Body Weatherstrip Kit
p/n: 90-3242-90
This kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.
Body Weatherstrip Kit
p/n: 90-1037-90
This ten (10) piece Body Weatherstrip Kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.
Body Weatherstrip Kit
p/n: 90-2140-90
This kit includes the major weatherstrip components needed for the body of your restoration project.
Body Weatherstrip Kit
p/n: 82-0005-90
This eight (8) piece Body Weatherstrip Kit includes the major weatherstrip components needed for the body of your classic restoration vehicle. We’ve put everything together in one simple and convenient kit.
Bottom of Door Weatherstrips
p/n: 20-2833-73
This Bottom of Door Weatherstrip pair is designed from the original part for superior fitment and seal. This weatherstrip fits along the bottom of the door to close against the vehicle body. Includes attaching screws.
Brake Adjustment Hole Cover Plug
p/n: 70-1092-24
A quality molded rubber Brake Adjustment Hole Cover Plug that inserts into brake adjustment hole in the backing plate. Most models with drum brakes. Length: 1.25 inches. Height: .875 inches.
Brake and Clutch Pedal Pads
p/n: 70-3003-22
This reproduction Clutch and Brake Pedal Pad pair slips over the full perimeter of the brake pedal for a precise, factory fit. A square style direct fit reproduction to replace worn original pedal pads. Manufactured in black rubber.
Brake and clutch shank seal
p/n: 20-0850-23
Seal, clutch rod to floor. Rubber with metal. Useage: 1968-71: F100-350 Series before Serial #M00,001.
Brake or Clutch Pedal Pad - Manual
p/n: 60-0709-22
A top-quality rubber Clutch or Brake Pedal Pedal Pad reproduction. One (1) each slip-over type pedal pad installs over the full perimeter of the brake or clutch pedal for a precise, factory fit. For manual transmission model GM vehicles only.
Brake Pedal Pad
p/n: 20-1044-22
Pad, brake pedal. Models with automatic transmission and manual brakes.
Brake Pedal Pad
p/n: 20-1043-22
This reproduction Brake Pedal Pad slips over the full perimeter of the brake pedal for a precise, factory fit. Replaces original brake pedal pad for models with manual transmission and manual drum (not disc) brakes.
Brake Pedal Pad - Automatic
p/n: 60-0710-22
This reproduction Brake Pedal Pad slips over the full perimeter of the brake pedal for a precise, factory fit. A direct fit to replace worn, heavy wear original brake pedal pads. For GM models with an automatic transmission.
Brake Pedal Pad - Manual w/Disc Brakes
p/n: 70-4803-22
This reproduction Brake Pedal Pad slips over the full perimeter of the brake pedal for a precise, factory fit. A direct fit to replace worn, heavy wear original brake pedal pads. For models with manual transmission and disc brakes.
Bronco Script Brake OR Clutch Pedal Pad
p/n: 70-4480-22
This reproduction Brake OR Clutch Pedal Pad slips over the full perimeter of the brake or clutch pedals for a precise, factory fit. Replaces original brake or manual transmission clutch pedal pads.
Cab To Frame Mounting Pad Set
p/n: 20-0889-48
This thirty-six (36) piece Cab to Frame Mounting Pad set is designed from the original parts for superior fitment and function. This set is for 2 Wheel Drive trucks ONLY.
Cargo Door weatherstrip
p/n: 70-1927-72
Weatherstrip, rear cargo doors, Fully molded reproduction of original seals.
Chrome Bumper To Body Splash Shield Filler
p/n: 70-4858-47
This Chrome Bumper To Body Splash Shield Filler is designed from the original part for a superior fitment. This bumper filler is approximately fifty-eight and three-eighths (58-3/8") inches long and fits between the vehicle body and the chrome rear bumper.</p>
Clutch and Brake Pedal Bump Stops
p/n: 70-4805-24
This Clutch and Brake Pedal Bump Stop pair is designed from the original part for superior fitment, finish and function. These rubber bumpers help align your brake and clutch pedals in the correct position, while also preventing rattles and squeaks.
