Search Results
Please click on the part name in red in order to get a complete description.
Front Door Vent Window Weatherstrips
p/n: 20-0893-55
These front door vent window seals are designed from the original parts for superior fitment and seal. The pieces are molded as left and right and are one piece with the division post seal.
Windshield Gasket
p/n: 20-0890-50
This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Windshield Gasket
p/n: 20-2894-50
This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.
Body mounting pad kit
p/n: 20-0889-48
Kit, cab to frame mounting. For 2 W/D (wheel drive) only. Thirty-six (36) piece set. Comes with instruction sheet. Set includes special washers, all bolts and nuts.
Window felt and run channel
p/n: 20-0899-58
Eight (8) piece set. Set includes run channel and beltline weatherstrip with stainless steel bead.
Side window run channel kit
p/n: 20-0898-58
Kit, complete window anti-rattler. Deluxe kit for both doors. Replaces factory #C7TZ-8121460-CA. Kit includes: two (2) each of C7TZ-8121508, two (2) pair of C7TZ-8121452-53, and two (2) each of C7TZ-8121546-A. Useage: 1967-71: F100-750 serie
Radiator mounting pad kit
p/n: 20-0772-31
Pad kit, radiator support to frame. Fits 1973-76 F100 2-wheel drive, but will work for F250 through F350 but must add extra metal washers.
Rear Window Gasket
p/n: 20-0912-81
This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding.
Rear Window Gasket
p/n: 20-0911-81
This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Torsion bar bushing kit
p/n: 20-0776-32
Bushing kit, radius arm and axle pivot. 2 W/D (wheel drive). Includes two (2) eachC5TZ-3B177-A, two (2) each C5TZ-3B203-C, and two (2) each C5TZ-3B203-B.
Front Door weatherstrip
p/n: 20-0908-72
Door edge weatherstrip. This part is the primary door to body weatherstrip. Glues to the body of the truck. Adhesive is not included in the kit.
Window felt weatherstrip
p/n: 80-0644-57
Original equipment style side window horizontal seal kit (also known as beltline weatherstrip). Made with black bead. Kit includes inner and outer felt beltline weatherstrip for each door and quarter windows. These strips wipe the side windows when the gl
Window felt weatherstrip
p/n: 80-0643-57
Original equipment style side window horizontal seal kit (also known as beltline weatherstrip). Made with stainless steel bead. Kit includes inner and outer felt beltline weatherstrip for each door and quarter windows. These strips wipe the side windows w
Brake and clutch shank seal
p/n: 20-0634-24
Seal, clutch rod to floor. Used on motor side. Pre-molded with metal insert.
Axle rebound pad
p/n: 20-0647-32
Bumper, rear axle. Two (2) required per Truck. 1965-72: F100, F350 2 W/D (wheel drive), F100, F250 4 W/D (wheel drive).
Motor Mount
p/n: 20-0602-11
Rear motor mount. Useage: 1965-72: Fits F100, F250 4x2s Manual Trans. 8 cyl. 302, 352, 360, 390; F100, F250 4x2s Manual Trans. 8 cyl. 240, 300; F100, F250 all 6 cyl.
Accelerator Pedal Pad
p/n: 20-1075-40
Pedal, accelerator. Includes chrome trim. Trucks (F100-350) before Serial # P60,001.
Motor Mount
p/n: 20-0834-11
Right hand motor mount. Useage: 1967-72: F100-350 Trucks with 352, 360, or 390 V8.
Splash Apron Fender Seal
p/n: 20-0877-44
Seals, front fender apron to cab mount strip. Made of high quality EPDM rubber and to the original design for a factory like fit.
Standard bumper
p/n: 20-0907-71
Bumpers, dual useage. Used on the rear of the hood for 1966-67: Fairlane & Ranchero. Used as a liftgate bumper for 1966-77: U-Series Bronco. Use on the door for 1967-72: F100-750 Series trucks.
Hood bumper
p/n: 20-0875-42
Bumpers, hood side. 1967-69 needs 1 pr. per truck, 1970-72 needs 2 pr. per truck.
Radius Arm Bushing
p/n: 20-0671-36
Radius Arm Bushing - At Frame end of Radius Rod 4-Wheel Drive. Requires two (2) bushings per side with four (4) per vehicle.
Taillight lens gasket
p/n: 20-0837-15
Gaskets, taillight lens. Rectangular type. For style-side trucks.
Taillight lens gasket
p/n: 20-0747-15
Gaskets, taillight lens. Square type. Useage: 1967-72: F100-350 Trucks EXCEPT Style-side 1973-77: F100-250 series Flare-side pickups before Serial #020,000.
Pickup tie down mounting pad
p/n: 20-0885-45
Pad, pickup box tie down hook. Eight (8) required per truck.
Body Hole Plug
p/n: 20-0843-20
Plug, style-side bed side panel. One and five eighths (1-5/8) inch diameter. Fits 1-1/16" hole.
Body hole plug
p/n: 20-0845-20
Plug, oval floor pan front. Rubber. One half (1/2) inch by one (1) inch diameter. Two (2) each required per truck.
Body hole plug
p/n: 20-0844-20
Plug, cowl side panel inner. One and seven eighths (1-7/8) inch diameter. Two (2) each required per truck.
Brake adjustment hole plug
p/n: 70-1092-24
Plug, brake adjustment hole. Fits five sixteenths (5/16) inch by one (1) inch slot. Most models with drum brakes.Length: 1.25 inches. Height: .875 inches.
