Turn signal light gasket
p/n: 20-0749-16
Gaskets, side marker light. Front and rear. Four (4) piece set.
Firewall to Hood Weatherstrip
p/n: 70-3465-42
This Firewall to Hood Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile made in sponge rubber. This weatherstrip installs at the rear of the engine bay to seal between the hood and the vehicle firewall.
Side Marker Light Gaskets
p/n: 70-4335-17
This Side Marker Light Gasket set is designed as a premium upgrade over the original part for superior fitment and a highly finished look. Fully molded gaskets installs between the side marker and body when not using a chrome bezel.
Kick Panel Hole Cover
p/n: 70-4536-45
This Kick Panel Hole Cover is designed from the original part for superior fitment and function. Cover is made from high-quality EPDM 80 durometer dense rubber to provide excellent durability and service.
Stabilizer Bar End Link Set
p/n: 60-0221-33
Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt 3/8"-16 NF x 6-15/16" long. Comes with metal sleeve, metal cup washers and rubber grommets.
Fuel Tank Mounting Isolator Set
p/n: 70-4628-41
This six (6) piece Fuel Tank Mounting Isolator Set is a reproduction of the original style fuel tank isolator set. Replacing or adding the isolator strips and pads can help eliminate noise or friction between the fuel tank straps and the body.
Inner Fender Splash / Dust Shield Set
p/n: 70-4669-45
This four (4) piece Inner Fender Splash / Dust Shield Set is designed from the original part for superior fitment and seal. Inner Fender pieces are die-cut from quality masticated rubber to authentic original dimensions. These pieces fit to the inner front fenders.
Tailgate Drain Seals
p/n: 70-4007-84
This Tailgate Drain Seal pair includes right and left sides that install at the bottom of the tailgate. These seals are properly molded from originals for a factory like fit.
Window Locking Strip - Black
p/n: 70-1918-52
This Window Locking Strip is designed from the original part for superior fitment and function. Front or rear window retainer made from top quality black EPDM rubber. Available in 15ft lengths.
Firewall to Hood Weatherstrip
p/n: 70-3123-42
This Firewall to Hood Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. Installs with the pre-installed clips on the front edge of the cowl.
Taillight Lens Gaskets
p/n: 20-2667-15
This Taillight Lens Gasket pair is designed from the original part for superior fitment, finish and function. These reproduction gaskets fit between taillight lens and taillight housing.
Windshield Wiper Pivot Gaskets
p/n: 20-0808-53
This four (4) piece Windshield Wiper Pivot Gasket set is designed from the original part for superior fitment and seal. This reproduction gasket is die cut from original style EPDM rubber for an authentic fitment, finish and function.
Splash Apron / A-Arm Dust Shield Filler Set
p/n: 70-4670-45
This four (4) piece Splash Apron / A-Arm Dust Shield Filler set is designed from the original part for superior fitment and seal. Filler pieces are die-cut from quality masticated rubber to authentic original dimensions. Left and Right pieces fit over suspension a-arms and inside front inner fenders.
Cowl to Fender Seals
p/n: 70-3340-43
This two (2) piece Cowl to Fender Seal pair is designed from the original part for superior fitment and seal. Fender seals are die cut from quality masticated rubber to authentic original dimensions.
Rear Leaf Spring Insulator
p/n: 70-0980-32
This Rear Leaf Spring Insulator is an exact replacement for the upper and lower spring pad. Two and one half (2-1/2) inches wide, with cloth reinforcement. Four (4) used per car.
Paint Reseal and Gasket Set
p/n: 70-4310-44
This Paint Reseal Gasket Set contains like original design reproductions for the vehicles specific exterior pieces. These reproductions are die-cut from quality materials to the original design for superior performance, durability, and a factory like fit.
Glass Run Channel - Vent Window Delete
p/n: 70-3891-58
This Glass Run Channel pair is for applications where the vent window has been eliminated. One pair fits both driver (Left) and passenger (Right) side doors.
Window Locking Strip - Black
p/n: 70-2195-52
This extruded Locking Strip is used to retain windshield gaskets in pickups and vans. Designed from the original part for superior fitment, finish and function. Available in 16ft lengths.
Brake and Clutch Pedal Pads
p/n: 70-3003-22
This reproduction Clutch and Brake Pedal Pad pair slips over the full perimeter of the brake pedal for a precise, factory fit. A square style direct fit reproduction to replace worn original pedal pads. Manufactured in black rubber.
Fender Welting
p/n: 20-1591-44
This black Fender Welting is designed from the original part for superior fitment and seal. This welting material fits between the fenders and the vehicle body. Eight (8) foot length.
