Removable Rear Window Gasket
p/n: 70-3949-81
This Removable Rear Window Gasket is designed from the original part for superior fitment and sealing. This rear window gasket has the properly molded corners for a precise and like factory fit.
Front Suspension Rubber Bumper Set
p/n: 82-0176-32
Front Suspension Rubber Bumper Kit - A four (4) piece set with both upper and lower arm rubber bumpers in one set.
Clutch Release Lever Boot
p/n: 20-0761-24
This Clutch Release Lever Boot is designed from the original part for superior fitment and seal. This boot is for the clutch release lever to clutch housing.
Body Bumper Kit
p/n: 90-0217-90
This fourteen (14) piece Body Bumper Kit is designed from the original part for superior fitment, finish and function. Designed from originals and made from top quality rubber to ensure durability.
Vent Window Division Bar Weatherstrips
p/n: 70-3632-56
This Front Vent Window Division Bar Weatherstrip pair is designed from the original part for superior fitment and seal. This part fits opposite the glass run channel and seals the vent window when the vent is closed.
Hood to Cowl Weatherstrip
p/n: 70-1640-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. This 38-1/2” long x 11/16” wide weatherstrip provides complete coverage.
Side Window Vertical Leading Edge - Fastback
p/n: 20-2842-80
This Side Window Weatherstrip pair is the vertical piece of weatherstrip that seals between the door glass channel and the quarter window glass when the quarter window is closed. This weatherstrip will easily attach to the stainless steel channel that's connected to the door glass.
Steering Column To Floor Seal
p/n: 20-0785-36
This Steering Column To Floor Seal is designed from the original part for superior fitment and seal. Restores the cab to floor sealing against the outside elements. For Manual Steering models.
Axle Rebound Pad
p/n: 20-0647-32
Bumper, rear axle. Two (2) required per Truck. 1965-72: F100, F350 2 W/D (wheel drive), F100, F250 4 W/D (wheel drive).
Window Felt Beltline Weatherstrips - 3ft Pair
p/n: 30-0244-57
This side window Window Felt Beltline Weatherstrip pair can be used as inner and/or outer. The weatherstrip is flexible, pile lined, rubber covered, with black bead. Available in 3ft pairs.
Heat and Sound Insulator Underlayment Set
p/n: 70-4671-88
This four (4) piece die-cut Heat and Sound Insulator Underlayment Set lays under the carpet. This insulator underlayment will decrease road noise and decrease heat inside the interior compartment. Pre-cut and ready to be installed into your vehicle to improve driving comfort.
Side Window Vertical Leading Edge
p/n: 20-2843-80
This Side Window Weatherstrip pair is the vertical piece of weatherstrip that seals between the door glass channel and the quarter window glass when the quarter window is closed. This weatherstrip will easily attach to the stainless steel channel that's connected to the door glass.
Vent Window Division Post Seal
p/n: 70-3870-56
This Vent Window Division Post Seal is fully molded with metal core and attaching tabs.
Radiator Mounting Insulator Pads
p/n: 70-2238-31
A four (4) piece set of Radiator Mounting Insulator Pads. For use on all four corners of the radiator. For vehicle models with three (3) wide core radiators.
Trunk Weatherstrip
p/n: 70-1438-85
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Body Bumper Kit
p/n: 90-0211-90
This fourteen (14) piece Body Bumper Kit is designed from the original part for superior fitment, finish and function. Designed from originals and made from top quality rubber to ensure durability.
U Jamb Lock Pillar Filler
p/n: 82-0075-79
This U Jamb Lock Pillar Filler seals the bottom of the rear side window, and may also be known as a door jamb seal. Fully molded authentic rubber construction with metal core.
U Jamb Lock Pillar Filler
p/n: 82-0064-79
This U Jamb Lock Pillar Filler seals the bottom of the rear side window, and may also be known as a door jamb seal.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-0773-WT
This Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Voltage Regulator Cover Shield
p/n: 70-4531-17
This Voltage Regulator Cover Shield is designed from the original part for superior fitment and function. This cover shield is located over and above the voltage regulator.
