking strips. All of the strips in this four (4) piece set come in forty-five inch (45") pieces and mount around the perimeters of the quarter windows on five window trucks. The ends may require trimming and bonding for installation.

$62.50/set
In Stock
Body anti-squeak 40 inch strip

p/n: 70-1116-45

Filler, runningboard-to-body, forty (40) inch long strip. For sixty four (64) inch strips see our #70-1117-45.

$62.10/pr.
In Stock
Rear Window Gasket

p/n: 60-0082-83

This rear window gasket weatherstrip set contains the rear window gasket itself and the locking strip. Both strips comes in a ninety inch (90") piece and mount around the full perimeter of the back glass. The ends may require trimming and bonding for installation.

$58.40/set
In Stock
Access hole plug

p/n: 60-0016-24

Cover, brake master cylinder filler and inspection hole. Metal core as original.

$56.30/ea.
In Stock
Parking brake boot

p/n: 60-0145-24

Boot, parking brake lever at floor.

$56.10/ea.
Made to Order Takes 1-2 Days
Headlight Door To Lens Seal

p/n: 70-0493-14

Headlight Door To Lens Seal - Molded without wire. Double lip type for sealed beam headlights. Note: Compare with our single lip type #70-0389-14 sold separately.

$52.10/pr.
In Stock
Beltline weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Seven sixteenths (7/16) inch wide, with chrome bead, mohair faced, flexible. Two (2) three (3) foot strips. Bend to fit.

$47.70/pr.
In Stock
Inner Fender Seal

p/n: 60-0288-45

Inner Fender Seal for anti-rattle, runningboard apron to body, or fender splash panels. Nine sixteenths (9/16) inch by seven eighths (7/8) inch slotted sponge rubber to accept rivets. Sold in eight (8) foot strips.

$46.90/ea.
In Stock
Vent division bar weatherstrip

p/n: 60-0663-56

Front vent window division post seal. Fully molded with metal core and attaching tabs. This part fits opposite the glass run channel and seals the vent window when the vent is closed. See Front door vent weatherstrip for main rubber seal.

$46.30/pr.
In Stock
Spring seat seal

p/n: 60-0261-32

Seal, rear spring seat. Four (4) piece set.Height: .1875 inches.

$43.20/set
In Stock
Flexible Run Channel

p/n: 70-1107-57

Channel, flexible window run, un-beaded. Five eighths (5/8) inch wide, five (5) foot long. Cloth covered mohair-lined type. For sides and top of side windows. High quality, perfect copy. Applications with vent window use a five (5) ft. strip. Applications

$41.40/ea.
In Stock
Accelerator pedal pad

p/n: 60-0301-41

Pad, accelerator pedal. Slipover cover type. Exact copy. Fits original steel core.Length: 8.0 inches.

$41.30/ea.
Made to Order Takes 1-2 Days
Headlight Mounting Pad

p/n: 70-0201-14

Headlight body mounting gasket. Rubber.

$41.10/pr.
In Stock
Cowl vent gasket

p/n: 60-0124-54

Gasket, cowl vent. Original labyrinth style, not sponge.Length: 16.5 inches. Width: 4.0 inches.

$37.90/ea.
In Stock
Brake and clutch pedal pad

p/n: 60-0242-22

Pad, brake and clutch pedal.Length: 3.5 inches. Width: 2.5 inches.

$31.10/pr.
In Stock
Door weatherstrip

p/n: 60-0313-73

Weatherstrip, door bottom. Retained by metal strip, black only. Each strip approximately thirty two and one half (32-1/2) inches long.

$31.00/pr.
In Stock
Hood to cowl weatherstrip

p/n: 60-0138-42

Anti-squeak, hood to cowl, two (2) piece set for right and left.Length: 38.0 inches. Width: .625 inches. Height: .21875 inches.