Splash Apron / A-Arm Dust Shield
p/n: 70-3058-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit over suspension a-arms and inside front inner fenders.
Firewall to Hood Weatherstrip - Cowl Lacing
p/n: 20-0790-42
This Firewall to Hood Weatherstrip is made of high quality EPDM dense rubber and to the original design for a factory like fit and appearance. Comes with pre-drilled mounting holes and mounting clips installed.
Hood to Cowl Weatherstrip
p/n: 70-3924-43
This Hood to Cowl Weatherstrip has the proper rubber cross section and is made from top quality rubber to ensure durability and seal. Designed from the original part for a superior fitment and seal.
Door Jamb Wire Loom Grommets
p/n: 70-4870-70
These Door Jamb Wire Loom Grommets go between the door and door jam and allow you to run wires or cables through them. They make great complements to power window kits, shaved door kits, or custom stereo installs.
Splash Apron Fender Seal
p/n: 20-0877-44
This Splash Apron Fender Seal pair installs from the inner fender panel to the firewall. Made of high quality EPDM rubber and to the original design for a factory like fit.
Splash Apron / A-Arm Dust Shield Fillers
p/n: 70-3483-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces fit over suspension a-arms and inside front inner fenders.
Fuel Neck Grommet
p/n: 70-2284-41
This Fuel Filler Neck Grommet is designed from the original part for superior fitment and seal. This grommet fits around the vehicles fuel filler neck between the filler neck and vehicle body. Fully molded out of gasoline resistant BUNA high quality rubber.
Trunk Weatherstrip
p/n: 70-0774-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 70-3052-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Front Stabilizer Bar End Link Set
p/n: 70-2111-33
A twenty-two (22) piece Front Stabilizer Bar End Link set. Comes complete with fasteners, metal sleeves, metal cup washers and black rubber bushings. One (1) end link set for both sides of stabilizer bar on one (1) car.
Engine Top Cover Weatherstrip
p/n: 70-3469-88
This Engine Top Cover Gasket is an original design reproduction made from top quality sponge rubber. This gasket attaches between the removable engine cover ("doghouse") and the vehicle firewall / floorboard.
Firewall to Hood Weatherstrip
p/n: 20-2760-42
This Firewall To Hood Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and the vehicle firewall.
Window Gasket Locking Strip - Chrome
p/n: 70-1919-52
This chrome appearing Window Gasket Locking Strip is designed from the original part for superior fitment and seal. Locking strip serves as the front or rear window gasket retainer. Sixteen (16') foot length single piece, one application, for complete coverage.
Accelerator Pedal Pad
p/n: 20-0678-40
Pedal, accelerator. Molded rubber design. Trucks (F100-200) after Serial #696,001.
Roof To Quarter Panel Seals
p/n: 70-4012-68
This Roof To Quarter Panel Seal pair for both the left and right side, mount between the bedside quarter panel and the hardtop roof.
Trunk Weatherstrip
p/n: 70-0773-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 82-0028-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Push-Out Window Weatherstrip
p/n: 70-4038-81
This Push-Out Window Weatherstrip is for the side OR rear push-out windows. This outer gasket goes around the outside perimeter of the frame and seals against the van when the window is closed.
Chrome Bumper To Body Splash Shield Filler
p/n: 70-4858-47
This Chrome Bumper To Body Splash Shield Filler is designed from the original part for a superior fitment. This bumper filler is approximately fifty-eight and three-eighths (58-3/8") inches long and fits between the vehicle body and the chrome rear bumper.</p>
Chrome Mylar Locking Strip
p/n: 70-3425-52
This Chrome Mylar Locking Strip inserts into the weatherstrip to lock in the glass for the rear window. The strip is designed to be installed during glass replacement.
Windshield Frame to Cowl Weatherstrip
p/n: 70-3004-42
This Windshield Frame to Cowl Weatherstrip is designed from the original part for superior fitment and seal. This cowl rubber goes in between the windshield frame and cowl. This part also fits the 1952-1971 M38A1 model.
Trunk Decklid Weatherstrip
p/n: 20-0095-84
This Trunk Decklid Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 20-0302-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The decklid weatherstrip mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 70-2124-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Transmission Mount
p/n: 20-0602-11
This Transmission Mount, rear engine mount, is made to original specifications for an authentic fit and appearance. Used for manual or automatic transmissions.
Upper Door - Roof Rail Weatherstrips
p/n: 70-2436-73
This Upper Door - Roof Rail Weatherstrip pair is made of high-quality EPDM rubber with vulcanized corners for a factory like fit. These upper, left and right door weatherstrips seal the door window frame to the hardtop and to the windshield frame.