Body to Frame Isolator Mounting Pads
p/n: 70-3343-48
This two (2) piece Body to Frame Isolator Mounting Pad set is designed from the original part for superior fitment and seal. Pieces are made of fully molded EPDM rubber. Two (2) sets required per car.
Windshield Frame Upper (Header) Weatherstrip
p/n: 70-4476-52
This Windshield Frame Upper (Header) Weatherstrip is designed from the original part for superior fitment and sealing. This windshield frame upper weatherstrips mounts to seal between the windshield frame and hardtop of the vehicle. Made of a high-quality EPDM rubber as the original.
Steering Column At Floor Seal
p/n: 20-1072-36
This Steering Column At Floor Seal is designed from the original part for superior fitment and sealing. This part fits around the steering column to seal the column at the body floor pan.
Side Window Vertical Leading Edge
p/n: 70-1556-80
This quarter to side window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Taillight Lens Gaskets
p/n: 70-3989-15
This Taillight Lens Gasket pair is designed from the original part for superior fitment and seal. These reproduction gaskets fit between taillight lens & taillight housing.
Convertible Top Decklid Weatherstrip
p/n: 70-3950-67
This Convertible Top Decklid Weatherstrip is designed from the original part for a superior fitment and seal. This rubber seal mounts around the full perimeter of the soft top storage compartment.
Suspension Bushing
p/n: 70-3345-35
Bushing, rear shackle to body insulating mounts, upper. This is a four (4) piece set. Replaces OEM # 397225
Peel-N-Stick Trunk Weatherstrip
p/n: 70-0774-WT
This Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Spring Shackle Bushing Set
p/n: 20-0867-32
This Spring Shackle Bushing Set is for one (1) front of the rear leaf spring. Designed from original parts for a precise, factory fit.
Hood to Cowl Weatherstrip
p/n: 20-0216-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original Ford part using dense rubber with pre-installed fastener clips.
Fastback Rear Window Louver Gaskets
p/n: 20-2857-83
A six (6) piece Fastback Rear Window Louver Gasket set designed from the original part for superior fitment and function. These gaskets or pads serve to protect the paint when installing the rear window louvers.
Side Window Vertical Leading Edge
p/n: 82-0019-80
This Side Window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Upper Door - Roof Rail Weatherstrips
p/n: 70-2436-73
This Upper Door - Roof Rail Weatherstrip pair is made of high-quality EPDM rubber with vulcanized corners for a factory like fit. These upper, left and right door weatherstrips seal the door window frame to the hardtop and to the windshield frame.
U Jamb Door Lock Pillar Filler
p/n: 82-0018-79
This U Jamb Lock Pillar Filler pair is designed from the original part for superior fitment, finish and function. This filler pair mounts on the body to seal the bottom of the rear side window. May also be known as a door jamb seal.
Vertical Leading Edge Weatherstrips
p/n: 83-1013-80
This Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Splash Apron / A-Arm Dust Shield Filler
p/n: 70-3690-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces fit over suspension a-arms and inside front inner fenders.
Transmission Mount
p/n: 20-0602-11
This Transmission Mount, rear engine mount, is made to original specifications for an authentic fit and appearance. Used for manual or automatic transmissions.
Torsion bar bushing
p/n: 20-0667-36
Bushing, front axle pivot. Two (2) required per Truck. Twin I Beam suspension.
Spring Shackle and Bushing Set
p/n: 20-2731-32
This Spring Shackle and Bushing Set is for the rear of the rear leaf spring. Designed from original parts for a precise, factory fit. Two (2) sets required per car.
Trunk Decklid Weatherstrip
p/n: 20-0095-84
This Trunk Decklid Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 20-0302-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The decklid weatherstrip mounts around the full perimeter of the trunk directly to the body.
Peel-N-Stick Trunk Decklid Weatherstrip
p/n: 20-2858-WT
This Peel-N-Stick Trunk Decklid Weatherstrip is designed for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk decklid to seal directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Windshield Frame to Cowl Weatherstrip
p/n: 70-3004-42
This Windshield Frame to Cowl Weatherstrip is designed from the original part for superior fitment and seal. This cowl rubber goes in between the windshield frame and cowl. This part also fits the 1952-1971 M38A1 model.