$31.00/set
In Stock
Belt line weatherstrip

p/n: 60-0287-58

Weatherstrip, door window at beltline, outer, (scraper type). Each strip approximately twenty six (26) inches to twenty seven (27) inches long.

$30.80/pr.
In Stock
Fuel neck grommet

p/n: 60-0271-41

Grommet, fuel filler neck. Oblong shaped molded rubber with retaining flange. Three and three fourths inch (3 3/4") outside length by three and five eighths inch (3 5/8") outside width. Two and thirteen sixteenths inch (2 3/16") inside hole width by two

$30.80/ea.
In Stock
Starter button

p/n: 60-0322-21

Starter button, push on replacement to rod. Two (2) inch outside diameter.

$28.80/ea.
In Stock
Brake master cylinder boot

p/n: 60-0180-24

Boot, brake master cylinder rod. Fits on one and one fourth (1-1/4) inch diameter cylinder. Height: 2.125 inches.

$27.60/ea.
In Stock
Brake and Clutch Pedal Pad

p/n: 60-0218-22

Pad, brake and clutch pedal. Length: 3.75 inches. Width: 2.375 inches.

$27.20/pr.
In Stock
Brake and clutch pedal bumper

p/n: 60-0579-24

Bumper, brake or clutch pedal to floorboard. Longer type with one and three eighths (1-3/8) inch clearance for pedal shaft.Length: 2.75 inches.

$26.70/pr.
In Stock
Door weatherstrip

p/n: 60-0078-73

Weatherstrip, lower door. Heavy type with original ribbing and retainer lip.

$25.10/pr.
In Stock
Hood bumper kit

p/n: 33-0680-42

Hood bumper set. Kit includes two (2) each of our #33-0123-42 bumpers and six (6) each of our #33-0459-42 bumpers.

$20.90/set
In Stock
Firewall grommet

p/n: 60-0276-45

Grommet, firewall, throttle rod and tube, oil pressure gauge pipe, heat indicator tube and choke rod. One and seven sixteenths (1-7/16) inch outside diameter.

$20.80/ea.
In Stock
Starter button cover

p/n: 60-0166-21

Cover, starter pedal button. Rubber slip over type for old metal. Two (2) inch outside diameter. If car doesn't have old metal, see our #60-0322-21.

$20.20/ea.
In Stock
Cowl vent hose

p/n: 60-0381-54

Hose, cowl vent drain.Length: 7.25 inches.

$19.10/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Firewall grommet

p/n: 60-0057-21

Grommet, wiring harness through firewall, for one and one fourth (1-1/4) inch hole in sheet metal.Height: .75 inches.

$15.10/ea.
In Stock
Shock and stabilizer bushing

p/n: 50-0220-32

Bushing, for shock absorber link cross pin or stabilizer link cross pin.1931-36 Bushing, rubber, for shock absorber link cross pin, #41151.

$11.90/ea.
In Stock
Gearshift bushing

p/n: 60-0237-24

Bushing, gearshift shaft lever, larger type. Three eighths (3/8) inch inside diameter by nine sixteenths (9/16) inch outside diameter barrel.Height: .

$10.80/ea.
In Stock
Steering column seal

p/n: 60-0435-32

Seal, steering column at toe pan, sponge.Length: 5.375 inches. Height: .25 inches.

$10.80/ea.
Made to Order Takes 2-3 Days
Wiring grommet

p/n: 70-0355-14

Grommet, electric wire into light body under fenders, for headlights, taillights, some parking lights and auxiliary (fog) lights. Fits seven eighths (7/8) inch hole in light body. Two (2) to eight (8) per car as required.

$10.60/ea.
In Stock
Rear spring bushing

p/n: 60-0236-48

Bushing, body shackles.Length: 1.125 inches.

$6.40/ea.
In Stock
Tie rod dust cover

p/n: 60-0096-32

Dust seal, tie rod ends. Four (4) required per vehicle.

