Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

87 items found matching 1958 Buick Limited 4 door Hardtop
Body Weatherstrip Kit

p/n: 90-3276-90

This kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.

$997.60/set
$897.59/set
10% discount
Kit
Front Door weatherstrip

p/n: 70-0805-72

Door edge weatherstrip with molded ends. This part is the primary door to body weatherstrip. Includes clips and pins for easy installation.

$279.29/set
In Stock
Front Door Vent Window Kit

p/n: 90-0422-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$268.20/set
$254.69/set
5% discount
Kit
Rear door weatherstrip

p/n: 70-0571-72

Door edge weatherstrip with molded ends, rear doors. This part is the primary door to body weatherstrip. Includes clips and pins for easy installation.

$224.79/set
In Stock
Motor mount service

p/n: 70-1774-11

Motor mount. Revulcanization service only. Center holes measure two and seven eighths (2-7/8) inches apart.Length: 5.375 inches.

$222.99/pr.
Call or Email
Rear door vent weatherstrip

p/n: 38-0088-74

Weatherstrip, rear door vent window. Order our #70-0783-74 division post weatherstrip separately.

$216.99/pr.
In Stock
Front Door Vent Window Weatherstrips

p/n: 38-0087-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$214.69/pr.
In Stock
Hardtop roof rail weatherstrip

p/n: 70-0534-68

Hardtop roof rail weatherstrip. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.

$202.69/pr.
In Stock
Windshield Gasket

p/n: 70-0762-50

This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.

$202.69/ea.
Made to Order Takes 2-3 Days
Rear Window Gasket

p/n: 50-0191-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$180.79/ea.
In Stock
Motor mount service

p/n: 50-0273-11

Motor mount, front. Revulcanization service only.Width: 4.875 inches.

$164.49/pr.
Call or Email
Steering column floorplate

p/n: 50-0412-36

Floorplate, steering column. Metal core just like the original.

$157.39/ea.
In Stock
Rear axle suspension bumper

p/n: 70-2638-35

Bumper, rear axle. Fully molded with new rubber vulcanized to new steel cores. Used on all models with conventional spring suspension.

$148.99/pr.
In Stock
Transmission mount service

p/n: 50-0264-25

Support pad, transmission mount (insulator). Revulcanization service only.Length: 5.0 inches. Width: 2.0 inches.

$112.59/ea.
Call or Email
Torque ball service

p/n: 50-0190-27

Retainer, torque ball, heavy steel jacket with molded rubber inner collar. Revulcanization service only.

$104.49/ea.
Call or Email
Rigid Run Channel

p/n: 70-0536-58

Rigid, bright beaded edge, mohair lined channel, die trimmed and formed at top. Available in 29" pairs.

$92.59/pr.
In Stock
Axle rebound pad

p/n: 50-0370-35

Bumper, rear axle stop. Molded left and right. Revulcanization service only.

$91.59/pr.
Call or Email
Support arm bumper

p/n: 50-0526-32

Bumper, lower support arm. With metal core and attaching bolt. One (1) pair per car.Width: 2.4375 inches. Height: 4.0 inches.

$82.79/pr.
Made to Order Takes 2-3 Days
Run channel upper bumper

p/n: 70-1629-62

Bumper, upper division post.Length: 1.5 inches. Width: .5625 inches.

$72.89/pr.
In Stock
U Jamb lock pillar filler

p/n: 70-1907-79

Rear door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal. Fully molded authentic rubber construction with metal core. For rear doors.

$65.99/pr.
In Stock
Door weatherstrip

p/n: 70-0552-73

Weatherstrip, front door, auxiliary on body above beltline, hinge pillar windshield post. Two (2) strips, each thirteen and three eighths (13-3/8) inches long with retaining clips.

$65.29/pr.
In Stock
Door weatherstrip

p/n: 70-0551-73

Weatherstrip, front door auxiliary, on door at beltline, right and left. Uses snap-in fasteners, four (4) each included.

$64.99/set
In Stock
Headlight to fender gasket

p/n: 70-1756-14

Gasket, headlight to fender.Width: 13.0 inches.

$59.69/pr.
Made to Order Takes 2-3 Days
Rear coil spring pad

p/n: 50-0359-35

Insulators, rear coil spring. Fabric reinforced rubber as original. One (1) pair per car.

$58.69/pr.
Made to Order Takes 2-3 Days
Transmission mount service

p/n: 50-0186-25

Insulator, engine support at transmission. Revulcanization service only.Length: 7.375 inches. Width: 1.75 inches. Height: 1.5 inches.

$58.49/ea.
Call or Email
Run Channel Upper Bumper

p/n: 60-0183-62

Bumper, side window glass in vent frame at top, right and left, brass core.Length: 1.625 inches.

