Search Results

84 items found matching 1959 Buick LeSabre 2 door Hardtop
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Body Weatherstrip Kit

p/n: 90-3139-90

This kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.

$565.50/set
$509.00/set
10% discount
Kit
Motor mount service

p/n: 70-1774-11

Motor mount. Revulcanization service only. Center holes measure two and seven eighths (2-7/8) inches apart.Length: 5.375 inches.

$214.10/pr.
Call or Email
Rear Window Gasket

p/n: 60-0528-81

This rear window gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit.

$196.70/ea.
In Stock
Hardtop roof rail weatherstrip

p/n: 70-0611-68

Hardtop roof rail weatherstrip. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.

$190.80/set
In Stock
Front Door weatherstrip

p/n: 70-0745-72

Door edge weatherstrip with molded ends. This part is the primary door to body weatherstrip. It has molded ends and includes 6 pins and 24 sockets for easy installation. Made of top quality rubber.

$172.00/pr.
In Stock
Front Door Vent Window Kit

p/n: 90-0410-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$172.70/set
$164.10/set
5% discount
Kit
Rear Window Gasket

p/n: 60-0498-81

This rear window gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit.

$163.90/ea.
In Stock
Windshield Gasket

p/n: 70-0671-50

This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.

$150.90/ea.
In Stock
Transmission mount service

p/n: 50-0429-25

Transmission mount. Revulcanization service only.Length: 8.0 inches. Width: 3.0625 inches.

$132.90/ea.
Call or Email
Front Door Vent Window Weatherstrips

p/n: 38-0071-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$126.60/pr.
In Stock
Transmission mount service

p/n: 50-0264-25

Support pad, transmission mount (insulator). Revulcanization service only.Length: 5.0 inches. Width: 2.0 inches.

$105.90/ea.
Call or Email
Torque ball service

p/n: 50-0190-27

Retainer, torque ball, heavy steel jacket with molded rubber inner collar. Revulcanization service only.

$97.40/ea.
Call or Email
Rigid run channel

p/n: 70-0536-58

Run channel, front door window, for full length of division bar (approximately twenty nine (29) inches). Rigid, bright beaded edge, mohair lined channel, die trimmed and formed at top.

$85.50/pr.
In Stock
Support arm bumper

p/n: 50-0526-32

Bumper, lower support arm. With metal core and attaching bolt. One (1) pair per car.Width: 2.4375 inches. Height: 4.0 inches.

$76.30/pr.
In Stock
Front Inner Fender Splash Apron Kit

p/n: 70-4055-45

Front Inner Fender Splash Apron Kit - A twelve piece (12) kit. Pieces attach to front inner fender panels. Made from original fabric reinforced masticated rubber to ensure durability and proper seal.

$74.60/set
In Stock
Door weatherstrip hinge pillar

p/n: 60-0326-73

Weatherstrip, front door opening. Auxiliary on door hinge pillar at beltline, right and left. Sometimes called "L" or "J" strips. Fully molded with authentic configuration to help guide water to the outside of vehicle. Set includes four (4) button-type fa

$57.80/set
In Stock
Run channel upper bumper

p/n: 70-0565-62

Bumper, side window glass.

$54.40/pr.
In Stock
Rear coil spring pad

p/n: 50-0359-35

Insulators, rear coil spring. Fabric reinforced rubber as original. One (1) pair per car.

$54.10/pr.
In Stock
Transmission mount service

p/n: 50-0186-25

Insulator, engine support at transmission. Revulcanization service only.Length: 7.375 inches. Width: 1.75 inches. Height: 1.5 inches.

$53.90/ea.
Call or Email
Rear bumper weatherstrip

p/n: 70-1581-30

Weatherstrip, rear bumper to body. Two, thirty two (32) inch pieces.

$52.60/pr.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Channel, rigid run, window division bar. Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar.

$52.10/pr.
In Stock
Lock pillar filler

p/n: 70-0782-79

Door lock pillar seal. One and five eighths inch (1-5/8") wide and two and three quarter inches (2-3/4") high. This part seals the bottom of the rear side window, and may also be known as a door jamb seal. Fully molded authentic rubber construction with m

$51.40/pr.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0773-WT

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.

$49.50/ea.
In Stock
Vent division bar weatherstrip

p/n: 60-0636-56

Front vent window division post seal. Fully molded with metal core and attaching tabs. This part fits opposite the glass run channel and seals the vent window when the vent is closed. See Front door vent weatherstrip for main rubber seal.

$46.10/pr.
In Stock
Front Coil Spring Pad

p/n: 50-0476-35

Pad, front coil spring insulator, upper. Two (2) per car, five and one eighths (5-1/8) inch outside diameter. Height: .28125 inches.