Chrome Bumper To Body Splash Shield Filler
p/n: 70-4858-47
This Chrome Bumper To Body Splash Shield Filler is designed from the original part for a superior fitment. This bumper filler is approximately fifty-eight and three-eighths (58-3/8") inches long and fits between the vehicle body and the chrome rear bumper.</p>
Push-Out Window Weatherstrip
p/n: 70-4183-76
This Push-Out Window Weatherstrip mounts around the full perimeter of the glass and will flex around the window corners. A replacement for the original part offering a precise fit.
Fastback Quarter Window Lower Pivot Covers
p/n: 20-2787-62
These Fastback Quarter Window Lower Pivot Cover are designed from the original part for superior fitment, finish and function. The cover pair installs on pivot rod at fiberglass interior panel.
Push-Out Window Weatherstrip
p/n: 70-4038-81
This Push-Out Window Weatherstrip is for the side OR rear push-out windows. This outer gasket goes around the outside perimeter of the frame and seals against the van when the window is closed.
Firewall to Hood Weatherstrip - Cowl Lacing
p/n: 20-1089-42
This Firewall To Hood Weatherstrip - Cowl Lacing is designed from the original part for superior fitment and seal. An exact reproduction using dense and sponge rubber extrusion with fasteners imbedded in place as original.
Undercarriage Cross Member Dust Shields
p/n: 70-4626-45
This Undercarriage Dust Shield pair is designed from the original part for superior fitment and appearance. Filler pieces are die cut from durable fabric reinforced rubber as original.
Splash Apron / A-Arm Dust Shield Filler Set
p/n: 70-3332-45
This five (5) piece Splash Apron / A-Arm Dust Shield Filler Set is designed from the original part for superior fitment and function. Filler pieces are die cut from quality masticated rubber to authentic original dimensions.
Hood To Cowl Weatherstrip
p/n: 82-0067-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Wiper motor mounting pad
p/n: 70-3391-21
Seal, wiper motor mounting. Attaches under the cowl on the firewall. This is for models with a three speed wiper motor.
Brake and clutch shank seal
p/n: 20-0850-23
Seal, clutch rod to floor. Rubber with metal. Useage: 1968-71: F100-350 Series before Serial #M00,001.
Window Glass Run Channels
p/n: 70-4838-58
This Window Glass Run Channel pair is designed from the original part for superior fitment and function. These glass run channels simply press into the inside rear of the door near the door lock. This pair fits both driver and passenger sides.
Trunk Weatherstrip
p/n: 82-0028-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Clutch and Brake Pedal Pads
p/n: 60-0242-22
This reproduction Clutch and Brake Pedal Pad pair slips over the full perimeter of the pedal for a precise, factory fit. A perfect reproduction to replace worn original pedal pads. Manufactured in quality black rubber.
Splash Apron / A-Arm Dust Shield Set
p/n: 70-2511-45
This four (4) piece Splash Apron / A-Arm Dust Shield Filler set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit over suspension a-arms and inside front inner fenders.
Trunk Weatherstrip
p/n: 70-0773-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Wiring Grommet Boots
p/n: 70-4712-21
This Wiring Grommet Boot pair is designed from the original part for superior fitment and function. This protective wiring grommet boot can be found below the vehicle's package tray and at the quarter window pillar.
Door Plug Beltline Extender
p/n: 70-3214-62
This Door Plug Beltline Extender pair is designed from the original part for superior fitment and seal. This piece works on beltline as an extender. Width: 2.0 inches.
Lower Sash Channel Filler, Door Glass
p/n: 20-0240-58
Channel, door window glass lower rubber. Front or rear doors. One (1) pair does two (2) windows.
Trunk Weatherstrip
p/n: 70-4508-85
This Trunk Weatherstrip mounts in the trunk area with weatherstrip adhesive. Reproduction weatherstrip is made from ozone resistant EPDM sponge rubber to OEM specifications for a precise, factory fit.
Roof To Quarter Panel Seals
p/n: 70-4012-68
This Roof To Quarter Panel Seal pair for both the left and right side, mount between the bedside quarter panel and the hardtop roof.
