Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

72 items found matching 1957 Pontiac Super Chief 2 door Hardtop
Glass Weatherstrip Kit

p/n: 90-3022-90

This kit includes the weatherstrip components needed for the glass on your restoration project.

$656.29/set
Kit
Body Weatherstrip Kit

p/n: 90-3031-90

This kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.

$408.19/set
Kit
Front Door weatherstrip

p/n: 60-0248-72

Door edge weatherstrip with molded ends. This part is the primary door to body weatherstrip. Includes pins and fasteners for easy installation.

$187.99/pr.
In Stock
Front Door Vent Window Kit

p/n: 90-0403-90

This four (4) piece Front Door Vent Window Weatherstrip set is designed from the original parts for superior fitment and seal. This Kit contains the main vent window seals and division post seals.

$161.39/set
Kit
Motor mount service

p/n: 27-0044-11

Insulator, engine support rear, right and left. For models with a manual transmission. Revulcanization service only.

$131.69/pr.
Call or Email
Windshield Gasket

p/n: 60-0266-50

This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding.

$120.89/ea.
In Stock
Front Door Vent Window Weatherstrips

p/n: 38-0061-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$119.99/pr.
In Stock
Rear Window Gasket

p/n: 60-0265-81

This rear window gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit.

$115.49/ea.
In Stock
Motor mount service

p/n: 25-0063-11

Motor mount, upper, engine bracket at front cross member. One (1) per vehicle. Revulcanization service only.Length: 6.1875 inches. Width: 2.875 inches.

$99.69/ea.
Call or Email
Front suspension bumper

p/n: 27-0080-32

Bumper, front suspension lower A-arm.

$95.39/pr.
In Stock
Rigid Run Channel

p/n: 70-0536-58

Rigid, bright beaded edge, mohair lined channel, die trimmed and formed at top. Available in 29" pairs.

$88.99/pr.
In Stock
Trunk Weatherstrip - Clipped

p/n: 70-1123-85

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter and directly to the trunk lid using properly spaced plastic clips.

$73.79/ea.
In Stock
U Jamb lock pillar filler

p/n: 60-0570-79

Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.

$66.49/pr.
In Stock
Door Auxiliary Weatherstrip

p/n: 60-0342-73

Weatherstrip, front door, auxiliary on door front at beltline, right and left. Held on by button fasteners (our #50-0198-73, four (4) each included in set). Also known as a "J" seal.

$62.89/set
In Stock
Door weatherstrip

p/n: 70-0552-73

Weatherstrip, front door, auxiliary on body above beltline, hinge pillar windshield post. Two (2) strips, each thirteen and three eighths (13-3/8) inches long with retaining clips.

$62.69/pr.
In Stock
Stabilizer bushing

p/n: 27-0085-34

Bushings, for stabilizer bracket. Fully molded rubber. Correct dimensions, not an aftermarket replacement. One and three fourths inch (1 3/4') length by one and three eighths inch (1 3/8") width by three fourths inch (3/4") inside hole diameter by one and

$54.89/pr.
In Stock
Motor (Engine) Mount

p/n: 25-0060-11

Motor (engine) mount, lower front. One (1) per car. Length: 4.50 inches.

$54.29/ea.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

$54.29/pr.
In Stock
Beltline Weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Bend to fit. Available in a 3ft pair.

$51.59/pr.
In Stock
Trunk Weatherstrip

p/n: 70-1122-85

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid. The seal glues directly to the trunk lid.

$51.39/ea.
In Stock
Vent division bar weatherstrip

p/n: 60-0473-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$49.89/pr.
In Stock
Headlight Mounting Pad

p/n: 70-0201-14

Headlight body mounting gasket. Rubber.

$44.49/pr.
In Stock
Fenderskirt edge seal

p/n: 60-0201-45

Steele Rubber Products has the best quality Fenderskirt edge seal for your Street Rod or Custom Build project. Made from top-quality rubber to ensure durability and proper seal.

$43.29/pr.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$42.29/ea.
In Stock
Rigid Run Channel

p/n: 70-0516-58

Channel, rigid run, lower side window below beltline, zinc plated steel with black cloth lining. Available in 15" pairs.

$38.99/pr.
In Stock
Seal, taillight to body

p/n: 70-2856-15

Seal, taillight to body

$36.49/pr.
In Stock
Roof rail filler

p/n: 60-0429-73

Filler, side roof rail. Front corner, just in front of flipper seal. Right and left, solid brass core, molded screw holes. Outer at quarter window.