Clutch and Brake Pedal Pads
p/n: 60-0242-22
This reproduction Clutch and Brake Pedal Pad pair slips over the full perimeter of the pedal for a precise, factory fit. A perfect reproduction to replace worn original pedal pads. Manufactured in quality black rubber.
Clutch Lever Dust Boot
p/n: 70-4760-24
This Clutch Lever Dust Boot covers the opening on your engine bellhousing for manual transmission models. A reproduction manufactured to OEM specifications to install for an authentic fit, finish and function.
Clutch Lever Dust Boot
p/n: 20-2712-24
This Clutch Lever Dust Boot covers the opening on your engine bellhousing for manual transmission models. Made from Original Ford tooling.
Clutch or Brake Pedal Bumper
p/n: 20-1051-24
This Clutch or Brake Pedal Bumper is designed from the original part for superior fitment, finish and function. This bumper is commonly used as a clutch or brake pedal arm stop cushion.
Clutch or Brake Pedal Pad
p/n: 60-0467-22
This reproduction Clutch or Brake Pedal Pad pair slips over the full perimeter of the pedal for a precise, factory fit. A perfect reproduction to replace worn original pedal pads. Manufactured in quality black rubber.
Clutch or Brake Pedal Pad
p/n: 60-0712-22
This reproduction Clutch or Brake Pedal Pad pair slips over the full perimeter of the pedal for a precise, factory fit. A perfect reproduction to replace worn original pedal pads. Manufactured in quality black rubber.
Clutch or Brake Pedal Pad
p/n: 20-0848-22
This reproduction Clutch and/or Brake Pedal Pad slips over the full perimeter of the pedal for a precise, factory fit. A perfect reproduction to replace worn original pedal pads. Manufactured in quality black rubber.
Clutch Pedal Rod Boot
p/n: 20-1049-23
This Clutch Pedal Rod Boot is designed from the original part for superior fitment and seal. Accordion style boot seals the clutch rod to the floor.
Clutch Release Lever Boot
p/n: 20-0761-24
This Clutch Release Lever Boot is designed from the original part for superior fitment and seal. This boot is for the clutch release lever to clutch housing.
Convertible A Pillar Post Weatherstrip
p/n: 82-0069-63
Convertible A Pillar Post Weatherstrip - Attaches to the body and seals between the A-pillar post and the front section of the door or vent window frame when the door is closed.
Convertible A-Pillar Post Weatherstrip, Left Hand
p/n: 20-2790-63
This Convertible A-Pillar Post Weatherstrip is designed from the original part for superior fitment and seal. This is the left-hand side weatherstrip for the convertible windshield pillar post. Includes attaching screws.
Convertible A-Pillar Post Weatherstrip, Right Hand
p/n: 20-2789-63
This Convertible A-Pillar Post Weatherstrip is designed from the original part for superior fitment and seal. This is the right-hand side weatherstrip for the convertible windshield pillar post. Includes attaching screws.
Convertible A-Pillar Post Weatherstrips
p/n: 70-4336-63
This Convertible A-Pillar Post Weatherstrip pair is designed from the original part for superior fitment and sealing. These windshield post weatherstrips attach to the body to seal between the A-pillar post and the front section of the door or vent window frame when the door is closed.
Convertible A-Pillar Post Weatherstrips
p/n: 20-0249-63
This Convertible A-Pillar Post Weatherstrip pair is designed from the original part for superior fitment and sealing. These windshield post to door weatherstrips attach to the body to seal between the A-pillar post and the front section of the door or vent window frame when the door is closed.
Convertible A-Pillar Weatherstrips
p/n: 70-1508-63
This Convertible Hinge Pillar Post Weatherstrip pair attaches to the body and seals between the A-pillar post and the front section of the door or vent window frame when the door is closed. Replaces factory #2901040 and #2901041.
Convertible Roof Rail Weatherstrip Set
p/n: 70-1645-65
This Convertible Roof Rail Weatherstrip Set fits on the folding roof of the vehicle and seals the side window when the window is fully raised. Includes front bow.
Convertible Roof Rail Weatherstrip Set
p/n: 82-0071-65
This Convertible Roof Rail Weatherstrip set fits on the folding roof of the vehicle and seals the side window when the window is fully raised. The set includes all driver and passenger side top rail seals along with the windshield top header seal.
