Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

79 items found matching 1961 Chevrolet Bel Air 2 door Hardtop
Body Weatherstrip Kit

p/n: 90-3155-90

This kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.

$470.99/set
Kit
Front Door Vent Window Set

p/n: 90-0426-90

This four (4) piece Front Door Vent Window Set contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$201.49/set
Kit
Window Felt Weatherstrip

p/n: 80-0705-57

Original equipment style side window horizontal seal kit (also known as beltline weatherstrip). Eight (8) piece kit includes inner and outer felt beltline weatherstrip for each door and quarter windows.

$193.69/set
Allow 2-4 Weeks Ships Separately
Hardtop roof rail weatherstrip

p/n: 70-0902-68

Hardtop roof rail weatherstrip. This part fits on the roof of the vehicle and seals the side window when the window is fully raised. Includes two (2) clips.

$187.39/pr.
Made to Order Takes 5-7 Days
Front Door Weatherstrip

p/n: 70-0819-72

Door edge weatherstrip with molded ends. This part is the primary seal which seals the door to body. Includes four (4) pins and twenty-six (26) sockets for easy installation.

$174.49/pr.
In Stock
Windshield Gasket

p/n: 27-0055-50

This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.

$170.89/ea.
In Stock
Rear Window Gasket

p/n: 60-0634-81

This rear window gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit.

$168.59/ea.
In Stock
Front Door Vent Window Weatherstrips

p/n: 38-0092-55

These Front Door Vent Window Weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$156.99/pr.
In Stock
Steel sash channel

p/n: 70-0846-58

Channel, front window lower sash. Formed steel channel only, not chromed. Ready for attaching to your old brackets.

$108.99/pr.
In Stock
Cowl drain gutter

p/n: 70-0780-73

Gutter, windshield lower corner, left and right. Rubber with metal core as original. Seven and three quarters long (7-3/4").Length: 7.75 inches.

$90.39/pr.
In Stock
Engine Mounts - Small Block V8

p/n: 70-1633-11

This front Engine Mount pair are new replacement mounts manufactured to meet or exceed factory specifications. Three (3) bolt mounts for small block Chevrolet V8's.

$67.89/pr.
Ships in 5-7 Days
U Jamb lock pillar filler

p/n: 70-0982-79

Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.

$65.29/pr.
In Stock
Beltline Weatherstrips

p/n: 70-1121-61

These Beltline Weatherstrips (sometimes called "scraper seal") come in a three (3) foot pair. For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Available in 3ft pair.

$64.69/pr.
In Stock
Axle rebound pad

p/n: 60-0668-32

Bumper, rear axle. Made with metal core and 3/8-16 stud molded in.

$63.79/pr.
Made to Order Takes 5-7 Days
Front Stabilizer Bar End Link Set

p/n: 70-2109-33

A twenty-two (22) piece Front Stabilizer Bar End Link set. Comes complete with fasteners, metal sleeves, metal cup washers and black rubber bushings. One (1) end link set for both sides of stabilizer bar on one (1) car.

$61.99/set
In Stock
Beltline Weatherstrip

p/n: 70-1120-61

This Beltline Weatherstrip comes in a six (6) foot length for the outer beltline (sometimes called "scraper seal"). For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Available in 6ft lengths.

$59.99/ea.
In Stock
Beltline Weatherstrip Channel

p/n: 70-0651-58

This Beltline Weatherstrip Channel is a five (5) foot length of rigid channel with a flocked rubber lip and a flat stainless bead. Can be used as the inner beltline weatherstrip on front doors, rear doors and quarter windows.

$57.79/ea.
In Stock
Run Channel Upper Bumper

p/n: 70-1044-62

This run channel upper bumper is manufactured as original with brass metal core.

$56.49/pr.
In Stock
Side Window Leading Edge

p/n: 70-0832-80

Side window vertical leading edge weatherstrip.

$55.69/pr.
In Stock
Vent division bar weatherstrip

p/n: 70-0849-56

Front vent window division post seal. Eleven and one half inches (11.5") and one half inch high. Fully molded with metal core and attaching tabs.

$55.19/pr.
In Stock
Inner Fender Seal

p/n: 60-0288-45

Inner Fender Seal for anti-rattle, running board apron to body, or fender splash panels. Nine sixteenths (9/16) inch by seven eighths (7/8) inch slotted sponge rubber to accept rivets. Sold in eight (8) foot strips.

$54.59/ea.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0773-WT

This Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$51.19/ea.
In Stock
Hinge Seal

p/n: 70-1460-70

This hinge seal is installed on the front door hinge pillar at the beltline. These seals are sold as a pair for the left and right side.

$49.49/pr.
In Stock
Fenderskirt edge seal

p/n: 60-0201-45

Steele Rubber Products has the best quality Fenderskirt edge seal for your Street Rod or Custom Build project. Made from top-quality rubber to ensure durability and proper seal.