$34.69/pr.
In Stock
Door Flipper Stop

p/n: 70-2853-62

This Door Flipper Stop is designed from the original part for superior fitment and seal. The rear flipper stop mounts inside the flipper opening at the very rear of the door flipper.

$33.39/pr.
In Stock
Roof rail filler

p/n: 70-1763-73

Weatherstrip seal, roof rail, outer at quarter window.Length: 1.125 inches. Width: .75 inches.

$29.19/pr.
In Stock
Headlight Outer Rim Seal

p/n: 27-0063-14

Headlight Outer Rim Seal - Used to seal the headlight beam retainer ring. Replaces # 5945844.

$28.69/pr.
In Stock
Rear bumper filler

p/n: 27-0095-30

Filler, rear bumper to body. Die cut three thirty seconds (3/32) inch rubber to original profile.

$26.29/pr.
Made to Order Takes 2-3 Days
Quarter Window Leading Edge Weatherstrip

p/n: 70-0141-58

This Leading Edge Vertical Weatherstrip seal pair is designed from the original part for superior fitment and seal. Slides into metal retaining channel attached to rear side window and seals between the front door window and the rear quarter window.

$23.99/pr.
In Stock
Body mounting pad

p/n: 27-0092-48

Insulator, body mounting pad. Metal core & locating collar covered with rubber. Two inch (2") square by fifteen sixteenths inch (15/16") locating collar outside diameter by five eighths inch (5/8") locating collar inside hole diameter. Seven sixteenths in

$23.59/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$20.39/ea.
In Stock
Rocker panel dust shield cover

p/n: 70-2392-45

Cover, rocker panel inner dust shield. Fully molded with proper attaching teeth and flap.

$19.89/pr.
In Stock
Hood bumper

p/n: 27-0056-42

Bumper, hood side to fender ledge. Not all models used the same number of these, so check your car to see how many you need.Width: 1.0 inches.

$14.49/ea.
In Stock
Antenna mount pad

p/n: 27-0107-21

Pad, antenna mounting.

$13.99/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.99/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$11.79/sqf
In Stock
Wiring grommet

p/n: 70-0355-14

Grommet, electric wire into light body under fenders, for headlights, taillights, some parking lights and auxiliary (fog) lights. Fits seven eighths (7/8) inch hole in light body. Two (2) to eight (8) per car as required.

$11.49/ea.
In Stock
Window Stop Stem Bumper

p/n: 33-0622-62

Bumper, window stop. One and one fourth (1-1/4) inch square by one half (1/2) inch thick. Compare with our #33-0540-62 and #33-0675-62.Length: 1.

$10.39/ea.
In Stock
Glovebox link bumper

p/n: 50-0367-88

Bumper, glove box check link. Fits on glove box door arm as needed.Length: .75 inches. Width: .5625 inches. Height: .3125 inches.

$8.59/ea.
In Stock
Window Stop Stem Bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$8.59/ea.
In Stock
Tie rod dust cover

p/n: 70-0537-32

Dust cover, tie rod ends.

$8.49/ea.
In Stock
Body Bolt Cushion

p/n: 60-0189-48

Pad, for each body bolt under frame bracket, to cushion washer and nut. Fully molded rubber. One and seven eighths inch (1 7/8") outside diameter by seven eighths inch (7/8") inside hole diameter by nine sixteenths inch (9/16) height.

$8.29/ea.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1112-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$7.99/ft.
In Stock
Side window roller

p/n: 70-0117-62

Anti-rattle roller, side windows. Rubber only, replaces original perfectly and easily. Fits both styles of brackets.

$7.99/ea.
In Stock
Brown door lock knob

p/n: 70-0660-70

Knob or push button for inside door lock, fits over 1/8" steel rod to door lock. Hard brown rubber, may be lacquered other colors as required.

$7.69/ea.
In Stock
2-5/8" Run Channel Mohair Liner

p/n: 70-2863-58

Run channel liner helps reline guide bars on lock side of hardtops and convertibles. Available by the foot.

$6.99/ft.
In Stock
Brown door lock knob

p/n: 70-0354-70

Knob for inside door lock control rod. Neutral brown color rubber, 3/32 inch hole. See also our #70-0660-70.

$6.89/ea.
In Stock