Rear Stone Deflector Rubber Ends
p/n: 20-0237-47
These Rear Stone Deflector Rubber Ends install between the body and rear bumper. The seals are an exact reproduction of the original rear bumper to body seals. One (1) pair needed car.
Accelerator Pedal Pad
p/n: 20-0678-40
Pedal, accelerator. Molded rubber design. Trucks (F100-200) after Serial #696,001.
Quarter Post To Window Seals - Fastback
p/n: 20-2841-79
This Quarter Post To Window Seal pair is designed from the original part for superior fitment and seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.
Accelerator Pedal Pad
p/n: 20-1075-40
This Accelerator Pedal Pad is made of top-quality EPDM rubber with a high level of fit and finish. Designed to be a direct fit reproduction.
Front Stabilizer Bar End Link Set
p/n: 70-2111-33
A twenty-two (22) piece Front Stabilizer Bar End Link set. Comes complete with fasteners, metal sleeves, metal cup washers and black rubber bushings. One (1) end link set for both sides of stabilizer bar on one (1) car.
Engine Top Cover Weatherstrip
p/n: 70-3469-88
This Engine Top Cover Gasket is an original design reproduction made from top quality sponge rubber. This gasket attaches between the removable engine cover ("doghouse") and the vehicle firewall / floorboard.
Bottom of Door Weatherstrips
p/n: 20-2833-73
This Bottom of Door Weatherstrip pair is designed from the original part for superior fitment and seal. This weatherstrip fits along the bottom of the door to close against the vehicle body. Includes attaching screws.
Inner Fender to Cowl Filler Set
p/n: 70-3356-45
This six (6) piece Inner Fender to Cowl Filler set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit at rear of fender to cowl panel.
Trunk Weatherstrip
p/n: 20-2861-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.
Rear Leaf Spring Shackle Assembly
p/n: 20-1066-32
This reproduction Rear Leaf Spring Shackle Assembly is complete with shackle bar plates, rubber bushings and lock nuts. For fitting the suspension leaf spring at its rear spring eye to the vehicle body. Two (2) assemblies required per car.
Outer Fender To Inner Fender Gaskets
p/n: 70-4797-45
This Outer Fender To Inner Fender Gasket pair is designed from the original part for superior fitment and seal. Gaskets fit at the top of the left and right front fenders. Gasket pieces are die-cut from quality masticated rubber to authentic original OEM dimensions.
Trunk Weatherstrip
p/n: 70-0774-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Ulta-Mat Quarter Panel Heat and Sound Underlayment
p/n: 70-4784-88
This Ulta-Mat Quarter Panel Heat and Sound Underlayment pair is pre-cut for a direct-fit installation. Underlayment pieces are made from a flexible and lightweight foil facing foam rubber sound and heat insulation material.
Firewall Grommet
p/n: 70-4076-20
This Firewall Grommet is for the firewall pass-through of vacuum hoses or wiring. This grommet is a direct replacement part on 1966-1970 Pontiac models with V8 and factory air conditioning only.
Body / Cowl to Fender Seals
p/n: 70-2794-43
This Body / Cowl to Fender Seals pair is designed from the original part for superior fitment and function. Filler seal pieces are die cut from quality masticated rubber to authentic original dimensions.
Splash Apron / A-Arm Dust Shield Filler
p/n: 70-3484-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces fit over suspension a-arms and inside front inner fenders.
Hood to Cowl Weatherstrip
p/n: 70-4693-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Splash Apron Fender Seal
p/n: 20-0877-44
This Splash Apron Fender Seal pair installs from the inner fender panel to the firewall. Made of high quality EPDM rubber and to the original design for a factory like fit.
Hood to Cowl Weatherstrip
p/n: 70-3924-43
This Hood to Cowl Weatherstrip has the proper rubber cross section and is made from top quality rubber to ensure durability and seal. Designed from the original part for a superior fitment and seal.
Splash Apron / A-Arm Dust Shield
p/n: 70-3058-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit over suspension a-arms and inside front inner fenders.