$47.89/pr.
In Stock
Transmission mount service

p/n: 60-0465-25

Transmission mount. One (1) per car. Revulcanization service only.Length: 5.75 inches.

$42.59/ea.
Call or Email
Trunk Weatherstrip

p/n: 70-0773-84

This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$40.89/ea.
In Stock
Wiper Transmission Gasket

p/n: 60-0593-53

Wiper Transmission Gasket - This is the seal for the wiper motor crank. For two (2) speed wiper motors only. These parts are made of the highest quality and authenticity. Replaces # 4906021.

$37.69/ea.
In Stock
Brake master cylinder boot

p/n: 60-0180-24

Boot, brake master cylinder rod. Fits on one and one fourth (1-1/4) inch diameter cylinder. Height: 2.125 inches.

$32.99/ea.
Made to Order Takes 5-7 Days
Transmission Mount

p/n: 70-2058-25

This Transmission Mount is a new aftermarket replacement mount manufactured to meet or exceed factory specifications.. One (1) required per vehicle.

$54.69/ea.
$30.69/ea.
44% discount
In Stock
Electrical terminal boot

p/n: 30-0279-41

Boot, electrical connection, generator terminal or ignition coil at engine.

$26.59/ea.
In Stock
Door Handle Gasket Set

p/n: 70-0925-69

This Door Handle Gasket Set is designed from the original part for superior fitment and seal. This six (6) piece gasket set will do two (2) doors.

$25.29/set
In Stock
Body mounting pad

p/n: 70-1749-48

Pad, body mounting. Fully molded rubber with metal core and locating collar. Two and five eighths inch (2 5/8") outside diameter by one and one eighth inch (1 1/8") locating collar outside diameter by one half inch (1/2") inside hole diameter. One inch (1

$25.19/ea.
In Stock
Fuel Neck Grommet

p/n: 70-1439-39

Grommet, fuel filler neck. Fully molded with retaining flange. Easy to install, just pop in. Fits as original. Three and three eighths inch (3-3/8") outside diameter by two inches (2") inside hole diameter by seven eighths inch (7/8") height.

$23.79/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$22.59/ea.
In Stock
Rocker panel dust shield cover

p/n: 70-2392-45

Cover, rocker panel inner dust shield. Fully molded with proper attaching teeth and flap.

$21.99/pr.
In Stock
Splash Apron / A-Arm Dust Shield

p/n: 70-2801-45

This two (2) piece Splash Apron / A-Arm Dust Shield Filler set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit over suspension a-arms and inside front inner fenders.

$20.99/pr.
In Stock
Exhaust system hanger

p/n: 60-0308-13

Insulator (support). Muffler/tailpipe system, strap type as original. One and three fourths (1-3/4) inch by three and five eighths (3-5/8) inch.

$15.49/ea.
In Stock
Taillight gasket

p/n: 60-0697-15

Seal, taillight bezel. Correct profile and long lasting material. Four (4) strips cut sixteen and three eighths (16-3/8) inches long.

$14.99/set
In Stock
Hood bumper

p/n: 60-0275-42

Bumper, hood side-to-fender. Stem retainer type.

$13.79/ea.
In Stock
Dimmer Switch Grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$13.39/ea.
In Stock
Gearshift bushing

p/n: 60-0237-24

Bushing, gearshift shaft lever, larger type. Three eighths (3/8) inch inside diameter by nine sixteenths (9/16) inch outside diameter barrel.Height: .

$13.19/ea.
In Stock
Masticated Rubber Sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$13.19/sqf
In Stock
Hood bumper

p/n: 50-0205-42

Bumper, adjustable type, hood front. Cadmium plated bolt (5/16)-18 x 1-1/4", rubber bumper 1-1/8" in diameter, 5/8" thick.Height: 1.875 inches.

$11.39/ea.
In Stock
Cowl Panel to Cowl Filler Seals

p/n: 70-3695-43

This Cowl Panel to Cowl Filler Gasket pair is designed from the original part for superior fitment and function. These seals go under the cowl vent grille on the left and right sides of it.

$9.69/pr.
In Stock
Window Stop Stem Bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$9.69/ea.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1112-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$8.89/ft.
In Stock
Door Weatherstrip With Clips

p/n: 70-1245-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$8.79/ft.
In Stock
Brown Door Lock Knob

p/n: 70-0660-70

This is the Knob or push button for the inside door lock. The part fits over 1/8" steel rod to door lock. Neutral brown color that may be lacquered with other colors as required. A hard rubber part fits many different vehicles.

$8.59/ea.
In Stock
2-5/8" Run Channel Mohair Liner

p/n: 70-2863-58

Run channel liner helps reline guide bars on lock side of hardtops and convertibles. Available by the foot.

$7.89/ft.
In Stock
Tie rod dust cover

p/n: 60-0096-32

Dust seal, tie rod ends. Four (4) required per vehicle.

$7.89/ea.
In Stock