$6.40/ea.
In Stock
Hood side bumper

p/n: 70-2617-42

Bumper, hood side upper. Fully molded, authentic configuration for 1/4" hole. Six (6) typically required per vehicle. Note: This part is included in our 90-0213-90 Body Bumper

$6.30/ea.
In Stock
Shock and stabilizer grommet

p/n: 70-0274-33

Grommet, shock and stabilizer link. Eight (8) required per car. Fully molded rubber with locating collar. One and one sixteenth inch (1 1/16") outside diameter by nine sixteenths inch (9/16") locating collar outside diameter by three eighths inch (3/8") i

$6.30/ea.
In Stock
Pressure ring

p/n: 70-0261-69

Pressure ring (washer), sponge rubber, interior door handle and window regulator escutcheon. One and three fourths (1-3/4) inches outside diameter by three eighths (3/8) inch thick.

$5.90/ea.
In Stock
Shock absorber arm bushing

p/n: 60-0106-32

Bushing, shock absorber arm link.

$5.90/ea.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
Made to Order Takes 2-3 Days
Door weatherstrip

p/n: 70-0219-73

Weatherstrip, door edge, constant section on some models. Five eighths (5/8) inch by (5/8) inch cross-section, high grade, fine grain sponge rubber.

$5.30/ft.
In Stock
Peel-N-Stick Door Weatherstrip

p/n: 70-0145-WT

Door edge weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Excellent for use in many different applications and on many different vehicle models.

$5.30/ft.
In Stock
Shock absorber grommet

p/n: 60-0235-33

Grommet, shock absorber mounting, plain cylinder type with flat ends.

$5.30/ea.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0145-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.00/ft.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Flexible run channel

p/n: 60-0451-58

Retainer clip for flexible run channel. For sides and top of side window. Tempered spring steel.Length: 1.3125 inches. Width: .5625 inches.

$4.60/ea.
In Stock
Run Channel Clip

p/n: 60-0374-58

Clip, end of door window run channel. Tempered spring steel. Length: 1.8125 inches. Width: .50 inches.

$4.60/ea.
In Stock
Taillight lens gasket

p/n: 70-3770-15

Gaskets, tail light lens. Die cut cork to authentic original dimensions.

$4.30/pr.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Shock absorber bushing

p/n: 70-0541-33

Bushing, shock absorber mounting. Five eighths (5/8) inch hole, one and one fourth (1-1/4) inch outside diameter, five eighths (5/8) inch thick.

$4.10/ea.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Firewall grommet

p/n: 32-0162-21

Grommet, utility. Sheet Metal Hole: 3/4" Center Hole: 1/4" Outside Diameter: 15/16" Slot Width: 1/16"

$3.90/ea.
In Stock
Shock absorber bushing

p/n: 70-0547-32

Bushing, shock absorber mounting. Double cone style, rear. Five eighths (5/8) inch hole, one and one sixteenths (1-3/16) inch outside diameter, three fourth (3/4) inch thick.

$3.50/ea.
In Stock
Parking brake grommet

p/n: 32-0537-24

Grommet, parking brake release rod. Sheet Metal Hole: 7/16" Center Hole: 1/4" Outside Diameter: 3/4" Slot Width: 1/16"

$3.00/ea.
In Stock
Hood & Door bumper

p/n: 33-0459-42

Bumper, hood to cowl and door hinge pillar upper. May be used in both places.

$2.90/ea.
In Stock
Hood rest pad

p/n: 33-0123-42

Pad, hood rest, front, to radiator header bar (top of grille).

$2.60/ea.
In Stock
Shock Absorber Arm Bushing

p/n: 60-0216-33

Bushing, for double acting shock absorber arm link. Height: .78125 inches.

$2.60/ea.
In Stock
Standard Bumper

p/n: 33-0128-88

Standard Bumper - Commonly used for fuel filler or glovebox doors.

$1.00/ea.
In Stock
License plate bumper

p/n: 60-0734-71

Bumper, door or license frame to trunk.

$0.90/ea.
In Stock