1" Trunk Weatherstrip
p/n: 70-0510-85
This Trunk Weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. Available by the foot.
1-1/4" Body Hole Plug
p/n: 20-1039-21
This Body Hole Plug is designed from the original part for superior fitment, finish and function. This plug is made from high quality EPDM dense rubber to provide excellent durability. This body plug covers a sheet metal hole that is one and one fourth (1-1/4") inches in diameter.
1973-1978 Chevy And GMC Truck Factory Parts, CD
p/n: 07-1417-07
This GM Licensed Detroit Iron CD provides the most comprehensive set of digital Chevrolet and GMC Factory parts manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
1978 Ford Truck & Van Factory Shop Manual, CD
p/n: 07-1257-07
This FORD-Licensed Detroit Iron CD contains the most comprehensive set of digital OEM shop manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
3/4" Body Hole Plug
p/n: 20-1038-21
This Body Hole Plug is designed from the original part for superior fitment, finish and function. This plug is made from high quality EPDM dense rubber to provide excellent durability. This body plug covers a sheet metal hole that is three-fourths (3/4") inches in diameter.
5/16” Round Top Hood Bumper
p/n: 20-2755-42
This Hood Bumper pair is a quality reproduction of the original factory part. This rubber bumper attaches to the front radiator support to cushion / bump stop the hood closure.
Adjustable Hood Bumper
p/n: 70-2715-42
This Radiator Support to Hood Bumper is a quality replacement for the original factory part. This adjustable bumper attaches to the radiator support to cushion / stop the hood closure. Usually requires two (2) front bumpers each per vehicle.
Adjustable Hood Bumper
p/n: 70-1084-42
This Adjustable Hood Bumper is designed from the original part for superior fitment, finish and function. Adjustable with molded on rubber cap.
Axle Rebound Pad
p/n: 20-0647-32
Bumper, rear axle. Two (2) required per Truck. 1965-72: F100, F350 2 W/D (wheel drive), F100, F250 4 W/D (wheel drive).
Body Hole Plug
p/n: 20-1040-21
This Body Hole Plug is designed from the original part for superior fitment, finish and function. This plug is made from high quality EPDM dense rubber to provide excellent durability. This body plug covers a sheet metal hole that is one and one half (1-1/2") inch in diameter.
Body Hole Plug
p/n: 20-0764-24
Plug, fill hole. Used where clutch rod goes on standard transmission.
Body Weatherstrip Kit
p/n: 90-3306-90
This seven (7) piece Body Weatherstrip Kit includes the major weatherstrip components needed for your restoration project. These parts are designed from originals with fully molded corners and end pieces for superior performance and a factory fit.
Body Weatherstrip Kit
p/n: 90-3317-90
This five (5) piece Body Weatherstrip Kit includes the major weatherstrip components needed for your restoration project. These parts are designed from originals with fully molded corners and end pieces for superior performance and a factory fit.
Body Weatherstrip Kit
p/n: 90-3319-90
This five (5) piece Body Weatherstrip Kit includes the major weatherstrip components needed for your restoration project. These parts are designed from originals with fully molded corners and end pieces for superior performance and a factory fit.
Body Weatherstrip Kit
p/n: 90-3371-90
This twenty (20) piece Body Weatherstrip Kit includes the major weatherstrip components needed for the body of your classic Chevrolet / GMC truck restoration project. This kit is for trucks having a Black Locking Strip around the Windshield and Rear Window glass.
Body Weatherstrip Kit
p/n: 90-3369-90
This fifteen (15) piece Body Weatherstrip Kit includes the major weatherstrip components needed for the body of your classic Ford truck restoration project. We’ve put everything together in one simple and convenient kit.
Body Weatherstrip Kit
p/n: 90-3372-90
This twenty (20) piece Body Weatherstrip Kit includes the major weatherstrip components needed for the body of your classic Chevrolet / GMC truck restoration project. We’ve put everything together in one simple and convenient kit. This kit is for trucks having a Chrome Locking Strip around the Windshield and Rear Window glass.
Body Weatherstrip Kit
p/n: 82-0005-90
This eight (8) piece Body Weatherstrip Kit includes the major weatherstrip components needed for the body of your classic restoration vehicle. We’ve put everything together in one simple and convenient kit.
Body Weatherstrip Kit
p/n: 90-3305-90
This seven (7) piece Body Weatherstrip Kit includes the major weatherstrip components needed for your restoration project. These parts are designed from originals with fully molded corners and end pieces for superior performance and a factory fit.
Body Weatherstrip Kit
p/n: 90-3373-90
This sixteen (16) piece Body Weatherstrip Kit includes the major weatherstrip components needed for the body of your classic Chevrolet / GMC truck restoration project. This kit is for trucks having No Locking Strip around the Windshield and Rear Window glass.