Convertible Roof Rail Weatherstrip Set
p/n: 70-0833-65
This Convertible Roof Rail Weatherstrip Set fits on the folding roof of the vehicle and seals the side window when the window is fully raised.
Convertible Roof Rail Weatherstrip Set
p/n: 20-2802-65
This Convertible Roof Rail Weatherstrip fits on the folding roof of the vehicle and seals the side window when the window is fully raised.
Convertible Roof Rail Weatherstrip Set
p/n: 70-4701-65
This five (5) piece reproduction Convertible Roof Rail Weatherstrip Set is designed from the original part. These high-quality rubber weatherstrips fit on the roof of the vehicle and work to seal the side windows when the window is fully raised. Set includes the front header bow weatherstrip.
Convertible Roof Rail Weatherstrip Set
p/n: 70-1685-65
This seven (7) piece Convertible Roof Rail Weatherstrip Set fits on the folding roof of the vehicle and seals the side window when the window is fully raised. Fully molded with top quality EPDM rubber and corrosion resistant brass metal cores.
Convertible Roof Rail Weatherstrip Set
p/n: 70-4338-65
This eight (8) piece reproduction Convertible Roof Rail Weatherstrip Set is designed from the original part. These high-quality rubber weatherstrips fit on the roof of the vehicle and work to seal the side windows when the window is fully raised. Set includes both front header bow weatherstrips.
Convertible Roof Rail Weatherstrip Set
p/n: 70-1420-65
This Convertible Roof Rail Weatherstrip fits on the folding roof of the vehicle and seals the side window when the window is fully raised.
Convertible Roof Rail Weatherstrip Set
p/n: 70-3946-65
This comprehensive ten (10) piece Convertible Roof Rail Weatherstrip Set includes the major weatherstrip components needed for your convertible soft top.
Convertible Top Decklid Weatherstrip
p/n: 70-3950-67
This Convertible Top Decklid Weatherstrip is designed from the original part for a superior fitment and seal. This rubber seal mounts around the full perimeter of the soft top storage compartment.
Cornering Light Lens Gaskets
p/n: 70-3100-17
This Cornering Light Lens Gasket pair is designed from the original part for superior fitment and seal. These quality reproduction gaskets fit between the cornering light lens and the cornering light housing or bezel.
Cowl to Fender Seals
p/n: 70-3340-43
This two (2) piece Cowl to Fender Seal pair is designed from the original part for superior fitment and seal. Fender seals are die cut from quality masticated rubber to authentic original dimensions.
Cowl Top Plug
p/n: 20-1813-20
This Cowl Top Plug is designed from the original part for an authentic fit, finish, and appearance. This plug installs in the access hole in cowl top.
Dimmer Switch Grommet
p/n: 40-0083-88
This Dimmer Switch Grommet is used during carpet installations in automotive restorations. Made from high-quality EPDM dense rubber to provide excellent durability. Includes a wide flange for floor dimmer switch fitments.
Door Bumper
p/n: 20-0067-71
This Door Bumper is designed from the original part for an authentic fit, finish and function. Installs on back edge of door. Usually two (2) to eight (8) per vehicle.
Door Bumper
p/n: 70-2045-71
This Door to Body Bumper is quality reproduction of the original factory part. Use varies depending upon model and body type. Some models uses four (4) bumpers for front doors and four (4) for rear doors.
Door Bumper
p/n: 33-0503-71
This fully molded 3/4” Door Bumper is quality reproduction of the original factory part. Not a generic substitute but manufactured just like the factory original.
Door Bumper
p/n: 33-0981-71
This Door Bumper is designed from the original part for superior fitment, finish and function. Molded with push in carrot retainers, this bumper is commonly used as a upper door bumper on GM models.
Door Bumper
p/n: 33-1227-71
This Door Bumper is fully molded and designed from the original part for superior fitment. The twin retainer style rubber bumper attaches to the vehicle body to support/cushion the door closure. Usually requires two (2) bumpers each per vehicle.
Door Bumper - Lower
p/n: 70-3308-71
This Lower Door Bumper is designed from the original part for superior fitment and function. Bumper pushes into slot on door at bottom.