Gearshift Knob
p/n: 20-0763-24
This black column shift lever Gearshift Knob is designed from the original part for a superior fit and finish. This reproduction part is a direct screw on replacement for that broken, aged-out original knob.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-0774-WT
This Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Hood to Radiator Weatherstrip
p/n: 70-4889-43
This Hood to Radiator Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the front of the engine bay to seal between the radiator support / grill and seals against the hood.
Convertible Top Decklid Weatherstrip
p/n: 70-3950-67
This Convertible Top Decklid Weatherstrip is designed from the original part for a superior fitment and seal. This rubber seal mounts around the full perimeter of the soft top storage compartment.
Cowl to Fender Filler Weatherstrips
p/n: 70-3940-43
This Cowl To Fender Filler Weatherstrip pair is made from top quality rubber and designed from originals for a superior fitment and seal.
Upper Door Weatherstrips - Top of Door
p/n: 20-0819-72
This Upper Door Weatherstrip pair is designed from the original parts for superior fitment and seal. Used as an upper / top of door weatherstrip on both doors. This part was used on 1978-1979 Ford Trucks but can also be retrofitted to 1973-77 Ford Pickups as well to improve the door seal.
Windshield Frame Upper (Header) Weatherstrip
p/n: 70-4476-52
This Windshield Frame Upper (Header) Weatherstrip is designed from the original part for superior fitment and sealing. This windshield frame upper weatherstrips mounts to seal between the windshield frame and hardtop of the vehicle. Made of a high-quality EPDM rubber as the original.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-0773-WT
This Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Hood to Cowl Weatherstrip
p/n: 70-3146-42
This three (3) piece Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip set installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
1973-1978 Chevy And GMC Truck Factory Parts, CD
p/n: 07-1417-07
This GM Licensed Detroit Iron CD provides the most comprehensive set of digital Chevrolet and GMC Factory parts manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
Trunk Weatherstrip
p/n: 70-1438-85
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Tailgate Weatherstrip
p/n: 70-2434-72
This Tailgate Weatherstrip reproduction is designed from the original part for superior fitment and seal. This weatherstrip mounts on three (3) sides of the tailgate with weatherstrip adhesive (not included).
Trunk Weatherstrip
p/n: 82-0030-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Brake and clutch shank seal
p/n: 20-0758-23
Seal, clutch rod to floor. Useage: 1971-72: F100-350 series AFTER Serial #M00,001 1973-79: F100-350 series trucks
Heat and Sound Insulator Underlayment Set
p/n: 70-4671-88
This four (4) piece die-cut Heat and Sound Insulator Underlayment Set lays under the carpet. This insulator underlayment will decrease road noise and decrease heat inside the interior compartment. Pre-cut and ready to be installed into your vehicle to improve driving comfort.
Window Felt Beltline Weatherstrips - 3ft Pair
p/n: 30-0244-57
This side window Window Felt Beltline Weatherstrip pair can be used as inner and/or outer. The weatherstrip is flexible, pile lined, rubber covered, with black bead. Available in 3ft pairs.
Heat and Sound Insulator Underlayment Set
p/n: 70-4672-88
This four (4) piece die-cut Heat and Sound Insulator Underlayment Set lays under the carpet. This underlayment will decrease road noise and decrease heat inside the interior compartment. Pre-cut and ready to be installed into your vehicle to improve driving comfort.
Axle Rebound Pad
p/n: 20-0647-32
Bumper, rear axle. Two (2) required per Truck. 1965-72: F100, F350 2 W/D (wheel drive), F100, F250 4 W/D (wheel drive).
Steering Column To Floor Seal
p/n: 20-0785-36
This Steering Column To Floor Seal is designed from the original part for superior fitment and seal. Restores the cab to floor sealing against the outside elements. For Manual Steering models.
Trunk or Hatchback Weatherstrip
p/n: 20-2866-84
This Trunk or Hatchback Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Firewall to Hood Weatherstrip - Cowl Lacing
p/n: 70-3374-42
This Firewall to Hood Weatherstrip - Cowl Lacing is designed from the original part for superior fitment and seal. Measuring 67-1/2” long x 1-1/4” wide to provide complete coverage.
Hood to Cowl Weatherstrip
p/n: 70-1640-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. This 38-1/2” long x 11/16” wide weatherstrip provides complete coverage.
Firewall to Hood Weatherstrip - Cowl Lacing
p/n: 20-1091-42
This Firewall To Hood Weatherstrip - Cowl Lacing mounts under the rear of the hood on the cowl panel. This is a die-cut extrusion with pre-installed clips as original.
