Front Door Vent Window Weatherstrips
p/n: 70-4312-55
This Front Door Vent Window Weatherstrip pair is designed from the original parts for superior fitment and seal. A two (2) piece pair that fits both driver (Left) and passenger (Right) front door vent / wing window assemblies.
Outer Front Header Weatherstrip
p/n: 70-4834-68
This removable hardtop Outer Front Header Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip installs on the front of the shell with weatherstrip adhesive glue (not included) and presses against the cab weatherstrip. This single piece is for the double wall hardtop models.
Rear Window Gasket
p/n: 20-0912-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Windshield Gasket
p/n: 70-2452-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.
Windshield Gasket
p/n: 70-2467-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Ulta-Mat Headliner Heat and Sound Underlayment
p/n: 70-4783-88
This Ulta-Mat Headliner Heat and Sound Underlayment pair is pre-cut for a direct-fit installation. Underlayment pieces are made from a flexible and lightweight foil facing foam rubber sound and heat insulation material.
Front Door Vent Window Weatherstrips
p/n: 70-4475-55
This Front Door Vent Window Weatherstrip pair is designed from the original part for superior fitment and seal. A two (2) piece pair that fits both driver (Left) and passenger (Right) front doors of the vent / wing window assemblies.
Tailgate Weatherstrip
p/n: 70-3009-84
This Tailgate Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts to the sides and bottom of the tailgate with properly spaced plastic clips. Includes molded ends.
Heater Air Inlet Hose Connector
p/n: 70-4739-88
This black rubber accordion style flexible Heater Air Inlet Hose Connector is designed from the original part for superior fitment and seal. This part works to seal the passenger side of the cowl to direct fresh air to the heater box.
Window Felt Beltline Weatherstrips - Black Bead
p/n: 80-0060-57
This is a high-quality Window Felt Beltline side window horizontal weatherstrip set (also known as beltline weatherstrip). This black bead style four (4) piece set includes inner and outer window felt beltline weatherstrips for each door side window.
Vent division bar weatherstrip
p/n: 70-2135-56
Front vent window division post seal. Fully molded with metal core.
Rear Window Gasket
p/n: 20-2850-81
This Rear Window Gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. Fitted gasket provides a formed, seamless seal.
U Jamb Lock Pillar Filler
p/n: 20-1196-79
This U Jamb Lock Pillar Filler pair seals the bottom of the rear side window and may also be known as a door jamb seal.
Vent Window Division Post Run Channel
p/n: 70-4126-58
This Vent Window Division Post Run Channel is flock lined with a molded-in upper bumper. Sold as a pair and each part is marked L (Left) and R (Right) for proper orientation on installation.
Clutch Lever Dust Boot
p/n: 20-2712-24
This Clutch Lever Dust Boot covers the opening on your engine bellhousing for manual transmission models. Made from Original Ford tooling.
Quarter and Side Window Leading Edge
p/n: 20-0295-80
This Quarter and Side Window Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. A reproduction manufactured to OEM specifications to install for an authentic appearance.
Quarter Window Vertical Leading Edge
p/n: 70-4763-80
This Quarter Window Vertical Leading Edge pair is the vertical piece of weatherstrip that seals between the door glass and the rear quarter window glass when the quarter window is raised and closed.
Rear Liftgate Window Gasket with Trim Groove
p/n: 70-4004-83
This Rear Liftgate Window Gasket with Trim Groove fits the rear liftgate window of the removable Bronco hardtop. It's made from ozone resistant EPDM rubber and to the same specifications as the original for an authentic factory fit and finish.
Rear Window Gasket
p/n: 70-1721-81
This Rear Window Gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Rear Window Gasket
p/n: 70-1720-81
This Rear Window Gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. Fitted gasket provides a formed, seamless seal.
Window Felt Beltline Weatherstrips
p/n: 80-0567-57
This is an Original equipment style side window horizontal weatherstrip set (also known as beltline weatherstrip). This four (4) piece set includes inner and outer window felt beltline weatherstrips for each front door window.
Side Window Glass Run Channels
p/n: 70-4206-58
This Side Window Glass Run Channel pair is designed from the original part for superior fitment and function. These two (2) pieces of flexible window run channel are for the sides and top of door windows.
Splash Apron
p/n: 20-0880-44
This two (2) piece Splash Apron is designed from the original part for superior fitment and seal. Installs between the front fender and front body pillar.
U Jamb Lock Pillar Filler
p/n: 70-3386-79
Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.
