Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

78 items found matching 1960 Chevrolet Bel Air 2 door Hardtop
Body Weatherstrip Kit

p/n: 90-3137-90

This kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.

Rear Window Gasket

p/n: 60-0528-81

This rear window gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit.

In Stock
Hardtop roof rail weatherstrip

p/n: 70-0611-68

Hardtop roof rail weatherstrip. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.

In Stock
Front Door weatherstrip

p/n: 70-0745-72

Door edge weatherstrip with molded ends. This part is the primary door to body weatherstrip. It has molded ends and includes 6 pins and 24 sockets for easy installation. Made of top quality rubber.

In Stock
Front Door Vent Window Kit

p/n: 90-0410-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

Windshield Gasket

p/n: 70-0671-50

This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.

In Stock
Window Felt Weatherstrip

p/n: 80-0704-57

Original equipment style side window horizontal seal (also known as beltline weatherstrip). These strips wipe the side windows when the glass is lowered.

Allow 1-3 Weeks Ships Separately
Front Door Vent Window Weatherstrips

p/n: 38-0071-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

In Stock
Engine Mounts - S/B Chevrolet

p/n: 70-1633-11

Engine Mounts, front pair. Three (3) bolt S/B Chevrolet. New replacement part manufactured to meet or exceed factory specifications.

Ships in 5-7 Days
Front Stabilizer Kit

p/n: 60-0217-34

Link kit, full replacement, front stabilizer bar link. Twenty-two (22) piece set completely replaces links at both ends of stabilizer bar. Hex head bolt 5/16"-24nf x 7-3/4" long. Comes with metal sleeve, metal cup washers and rubber grommets.

In Stock
Door weatherstrip hinge pillar

p/n: 60-0326-73

Weatherstrip, front door opening. Auxiliary on door hinge pillar at beltline, right and left. Sometimes called "L" or "J" strips. Fully molded with authentic configuration to help guide water to the outside of vehicle. Set includes four (4) button-type fa

In Stock
Axle rebound pad

p/n: 60-0668-32

Bumper, rear axle. Made with metal core and 3/8-16 stud molded in.

Made to Order Takes 2-3 Days
Run channel upper bumper

p/n: 70-0565-62

Bumper, side window glass.

In Stock
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

In Stock
Beltline Weatherstrip

p/n: 70-0651-58

Rigid, rubber covered weatherstrip with flock lining and one fourth (1/4) inch chrome edge. Available in a 6ft piece.

In Stock
Lock pillar filler

p/n: 70-0782-79

Door lock pillar seal. One and five eighths inch (1-5/8") wide and two and three quarter inches (2-3/4") high. This part seals the bottom of the rear side window, and may also be known as a door jamb seal. Fully molded authentic rubber construction with m

In Stock
Transmission Mount

p/n: 70-2058-25

Transmission mount, rear. One (1) required per vehicle. Aftermarket replacement type.

Ships in 5-7 Days
Inner Fender Seal

p/n: 60-0288-45

Inner Fender Seal for anti-rattle, runningboard apron to body, or fender splash panels. Nine sixteenths (9/16) inch by seven eighths (7/8) inch slotted sponge rubber to accept rivets. Sold in eight (8) foot strips.

In Stock
Vent division bar weatherstrip

p/n: 60-0636-56

Front vent window division post seal. Fully molded with metal core and attaching tabs. This part fits opposite the glass run channel and seals the vent window when the vent is closed. See Front door vent weatherstrip for main rubber seal.

In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0773-WT

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.

In Stock
Fenderskirt edge seal

p/n: 60-0201-45

Steele Rubber Products has the best quality Fenderskirt edge seal for your Street Rod or Custom Build project. Made from top-quality rubber to ensure durability and proper seal.

In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

In Stock
Trunk Weatherstrip

p/n: 70-0773-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

In Stock
Rigid Run Channel

p/n: 70-0516-58

Channel, rigid run, lower side window below beltline, zinc plated steel with black cloth lining. Available in 15" pairs.

In Stock
Transmission mount service

p/n: 60-0465-25

Transmission mount. One (1) per car. Revulcanization service only.Length: 5.75 inches.

Call or Email
Wiper Transmission Gasket

p/n: 60-0593-53

Wiper Transmission Gasket - This is the seal for the wiper motor crank. For two (2) speed wiper motors only. These parts are made of the highest quality and authenticity. Replaces # 4906021.