Door Bumper, Upper / Lower
p/n: 20-2825-71
This Door Bumper is a quality reproduction of the original factory part. Upper / Lower push-in type. Four (4) required per car.
Door drain hole seal
p/n: 70-3034-70
Seal, door inner panel drain. Attaches to bottom of door with one (1) carrot retainer on either end.
Door End Cap Fillers
p/n: 82-0208-73
This Door End Cap Filler pair is designed from the original part for superior fitment and sealing. Fully molded with metal core just like original.
Door Glass Flexible Run Channel
p/n: 20-0894-58
This Door Glass Flexible Run Channel is designed from the original part for superior fitment, finish and function. This felt lined door glass run inserts into the top and backside of the door. Allows door glass to roll up and down freely.
Door Glass Run Channel
p/n: 70-4313-58
This Door Glass Run Channel is designed from the original part for superior fitment and seal. The window glass run channel presses into the door channel at the top and back part of the door. This single piece fits either the driver (LH) OR the passenger (RH) side front door.
Door Handle Gasket Set
p/n: 70-0733-69
This Door Handle Gasket Set is designed from the original part for superior fitment and seal. This six (6) piece gasket set will do two (2) doors.
Door Handle Gasket Set
p/n: 60-0640-69
This Door Handle Gasket Set is designed from the original part for superior fitment and seal. This six (6) piece gasket set will do two (2) doors.
Door Handle Gasket Set
p/n: 70-3321-69
This Door Handle Gasket Set is designed from the original part for superior fitment and seal. This four (4) piece gasket set will do two (2) doors.
Door Hinge Seal Set
p/n: 20-0909-73
This four (4) piece Door Hinge Seal set is designed from the original part for superior fitment and seal. This Door hinge to door seal set is for both doors.
Door or Tailgate Bumper
p/n: 33-1228-71
This Door Bumper is fully molded and designed from the original part for superior fitment. This rubber bumper attaches to the vehicle body to support / cushion the door closure. Usually requires two (2) bumpers each per vehicle.
Door Plug
p/n: 70-4537-45
This Door Plug is designed from the original part for superior fitment and function. Plug is made from high-quality EPDM 60 durometer dense rubber to provide excellent durability and service.
Door Plug Beltline Extender
p/n: 70-3214-62
This Door Plug Beltline Extender pair is designed from the original part for superior fitment and seal. This piece works on beltline as an extender. Width: 2.0 inches.
Door Plugs and Kick Panel Covers Set
p/n: 90-3502-90
This ten (10) piece Door Plugs and Kick Panel Covers Set is designed from the original part for superior fitment and function. Plugs and Covers are both fully molded and made from high-quality EPDM dense rubber to provide excellent durability and service.
Door to Body Conduit, Power Window Wiring
p/n: 70-1538-70
This Door to Body Conduit set is designed from the original part for superior fitment and function. This is the sheathing conduit for the power windows wiring from the front door to the body through the hinge pillar.
Door Vent Window Weatherstrips
p/n: 70-4697-55
This Front Door Vent Window Weatherstrip pair is designed from the original parts for superior fitment and seal. A two (2) piece pair that fits both driver (Left) and passenger (Right) front doors of the vent / wing window assemblies.
Door Weatherstrip
p/n: 70-1683-72
Door edge weatherstrip. This part is the primary door to body weatherstrip. Note: order #70-1684-73 end cap fillers separately.
Door Weatherstrip
p/n: 20-2832-72
This Door Weatherstrip pair is designed from the original parts for superior fitment and seal. These primary door weatherstrips have molded ends with metal cores and tabs to seal the driver and passenger doors when closed.
Door Weatherstrip End Cap
p/n: 70-1684-73
Seal or End cap, door weatherstrip end. Fully molded with original type metal core. See our #70-1683-72 for main weatherstrip.Width: 4.25 inches.
Door Weatherstrip End Cap
p/n: 82-0183-73
Weatherstrip, door seal end cap or filler. Fully molded. Order #82-0184-72 for perimeter weatherstrip separately.Width: 3.75 inches.
Door Weatherstrip End Caps
p/n: 70-3149-73
End cap, front door weatherstrip cover. Fully molded with with metal core just like the original. Width: 4.0 inches.