Radius Arm & Axle Pivot Bushing Set
p/n: 20-0776-32
This Radius Arm and Axle Pivot Bushing Set is a quality reproduction of the original factory part(s). This six (6) piece strut rod bushing set includes two (2) each C5TZ-3B177-A, two (2) each C5TZ-3B203-C, and two (2) each C5TZ-3B203-B top quality bushings. Fits two-wheel (2WD) drive trucks.
Radius Arm Bushing Set
p/n: 20-0673-36
This Radius Arm Bushing Set is a quality reproduction of the original factory part(s). This eight (8) piece set includes: Four (4) each D6TZ-3B203-A Front Axle Bushings and Four (4) each C5TZ-3B203-C Frame End Bushings. Fits four-wheel (4WD) drive trucks.
Side Window Vertical Leading Edge
p/n: 70-0786-80
This quarter to side window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Gearshift Boot
p/n: 70-4817-26
This Gearshift Boot is designed from the original part for superior fitment and function. This boot fits over the gearshift tower to make a weathertight connection for the transmission gearshift rod as it passes up through the vehicle floorboard.
Liftgate Weatherstrip
p/n: 70-3008-84
This Liftgate - Upper Tailgate Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the liftgate with properly spaced plastic clips.
1935-1974 Cadillac Factory Parts Manual, CD
p/n: 07-1346-07
This GM Licensed Detroit Iron CD provides the most comprehensive set of digital Cadillac Factory parts manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
1969-1970 Dodge Truck Factory Shop Manual, CD
p/n: 07-1176-07
This MOPAR-Licensed Detroit Iron CD contains the most comprehensive set of digital OEM shop manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
1970 Ford Truck And Van Factory Shop Manual, CD
p/n: 07-1249-07
This FORD-Licensed Detroit Iron CD contains the most comprehensive set of digital OEM shop manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
1970 Lincoln-Mercury Factory Shop Manual, CD
p/n: 07-1283-07
This Lincoln-Mercury FORD-Licensed Detroit Iron CD contains the most comprehensive set of digital OEM shop manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
Door End Cap Fillers
p/n: 82-0208-73
This Door End Cap Filler pair is designed from the original part for superior fitment and sealing. Fully molded with metal core just like original.
Side window leading edge
p/n: 60-0662-80
Side window vertical leading edge weatherstrip. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised. Molded authentic rubber construction with metal core, this part does not include the chrome piece
Door Weatherstrip End Cap
p/n: 82-0183-73
Weatherstrip, door seal end cap or filler. Fully molded. Order #82-0184-72 for perimeter weatherstrip separately.Width: 3.75 inches.
Automatic Transmission Mount
p/n: 70-1007-11
This Automatic Transmission Mount is designed from the original part for a correct fitment. Mounts rear at the transmission. This mount supports the transmission and dampens vibration.
Window Felt Beltline Weatherstrips
p/n: 81-0029-57
This is a high quality Window Felt Beltine side window horizontal weatherstrip set (also known as beltline weatherstrip). This four (4) piece set includes inner and outer window felt beltline weatherstrips for each door / side window.
Fuel Filler Neck Grommet
p/n: 70-2581-39
This Fuel Filler Neck Grommet is designed from the original part for superior fitment and seal. This grommet fits around the vehicles fuel filler neck between the filler neck and vehicle body.
1968-1975 Pontiac Factory Parts Manual, CD
p/n: 07-1414-07
This GM Licensed Detroit Iron CD provides the most comprehensive set of digital Pontiac Factory parts manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
Beltline Weatherstrip
p/n: 70-1120-61
This Beltline Weatherstrip comes in a six (6) foot length for the outer beltline (sometimes called "scraper seal"). For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Available in 6ft lengths.
Rear Liftgate Window Gasket without Groove
p/n: 70-4003-83
This Rear Liftgate Window Gasket without Trim Groove fits the rear liftgate window of the Bronco's Removable Hardtop. It's made from ozone resistant EPDM rubber and to the same specifications as the original for an authentic factory fit and finish.
Rear Window Gasket with Trim Groove
p/n: 70-4002-81
This Rear Window Gasket with Trim Groove fits the Bronco Half Cab - Pickup models only. The gasket mounts around the full perimeter of the back glass and has properly molded corners. This gasket has the trim groove slot to accommodate the outer edge's decorative molding.
Rear Window Gasket without Trim Groove
p/n: 70-4001-81
This Rear Window Gasket without Trim Groove fits the Bronco Half Cab / Pickup models only. The gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit.