Body Weatherstrip Kit
p/n: 90-3367-90
This fifteen (15) piece Body Weatherstrip Kit includes the major weatherstrip components needed for the body of your classic Ford truck restoration project. We’ve put everything together in one simple and convenient kit.
Body Weatherstrip Kit
p/n: 90-3318-90
This five (5) piece Body Weatherstrip Kit includes the major weatherstrip components needed for your restoration project. These parts are designed from originals with fully molded corners and end pieces for superior performance and a factory fit.
Body Weatherstrip Kit
p/n: 90-3293-90
This ten (10) piece kit includes the major weatherstrip components and some other essential parts needed for your restoration project.
Brake Adjustment Hole Cover Plug
p/n: 70-1092-24
A quality molded rubber Brake Adjustment Hole Cover Plug that inserts into brake adjustment hole in the backing plate. Most models with drum brakes. Length: 1.25 inches. Height: .875 inches.
Brake and Clutch Pedal Pads
p/n: 70-3003-22
This reproduction Clutch and Brake Pedal Pad pair slips over the full perimeter of the brake pedal for a precise, factory fit. A square style direct fit reproduction to replace worn original pedal pads. Manufactured in black rubber.
Brake and clutch shank seal
p/n: 20-0758-23
Seal, clutch rod to floor. Useage: 1971-72: F100-350 series AFTER Serial #M00,001 1973-79: F100-350 series trucks
Brake or Clutch Pedal Pad - Manual
p/n: 60-0709-22
A top-quality rubber Clutch or Brake Pedal Pedal Pad reproduction. One (1) each slip-over type pedal pad installs over the full perimeter of the brake or clutch pedal for a precise, factory fit. For manual transmission model GM vehicles only.
Brake Pedal Pad
p/n: 70-4590-22
This reproduction Pedal Pad slips over the full perimeter of the brake pedal for a precise, factory fit. Replaces original brake pedal pads. Detailed and finished to match the original appearance.
Brake Pedal Pad - Automatic
p/n: 60-0710-22
This reproduction Brake Pedal Pad slips over the full perimeter of the brake pedal for a precise, factory fit. A direct fit to replace worn, heavy wear original brake pedal pads. For GM models with an automatic transmission.
Brake Pedal Pad - Automatic
p/n: 70-4589-22
This reproduction Pedal Pad slips over the full perimeter of the brake pedal for a precise, factory fit. Replaces original brake pedal pads for automatic transmission models. Detailed and finished to match the original appearance.
Bronco Script Brake OR Clutch Pedal Pad
p/n: 70-4480-22
This reproduction Brake OR Clutch Pedal Pad slips over the full perimeter of the brake or clutch pedals for a precise, factory fit. Replaces original brake or manual transmission clutch pedal pads.
Bronco Script Brake Pedal Pad, Automatic
p/n: 70-4481-22
This reproduction Brake Pedal Pad slips over the full perimeter of the brake pedal for a precise, factory fit. Replaces original brake pedal pad for automatic transmissions with power brakes.
Cab To Frame Mounting Pad Set
p/n: 20-0802-48
This thirty-six (36) piece Cab to Frame Mounting Pad set is designed from the original parts for superior fitment and function.
Chrome Mylar Locking Strip
p/n: 70-3425-52
This Chrome Mylar Locking Strip inserts into the weatherstrip to lock in the glass for the rear window. The strip is designed to be installed during glass replacement.
Clutch or Brake Pedal Pad
p/n: 20-0848-22
This reproduction Clutch and/or Brake Pedal Pad slips over the full perimeter of the pedal for a precise, factory fit. A perfect reproduction to replace worn original pedal pads. Manufactured in quality black rubber.
Clutch Release Lever Boot
p/n: 20-0761-24
This Clutch Release Lever Boot is designed from the original part for superior fitment and seal. This boot is for the clutch release lever to clutch housing.
Corner Joint Sleeves
p/n: 70-3720-52
Corner Joint Sleeve pair for the bottom corners of rear window gaskets that require a locking strip. These joint sleeves have a Chrome look to match the Mylar locking strip. Joint sleeves can also be painted black when using with the black rubber locking strip.
Cowl to Fender Filler Weatherstrips
p/n: 70-3940-43
This Cowl To Fender Filler Weatherstrip pair is made from top quality rubber and designed from originals for a superior fitment and seal.
Cowl to Fender Seals
p/n: 70-3340-43
This two (2) piece Cowl to Fender Seal pair is designed from the original part for superior fitment and seal. Fender seals are die cut from quality masticated rubber to authentic original dimensions.
Cowl Top Plug
p/n: 20-1813-20
This Cowl Top Plug is designed from the original part for an authentic fit, finish, and appearance. This plug installs in the access hole in cowl top.
Door Bumper
p/n: 70-2877-71
Bumper, door. Requires two (2) per door - one (1) upper on door and one (1) lower on door.
Door Bumper, Upper / Lower
p/n: 20-2825-71
This Door Bumper is a quality reproduction of the original factory part. Upper / Lower push-in type. Four (4) required per car.