Body Bumper Kit
p/n: 90-0217-90
This fourteen (14) piece Body Bumper Kit is designed from the original part for superior fitment, finish and function. Designed from originals and made from top quality rubber to ensure durability.
Clutch Release Lever Boot
p/n: 20-0761-24
This Clutch Release Lever Boot is designed from the original part for superior fitment and seal. This boot is for the clutch release lever to clutch housing.
Front Suspension Rubber Bumper Set
p/n: 82-0176-32
Front Suspension Rubber Bumper Kit - A four (4) piece set with both upper and lower arm rubber bumpers in one set.
Taillight Lens Gasket
p/n: 70-3565-15
Gasket, taillight lens mounting gasket. Machine die cut from 1/4" thick sponge rubber. Seals tail light lens to tail light assembly. Included in our kit #70-3566-15.
Rear Cargo Door Hinge Gaskets Set
p/n: 60-0659-69
This four (4) piece molded Rear Cargo Door Hinge Gasket Set is made to original specifications for proper fitment. Seals are fully molded from top quality rubber to ensure durability, fitment and proper seal.
Hood to Cowl Weatherstrip
p/n: 70-1253-42
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts at the rear of the engine bay directly to the body. Seventy-two (72") inches OAL and includes fifteen (15) 70-1255-42 plastic clips for installation.
Front Lower Control Arm Bumper
p/n: 20-0202-32
This Front Lower Control Arm Bumper is designed from the original part for superior fitment, finish, and function. This suspension bumper mounts to the front lower control arm to prevent metal to metal contact.
Hardtop to Body Header Weatherstrip
p/n: 70-4891-68
This removable Hardtop to Body Header Weatherstrip is designed from the original part for superior fitment and sealing. Weatherstrip mounts on the top of the body and seals against the front of the shell with weatherstrip adhesive glue (not included).
Peel-N-Stick Trunk Weatherstrip
p/n: 70-1438-WT
This Peel-N-Stick Trunk Weatherstrip is designed for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk decklid to seal directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Liftgate to Tailgate Weatherstrip
p/n: 70-4158-85
This Liftgate to Tailgate Weatherstrip reproduction is designed from the original part for superior fitment and seal. This liftgate seal mounts to the liftgate with screws (not included).
Window Locking Strip - Chrome
p/n: 70-2196-52
This Chrome Locking Strip is used to retain windshield gaskets in pickups and vans. Designed from the original part for superior fitment, finish and function. Available in 16ft. lengths.
Rear Window Gasket without Groove
p/n: 70-4513-83
This Rear Window Gasket for Standard Cabs mounts around the full perimeter of the back glass. This is a standard black EPDM rubber seal with NO reveal molding groove.
Vent Window Division Post Weatherstrips
p/n: 70-1923-56
This Front Vent Window Division Post Weatherstrip pair is designed from the original part for superior fitment and seal. This piece mounts on the vertical division bar with rivets and the vent glass closes against it.
Fuel Filler Pipe To Trunk Floor Seal
p/n: 20-2739-41
This Fuel Filler Pipe To Trunk Floor Seal is designed from the original part for superior fitment and seal. This part fits around the vehicles fuel filler pipe between the filler pipe and the trunk floor.
Trunk Weatherstrip
p/n: 20-2867-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Rigid Run Channel
p/n: 20-0813-58
Channel, rigid division bar run. For front edge of door glass. Two (2) required per truck. Use for either right or left side.
Rear Liftgate Window Gasket without Groove
p/n: 70-4003-83
This Rear Liftgate Window Gasket without Trim Groove fits the rear liftgate window of the Bronco's Removable Hardtop. It's made from ozone resistant EPDM rubber and to the same specifications as the original for an authentic factory fit and finish.
Window Felt Inner Beltline Weatherstrips
p/n: 80-0417-57
This is a high-quality material Window Felt Inner Beltline side window horizontal weatherstrip set (also known as beltline weatherstrip). This two (2) set includes only the inner seals (the part sealing the interior of the car) for the door side windows.
1968-1975 Pontiac Factory Parts Manual, CD
p/n: 07-1414-07
This GM Licensed Detroit Iron CD provides the most comprehensive set of digital Pontiac Factory parts manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
Liftgate Weatherstrip
p/n: 70-3477-84
This Liftgate Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the liftgate opening directly to the body.
Fuel Filler Neck Grommet
p/n: 70-2581-39
This Fuel Filler Neck Grommet is designed from the original part for superior fitment and seal. This grommet fits around the vehicles fuel filler neck between the filler neck and vehicle body.