$44.70/pr.
In Stock
Window Sash / Beltline Channel

p/n: 70-0651-58

Weatherstrip, window sash channel (beltline), inner. Rigid, rubber covered weatherstrip with flock lining and one fourth (1/4) inch chrome edge. Used on front door, rear door and rear quarter window. Six (6) foot strip.

$40.50/ea.
In Stock
Trunk Weatherstrip

p/n: 70-0773-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$39.50/ea.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$39.10/ea.
In Stock
Rigid run channel

p/n: 70-0516-58

Channel, rigid run, lower side window below beltline, zinc plated steel with black cloth lining, one half (1/2) inch deep by one half (1/2) inch wide, fifteen (15) inches long.

$36.10/pr.
In Stock
Hood to cowl weatherstrip

p/n: 50-0495-43

Weatherstrip, hood to cowl.

$31.90/ea.
In Stock
Wiper Transmission Gasket

p/n: 60-0593-53

Wiper Transmission Gasket - This is the seal for the wiper motor crank. For two (2) speed wiper motors only. These parts are made of the highest quality and authenticity. Replaces # 4906021.

$31.40/ea.
In Stock
Radiator mounting pad

p/n: 50-0529-31

Pad, radiator body mounting. Made with molded-in metal washer like original.Height: .75 inches.

$31.30/ea.
In Stock
Quarter Window Leading Edge Weatherstrip

p/n: 70-0141-58

This Leading Edge Vertical Weatherstrip seal pair is designed from the original part for superior fitment and seal. Slides into metal retaining channel attached to rear side window and seals between the front door window and the rear quarter window.

$22.10/pr.
In Stock
Door bumper

p/n: 70-1455-41

Bumper, fuel filler door.Length: 5.4375 inches. Width: .75 inches.

$21.30/ea.
In Stock
Door handle gasket kit

p/n: 70-0925-69

Gasket set, outside door handle. Die cut rubber construction. Six (6) piece set for two (2) handles.

$21.00/set
In Stock
Body mounting pad

p/n: 50-0506-48

Pad, body mounting. Rubber with metal core, locating collar and metal sleeve as original. Metal sleeve is removable, measures one and one eighth inch (1 1/8") long when removed. Part dimensions with metal sleeve inserted are: One and seven eighths inch (1 7/8")

$19.50/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Body mounting pad

p/n: 50-0508-48

Pad, body mounting. Rubber with metal nut and washer molded in. One and seven eighths inch (1 7/8") outside diameter by thirteen sixteenths inch (13/16") nut outside length by seven sixteenths inch (7/16") inside hole diameter. Three fourths inch (3/4") c

$18.50/ea.
In Stock
Body mounting pad

p/n: 70-2165-48

Pad, body mount, lower bolt retaining. Rubber with metal washer molded in. One and three fourths inch (1 3/4") outside diameter by one inch (1") inside diameter with one half inch (1/2") hole through center of retaining washer that is molded in by seven e

$15.40/ea.
In Stock
Folding seat bumper

p/n: 70-2579-88

Bumper, folding front seat frame rest cushion. Manufactured from dense rubber with a molded in metal retaining washer. Two (2) used per car.

$13.90/ea.
In Stock
Spring Insulator, rear

p/n: 70-3281-35

Spring Insulator, rear

$13.90/ea.
In Stock
Antenna grommet

p/n: 50-0513-21

Grommet, antenna lead through sheet metal.

$12.90/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.00/ea.
In Stock
Body mounting pad

p/n: 50-0507-48

Pad, body mounting. Fully molded rubber. Two inches (2") outside diameter by seven eighths inch (7/8") inside hole diameter by three fourths inch (3/4") height.

$10.90/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Strut rod bushing

p/n: 50-0522-27

Bushing, strut rod at drive shaft tube. Two (2) per car required.Length: 1.65625 inches.

$10.80/ea.
In Stock
Hood bumper

p/n: 50-0489-42

Bumper, hood to fender ledge. Number required varies. Molded rubber type.Width: 1.5 inches. Height: 1.0 inches.

$10.60/ea.
In Stock
Hood bumper

p/n: 50-0205-42

Bumper, adjustable type, hood front. Cadmium plated bolt (5/16)-18 x 1-1/4", rubber bumper 1-1/8" in diameter, 5/8" thick.Height: 1.875 inches.

$9.40/ea.
In Stock
Glovebox link bumper

p/n: 50-0367-88

Bumper, glove box check link. Fits on glove box door arm as needed.Length: .75 inches. Width: .5625 inches. Height: .3125 inches.

$7.90/ea.
In Stock
Window stop stem bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$7.90/ea.
In Stock
Tie rod dust cover

p/n: 70-0537-32

Dust cover, tie rod ends.

$7.80/ea.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1112-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$7.40/ft.
In Stock
Shift lever grommet

p/n: 50-0284-24

Grommet, shift lever insulator. One (1) per car. Three eighths (3/8) inch inside diameter by five eighths (5/8) inch barrel by one half (1/2) inch long.