$57.29/pr.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

$56.59/pr.
In Stock
Power brake pedal pad

p/n: 50-0406-22

Pad, power brake pedal. Available in BLACK only, "Power Brake" written with white lettering.Width: 5.5 inches. Height: 2.625 inches.

$56.19/ea.
In Stock
Beltline Weatherstrip

p/n: 70-0651-58

Rigid, rubber covered weatherstrip with flock lining and one fourth (1/4) inch chrome edge. Available in a 6ft piece.

$55.99/ea.
In Stock
Side window leading edge

p/n: 70-0904-80

Side window vertical leading edge weatherstrip.

$54.99/pr.
In Stock
Vent division bar weatherstrip

p/n: 70-0703-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$53.49/pr.
In Stock
Headlight seal

p/n: 70-1465-14

Seal, headlight outer rim to sealed beam retainer ring. Possible fit for models with dual headlights.Width: .375 inches. Height: .9375 inches.

$52.29/set
In Stock
Front Coil Spring Pad

p/n: 50-0476-35

Pad, front coil spring insulator, upper. Two (2) per car, five and one eighths (5-1/8) inch outside diameter. Height: .28125 inches.

$51.89/pr.
In Stock
Front stabilizer bushing

p/n: 50-0094-34

Bushings, front stabilizer shaft-to-frame or stabilizer shaft, front or rear. Fully molded rubber. One and one half inch (1 1/2") length by one and one half inch (1 1/2") width by eleven sixteenths inch (11/16") inside hole diameter by one and one half in

$51.89/pr.
In Stock
Taillight lens gasket

p/n: 50-0197-15

Gasket, taillight lens, one fourth (1/4) inch thick sponge rubber.

$50.19/pr.
Made to Order Takes 2-3 Days
Door handle gasket kit

p/n: 50-0193-69

Gasket set, front and rear door handle.

$47.49/set
In Stock
Side Window Sash Channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$45.39/ea.
In Stock
Parking and signal lens gasket

p/n: 50-0192-16

Gasket, parking light lens and turn signal lens, front.

$44.99/pr.
Made to Order Takes 2-3 Days
Rigid Run Channel

p/n: 70-0516-58

Channel, rigid run, lower side window below beltline, zinc plated steel with black cloth lining. Available in 15" pairs.

$41.79/pr.
In Stock
Parking brake pedal pad

p/n: 50-0405-22

Pad, parking brake pedal. With "PARK" written on pad. Black only. For pedal pad without "PARK" written on pad see our #50-0348-22.Width: 2.0625 inches.

$38.99/ea.
Made to Order Takes 1-2 Days
Body mounting pad

p/n: 50-0506-48

Pad, body mounting. Rubber with metal core, locating collar and metal sleeve as original. Metal sleeve is removable, measures one and one eighth inch (1 1/8") long when removed. Part dimensions with metal sleeve inserted are: One and seven eighths inch (1 7/8")

$22.79/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$21.89/ea.
In Stock
Body mounting pad

p/n: 50-0508-48

Pad, body mounting. Rubber with metal nut and washer molded in. One and seven eighths inch (1 7/8") outside diameter by thirteen sixteenths inch (13/16") nut outside length by seven sixteenths inch (7/16") inside hole diameter. Three fourths inch (3/4") c

$21.49/ea.
In Stock
Door handle gasket kit

p/n: 50-0515-69

Gasket set, outside door handle. Six (6) piece set for two (2) doors.

$20.39/set
In Stock
Hood bumper

p/n: 50-0194-42

Bumper, hood side on fender ledge center. Self retaining type. See our #50-0095-42 for rear type.Height: 1.625 inches.

$17.49/ea.
In Stock
Body mounting pad

p/n: 50-0096-48

Pad, body mounting. Fully molded rubber with steel core and locating collar. Two inch (2") square by one and one eighth inch (1 1/8") locating collar outside diameter by eleven sixteenths inch (11/16") locating collar inside diameter by one half inch (1/2

$16.99/ea.
In Stock
Rear coil spring pad

p/n: 50-0304-35

Insulator, rear coil spring clamp bolt (upper end). Two (2) per car. Fabric reinforced rubber as original.

$16.99/ea.
In Stock
Glovebox door check grommet

p/n: 70-0968-88

Grommet, glove box door cushion. One and three quarters long (1-3/4") and thirteen sixteenths (13/16")wide.Length: 1.75 inches. Width: .8125 inches.

$16.39/ea.
In Stock
Spring Insulator, rear

p/n: 70-3281-35

Spring Insulator, rear

$15.99/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$12.89/ea.
In Stock