Trunk Weatherstrip
p/n: 20-2867-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Window Felt Inner Beltline Weatherstrips
p/n: 80-0417-57
This is a high-quality material Window Felt Inner Beltline side window horizontal weatherstrip set (also known as beltline weatherstrip). This two (2) set includes only the inner seals (the part sealing the interior of the car) for the door side windows.
Body Plug - Rubber Grommet Set
p/n: 20-2705-20
This fourty-four (44) piece Body Plug and Grommet set is designed from the original parts for superior fitment and sealing. Mustang Club of America (MCA) approved.
Fuel Filler Pipe To Trunk Floor Seal
p/n: 20-2739-41
This Fuel Filler Pipe To Trunk Floor Seal is designed from the original part for superior fitment and seal. This part fits around the vehicles fuel filler pipe between the filler pipe and the trunk floor.
Taillight Housing to Body Gasket
p/n: 20-2665-15
This Taillight to Body Gasket is designed from the original part for superior fitment and sealing. These reproduction gaskets fit between taillight frame housing and the body. Thick mount type.
Hood to Cowl Weatherstrip
p/n: 70-2389-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts at the rear of the engine bay directly to the body. Proper rubber cross section with pre-inserted attaching clips.
Liftgate to Tailgate Weatherstrip
p/n: 70-4158-85
This Liftgate to Tailgate Weatherstrip reproduction is designed from the original part for superior fitment and seal. This liftgate seal mounts to the liftgate with screws (not included).
Peel-N-Stick Trunk Weatherstrip
p/n: 70-3050-WT
This Peel-N-Stick Trunk Weatherstrip is designed for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk decklid to seal directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-1438-WT
This Peel-N-Stick Trunk Weatherstrip is designed for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk decklid to seal directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
U Jamb lock pillar filler
p/n: 82-0053-79
Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.
Window Locking Strip - Chrome
p/n: 70-2196-52
This Chrome Locking Strip is used to retain windshield gaskets in pickups and vans. Designed from the original part for superior fitment, finish and function. Available in 16ft. lengths.
Beltline Weatherstrip Channel
p/n: 70-0651-58
This Beltline Weatherstrip Channel is a five (5) foot length of rigid channel with a flocked rubber lip and a flat stainless bead. Can be used as the inner beltline weatherstrip on front doors, rear doors and quarter windows.
Body Bumper Kit
p/n: 90-0200-90
This sixteen (16) piece Body Bumper Kit is designed from the original part for superior fitment, finish and function. Designed from originals and made from top quality rubber to ensure durability.
Beltline Weatherstrip
p/n: 70-0749-60
This Beltline Weatherstrip is sold as a three (3) foot pair. Rigid, flocked rubber lip, with flat stainless bead. Available in 3ft pair.
Fuel Neck Grommet
p/n: 70-2203-39
Grommet, fuel filler neck. Fully molded with all original details. Three and one eighths inch (3-1/8") outside diameter by one and seven eighths (1-7/8") inside hole diameter by three fourths inch (3/4") inch height.
Side Window Vertical Leading Edge Weatherstrips
p/n: 50-0344-80
This Side Window Vertical Leading Edge Weatherstrips pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
U Jamb lock pillar filler
p/n: 82-0195-79
Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.
Front Lower Control Arm Bumper
p/n: 20-0202-32
This Front Lower Control Arm Bumper is designed from the original part for superior fitment, finish, and function. This suspension bumper mounts to the front lower control arm to prevent metal to metal contact.
Hood Bumper Set
p/n: 20-0212-42
This eight (8) piece Hood Bumper set is designed from the original parts for superior fitment and function.
Leaf Spring to Shackle Bushings
p/n: 70-3344-35
This Leaf Spring To Shackle Bushing set is designed from the original part for superior fitment and function. This bushing installs into the leaf spring eye to fit between the rear shackle to leaf spring. This is a four (4) piece set for both rear leaf springs.
Rear Window Gasket
p/n: 20-2851-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends.
Rear Cargo Door Hinge Gaskets Set
p/n: 60-0659-69
This four (4) piece molded Rear Cargo Door Hinge Gasket Set is made to original specifications for proper fitment. Seals are fully molded from top quality rubber to ensure durability, fitment and proper seal.
Clutch Release Lever Boot
p/n: 20-0761-24
This Clutch Release Lever Boot is designed from the original part for superior fitment and seal. This boot is for the clutch release lever to clutch housing.
Front Suspension Rubber Bumper Set
p/n: 82-0176-32
Front Suspension Rubber Bumper Kit - A four (4) piece set with both upper and lower arm rubber bumpers in one set.