$7.30/ea.
In Stock
Brown door lock knob

p/n: 70-0660-70

Knob or push button for inside door lock, fits over 1/8" steel rod to door lock. Hard brown rubber, may be lacquered other colors as required.

$7.00/ea.
In Stock
Hood bumper

p/n: 50-0473-42

Bumper, hood to fender. Extruded rubber type.Width: .75 inches. Height: 1.0 inches.

$6.90/ea.
In Stock
Run channel mohair liner

p/n: 70-2863-58

Liner, mohair. Liner with a rubber backing. Apply with adhesive to division bars and channels. Helps reline guide bars on lock side of hardtops and convertibles.

$6.39/ft.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0510-WT

Peel-N-Stick Trunk Weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Makes for an easier installation of deck lid weatherstripping. Also excellent for use in many different applications and on many different vehicle models.

$6.20/ft.
Made to Order Takes 2-3 Days
Trunk Weatherstrip

p/n: 70-0346-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.

$6.20/ft.
In Stock
Trunk Weatherstrip

p/n: 70-0510-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.

$5.90/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
Made to Order Takes 2-3 Days
Body hole plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$5.70/ea.
In Stock
Door Weatherstrip w/o Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1111-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.50/ft.
In Stock
Door drain hole seal

p/n: 70-1042-70

Weatherstrip, door bottom drain hole.Length: 3.625 inches. Width: .40625 inches.

$5.30/pr.
In Stock
Utility Plug

p/n: 35-0099-20

Plug, utility, various uses.

$5.00/ea.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Firewall retainer

p/n: 60-0586-20

Retainer, firewall insulation panel. "Christmas Tree" style popular during this time. Constructed of vinyl plastic. Up to ten (10) required per car.

$4.60/ea.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Door or tailgate bumper

p/n: 33-1228-71

Bumper pads, door or tailgate. Twin retainer style. Three eighths (3/8) inch by seven eighths (7/8) inch by one half (1/2) inch high.

$4.20/ea.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Door bumper

p/n: 33-1227-71

Bumper, door edge, twin retainer style, three eighths (3/8) inch wide by seven eighths (7/8) inch long by three eighths (3/8) inch high.

$3.50/ea.
In Stock
Firewall Grommet

p/n: 35-0369-20

Grommet, shroud or cowl upper panel gauge holes and for various body holes requiring grommet.

$3.40/ea.
In Stock
Floor pan plug

p/n: 35-0262-20

Plug, floor pan, rear compartment and body. Up to 12 per car, as required.

$3.30/ea.
In Stock
Trunk floor pan plug

p/n: 35-0070-87

Plug, trunk and floor pan drain hole. Buick 1950-65 Plug, trunk and floor pan drain hole.

$3.20/ea.
In Stock
Hood bumper

p/n: 70-0294-42

Bumper, hood rest, cap type for adjustable screw, fifteenth sixteenths (15/16) inch, seven sixteenths (7/16) inch thick.

$3.00/ea.
In Stock
Trunk bumper

p/n: 33-0293-87

Bumper, trunk and tailgate lid bumper support, on lid.

$2.80/ea.
In Stock
Door Bumper

p/n: 33-1234-71

Bumper, door side. One half (1/2) inch block height. Two (2) or four (4) used per car.

$2.50/ea.
In Stock
Door weatherstrip fastener

p/n: 50-0198-73

Fastener, door edge weatherstrip, steel. One half (1/2) inch long, thirteen thirty second (13/32) inch diameter head, black finish.

$2.50/ea.
In Stock
Standard bumper

p/n: 33-0136-42

Bumper, standard. See detail page for specific usage.

$2.50/ea.
In Stock
Door Bumper

p/n: 33-1233-71

Bumper, door side. Five eighths (5/8) inch block height. Two (2) or four (4) used per car.

$2.40/ea.
In Stock
Door Bumper

p/n: 33-1235-71

Bumper, door side. Three eighths (3/8) inch block height. Two (2) or four (4) used per car.

$2.40/ea.
In Stock
Door Bumper

p/n: 33-1232-71

Bumper, door side. Seven eighths (7/8) inch block height. Two (2) or four (4) used per car.

$2.40/ea.
In Stock
Hood weatherstrip clip

p/n: 70-0564-42

Fastener, hood to cowl weatherstrip (and other uses), self-retaining steel button, eleven sixteenths (11/16) inch head, for five sixteenths (5/16) inch hole but will fit down to one fourth (1/4) inch hole.

$2.40/ea.
In Stock
Lock cylinder gasket

p/n: 60-0641-69

Gasket, door or trunk lock cylinder. Exact reproduction

$2.10/ea.
In Stock