Door Weatherstrips
p/n: 70-4507-72
This Door Weatherstrip pair is designed from the original parts for superior fitment and sealing. Parts are made from the OEM specifications to install and fit for an authentic appearance. This seal presses into the channel on the door. Adhesive can be used for a more secure fit.
Door Weatherstrips
p/n: 20-2828-72
This Door Weatherstrip pair is designed from the original parts for superior fitment and seal to keep the elements out and reduce road noise while driving. Molded ends with metal cores.
Door Weatherstrips
p/n: 82-0118-72
This Door Weatherstrip pair is designed from the original part for superior fitment and seal. This part is the primary door to body weatherstrip. Push-on pin type door weatherstrips mount directly to vehicle doors to seal against the body when closed.
Door Weatherstrips
p/n: 82-0008-72
This Door Weatherstrip is pair from the original part for superior fitment and seal. This seal mounts around the front, bottom, and rear of the door using pre-installed clips.
Door Weatherstrips
p/n: 82-0164-72
This Door Weatherstrip pair is designed from the original parts for superior fitment and seal. These primary door seals come with molded ends and attaching clips.
Door Weatherstrips - Convertible
p/n: 70-3942-72
This Door Weatherstrip is the primary door to body weatherstrip. Designed off original parts, the pair come with proper molded ends for a like factory fit.
Door Weatherstrips - Push-On Style
p/n: 70-4837-72
This Door Weatherstrip pair is designed from the original part for superior fitment and seal. Push-on type (no adhesive required) door weatherstrips mount on the pinchweld of the body and fits to the driver side and passenger side door opening.
Drip Deflectors
p/n: 70-4836-62
These Drip Deflectors are manufactured to OEM specifications to install for an authentic fit, finish and function. The drip deflectors are attached to the body by the top of the vent assembly and used to deflect water. Sold as a pair.
Engine Mount Service - Revulcanization Only
p/n: 70-1726-11
This Revulcanization Service Only is designed to restore your original engine mounts to a like new condition. This revulcanization service is NOT for interlocking type engine mounts. Service requires your metal cores. Please call or email for more service details and ordering.
Engine Mount Service – Revulcanization Only
p/n: 70-0974-11
This Revulcanization Service Only is designed to restore your Rear Engine Support Mount to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.
Engine Mount Service – Revulcanization Only
p/n: 70-0887-11
This Revulcanization Service Only is designed to restore your Front Engine Support Mount to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.
Engine Top Cover Weatherstrip
p/n: 70-3531-88
This Engine Top Cover Weatherstrip is an original design reproduction made from top quality sponge rubber. This gasket attaches between the removable engine cover ("doghouse") and the vehicle firewall/floorboard.
Engine Top Cover Weatherstrip
p/n: 70-3469-88
This Engine Top Cover Gasket is an original design reproduction made from top quality sponge rubber. This gasket attaches between the removable engine cover ("doghouse") and the vehicle firewall / floorboard.
F-100 Brake OR Clutch Pedal Pad
p/n: 70-4484-22
This reproduction F-100 script Brake OR Clutch Pedal Pad slips over the full perimeter of the brake or clutch pedal for a precise, factory fit. Replaces original brake or manual transmission clutch pedal pads.
Fastback Fold Down Rear Seat To Floor Stop Bumpers
p/n: 20-2884-88
This Fastback Fold Down Rear Seat To Floor Stop Bumper pair is designed from the original part for superior fitment, finish and function. Includes jamb nuts.
Fastback Quarter Window Lower Pivot Covers
p/n: 20-2787-62
These Fastback Quarter Window Lower Pivot Cover are designed from the original part for superior fitment, finish and function. The cover pair installs on pivot rod at fiberglass interior panel.
Fastback Rear Window Louver Gaskets
p/n: 20-2857-83
A six (6) piece Fastback Rear Window Louver Gasket set designed from the original part for superior fitment and function. These gaskets or pads serve to protect the paint when installing the rear window louvers.
Fender Welting
p/n: 20-1591-44
This black Fender Welting is designed from the original part for superior fitment and seal. This welting material fits between the fenders and the vehicle body. Eight (8) foot length.