In Stock
Brake master cylinder boot

p/n: 60-0180-24

Boot, brake master cylinder rod. Fits on one and one fourth (1-1/4) inch diameter cylinder. Height: 2.125 inches.

In Stock
Quarter Window Leading Edge Weatherstrip

p/n: 70-0141-58

This Leading Edge Vertical Weatherstrip seal pair is designed from the original part for superior fitment and seal. Slides into metal retaining channel attached to rear side window and seals between the front door window and the rear quarter window.

In Stock
Body mounting pad

p/n: 70-1749-48

Pad, body mounting. Fully molded rubber with metal core and locating collar. Two and five eighths inch (2 5/8") outside diameter by one and one eighth inch (1 1/8") locating collar outside diameter by one half inch (1/2") inside hole diameter. One inch (1

In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

In Stock
Rocker panel dust shield cover

p/n: 70-2392-45

Cover, rocker panel inner dust shield. Fully molded with proper attaching teeth and flap.

In Stock
Splash Apron / A-Arm Dust Shield

p/n: 70-2507-45

This two (2) piece Splash Apron / A-Arm Dust Shield Filler set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit over suspension a-arms and inside front inner fenders.

In Stock
Cowl Drain Gutter Hose Grommet

p/n: 33-0329-54

Grommet, cowl gutter drain hose. Nine sixteenth (9/16) inch hole through cowl side wall, five sixteenths (5/16) inch inside diameter. Two (2) per car.

In Stock
Window Regulator / Accelerator Rod Seal

p/n: 60-0652-70

This part is used as a front window regulator or accelerator rod through toe board seal. A front window regulator seal for 1955-60 passenger cars with electric windows and for 1957-62 Corvette models. Used as an accelerator rod through toeboard seal for 1955-62 V8 only Corvettes.

Made to Order Takes 1-2 Days
Folding seat bumper

p/n: 70-2579-88

Bumper, folding front seat frame rest cushion. Manufactured from dense rubber with a molded in metal retaining washer. Two (2) used per car.

In Stock
Exhaust system hanger

p/n: 60-0308-13

Insulator (support). Muffler/tailpipe system, strap type as original. One and three fourths (1-3/4) inch by three and five eighths (3-5/8) inch.

In Stock
Hood bumper

p/n: 60-0275-42

Bumper, hood side-to-fender. Stem retainer type.

In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

In Stock
Gearshift bushing

p/n: 60-0237-24

Bushing, gearshift shaft lever, larger type. Three eighths (3/8) inch inside diameter by nine sixteenths (9/16) inch outside diameter barrel.Height: .

In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

In Stock
Door handle gasket kit

p/n: 60-0640-69

Gasket set, outside door handle. Six (6) piece set for two (2) doors.

In Stock
Hood bumper

p/n: 50-0205-42

Bumper, adjustable type, hood front. Cadmium plated bolt (5/16)-18 x 1-1/4", rubber bumper 1-1/8" in diameter, 5/8" thick.Height: 1.875 inches.

In Stock
Window Stop Stem Bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1112-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

In Stock
Brown door lock knob

p/n: 70-0660-70

Knob or push button for inside door lock, fits over 1/8" steel rod to door lock. Hard brown rubber, may be lacquered other colors as required.

In Stock
2-5/8" Run Channel Mohair Liner

p/n: 70-2863-58

Run channel liner helps reline guide bars on lock side of hardtops and convertibles. Available by the foot.

In Stock
Tie rod dust cover

p/n: 60-0096-32

Dust seal, tie rod ends. Four (4) required per vehicle.

In Stock
Inner Fender Seal

p/n: 60-0667-45

Seal, inner fender to frame. Extruded rubber strip replacement. Available by the foot.

In Stock
Shock and stabilizer grommet

p/n: 70-0274-33

Grommet, shock and stabilizer link. Eight (8) required per car. Fully molded rubber with locating collar. One and one sixteenth inch (1 1/16") outside diameter by nine sixteenths inch (9/16") locating collar outside diameter by three eighths inch (3/8") i

In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0510-WT

Peel-N-Stick Trunk Weatherstrip made from high quality EPDM sponge rubber. Available by the foot.

Made to Order Takes 2-3 Days