Removable Rear Window Gasket
p/n: 70-3949-81
This Removable Rear Window Gasket is designed from the original part for superior fitment and sealing. This rear window gasket has the properly molded corners for a precise and like factory fit.
Body Bumper Kit
p/n: 90-0217-90
This fourteen (14) piece Body Bumper Kit is designed from the original part for superior fitment, finish and function. Designed from originals and made from top quality rubber to ensure durability.
Vent Window Division Bar Weatherstrips
p/n: 70-3632-56
This Front Vent Window Division Bar Weatherstrip pair is designed from the original part for superior fitment and seal. This part fits opposite the glass run channel and seals the vent window when the vent is closed.
Hood to Cowl Weatherstrip
p/n: 70-1640-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. This 38-1/2” long x 11/16” wide weatherstrip provides complete coverage.
Axle Rebound Pad
p/n: 20-0647-32
Bumper, rear axle. Two (2) required per Truck. 1965-72: F100, F350 2 W/D (wheel drive), F100, F250 4 W/D (wheel drive).
Side Window Vertical Leading Edge - Fastback
p/n: 20-2842-80
This Side Window Weatherstrip pair is the vertical piece of weatherstrip that seals between the door glass channel and the quarter window glass when the quarter window is closed. This weatherstrip will easily attach to the stainless steel channel that's connected to the door glass.
Steering Column To Floor Seal
p/n: 20-0785-36
This Steering Column To Floor Seal is designed from the original part for superior fitment and seal. Restores the cab to floor sealing against the outside elements. For Manual Steering models.
Heat and Sound Insulator Underlayment Set
p/n: 70-4672-88
This four (4) piece die-cut Heat and Sound Insulator Underlayment Set lays under the carpet. This underlayment will decrease road noise and decrease heat inside the interior compartment. Pre-cut and ready to be installed into your vehicle to improve driving comfort.
Heat and Sound Insulator Underlayment Set
p/n: 70-4671-88
This four (4) piece die-cut Heat and Sound Insulator Underlayment Set lays under the carpet. This insulator underlayment will decrease road noise and decrease heat inside the interior compartment. Pre-cut and ready to be installed into your vehicle to improve driving comfort.
Window Felt Beltline Weatherstrips - 3ft Pair
p/n: 30-0244-57
This side window Window Felt Beltline Weatherstrip pair can be used as inner and/or outer. The weatherstrip is flexible, pile lined, rubber covered, with black bead. Available in 3ft pairs.
Vent Window Division Post Seal
p/n: 70-3870-56
This Vent Window Division Post Seal is fully molded with metal core and attaching tabs.
Radiator Mounting Insulator Pads
p/n: 70-2238-31
A four (4) piece set of Radiator Mounting Insulator Pads. For use on all four corners of the radiator. For vehicle models with three (3) wide core radiators.
Trunk Weatherstrip
p/n: 70-1438-85
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 70-3050-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Body Bumper Kit
p/n: 90-0211-90
This fourteen (14) piece Body Bumper Kit is designed from the original part for superior fitment, finish and function. Designed from originals and made from top quality rubber to ensure durability.
Hood to Cowl Weatherstrip
p/n: 70-3146-42
This three (3) piece Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip set installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
U Jamb Lock Pillar Filler
p/n: 82-0075-79
This U Jamb Lock Pillar Filler seals the bottom of the rear side window, and may also be known as a door jamb seal. Fully molded authentic rubber construction with metal core.
U Jamb Lock Pillar Filler
p/n: 82-0064-79
This U Jamb Lock Pillar Filler seals the bottom of the rear side window, and may also be known as a door jamb seal.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-0773-WT
This Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Voltage Regulator Cover Shield
p/n: 70-4531-17
This Voltage Regulator Cover Shield is designed from the original part for superior fitment and function. This cover shield is located over and above the voltage regulator.
Body to Frame Isolator Mounting Pads
p/n: 70-3343-48
This two (2) piece Body to Frame Isolator Mounting Pad set is designed from the original part for superior fitment and seal. Pieces are made of fully molded EPDM rubber. Two (2) sets required per car.
Windshield Frame Upper (Header) Weatherstrip
p/n: 70-4476-52
This Windshield Frame Upper (Header) Weatherstrip is designed from the original part for superior fitment and sealing. This windshield frame upper weatherstrips mounts to seal between the windshield frame and hardtop of the vehicle. Made of a high-quality EPDM rubber as the original.
Hood to Cowl Weatherstrip
p/n: 20-1090-42
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction seal with installation fastener clips included.