Door End Cap Fillers
p/n: 70-4673-73
This Door End Cap Filler pair manufactured with soft, yet durable, closed-cell EPDM sponge rubber with galvanized steel cores. Designed from the original part for superior fitment, finish and function.
Door Handle Gasket Set
p/n: 70-1647-69
This Door Handle Gasket Set is designed from the original part for superior fitment and seal. This four (4) piece gasket set will do two (2) doors.
Door Handle Mounting Gaskets
p/n: 70-4967-69
This four (4) piece Door Handle Mounting Gasket set is molded from quality materials to the original design for superior performance, durability, and a factory like fit. Commonly used during a vehicle re-paint.
Door Jamb Wire Loom Grommets
p/n: 70-4870-70
These Door Jamb Wire Loom Grommets go between the door and door jam and allow you to run wires or cables through them. They make great complements to power window kits, shaved door kits, or custom stereo installs.
Door Lock Gasket
p/n: 70-4966-69
This reproduction Door Lock Gasket is molded from quality materials to the original design for superior performance, durability, and a factory like fit. Commonly used during a vehicle re-paint.
Door Weatherstrip
p/n: 70-3367-72
Door edge weatherstrip. This part is the primary door to body weatherstrip.
Door weatherstrip
p/n: 70-2291-72
Door edge weatherstrip. This part is the primary door to body weatherstrip. Includes attached end cap fillers.
Door Weatherstrip
p/n: 60-0720-72
Door edge weatherstrip. This part is the primary door to body weatherstrip.
Door Weatherstrip Set
p/n: 82-0206-72
This quality five (5) piece Door Weatherstrip Set is for vans with sliding side doors. These are the primary door to body weatherstrip for the front doors, rear doors and side sliding door.
Door Weatherstrip Set
p/n: 82-0207-72
This is a quality six (6) piece Door Weatherstrip set for vans with cargo (barn) style doors. These are the primary door to body weatherstrips for the front doors, rear doors and side hinged cargo doors.
Door Weatherstrips
p/n: 70-4512-72
This Door Weatherstrip pair is designed from the original parts for superior fitment and seal. These door weatherstrips mount, with pre-installed pins, directly on the vehicle body to seal the driver and passenger doors when closed.
Door Weatherstrips
p/n: 82-0165-72
This Door Weatherstrip pair is designed from the original parts for superior fitment and seal. These primary door to body weatherstrips are made with top quality rubber with proper molded ends and clips.
Door Weatherstrips
p/n: 82-0008-72
This Door Weatherstrip is pair from the original part for superior fitment and seal. This seal mounts around the front, bottom, and rear of the door using pre-installed clips.
F-100 Brake OR Clutch Pedal Pad
p/n: 70-4484-22
This reproduction F-100 script Brake OR Clutch Pedal Pad slips over the full perimeter of the brake or clutch pedal for a precise, factory fit. Replaces original brake or manual transmission clutch pedal pads.
F-100 Brake Pedal Pad, Automatic
p/n: 70-4485-22
This reproduction F-100 Brake Pedal Pad slips over the full perimeter of the brake or clutch pedal for a precise, factory fit. Replaces original brake pedal pads for automatic transmissions.
F-150 Brake OR Clutch Pedal Pad
p/n: 70-4486-22
This reproduction F-150 Brake OR Clutch Pedal Pad slips over the full perimeter of the brake or clutch pedal for a precise, factory fit. Replaces original brake or manual transmission clutch pedal pads.
F-150 Brake Pedal Pad, Automatic
p/n: 70-4487-22
This reproduction F-150 Brake Pedal Pad slips over the full perimeter of the brake pedal for a precise, factory fit. Replaces original brake pedal pads for automatic transmissions.
Fender Welting
p/n: 20-1591-44
This black Fender Welting is designed from the original part for superior fitment and seal. This welting material fits between the fenders and the vehicle body. Eight (8) foot length.
Firewall to Hood Weatherstrip
p/n: 70-3123-42
This Firewall to Hood Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. Installs with the pre-installed clips on the front edge of the cowl.
Firewall To Hood Weatherstrip - Cowl Lacing
p/n: 20-1091-42
This Firewall To Hood Weatherstrip - Cowl Lacing mounts under the rear of the hood on the cowl panel. This is a die-cut extrusion with pre-installed clips as original.
Firewall to Hood Weatherstrip - Cowl Lacing
p/n: 70-3374-42
This Firewall to Hood Weatherstrip - Cowl Lacing is designed from the original part for superior fitment and seal. Measuring 67-1/2” long x 1-1/4” wide to provide complete coverage.
Firewall To Hood Weatherstrip - Cowl Lacing
p/n: 20-0790-42
This Firewall To Hood Weatherstrip - Cowl Lacing is made of high-quality EPDM dense rubber and to the original design for a factory like fit and appearance. Comes with mounting clips installed.
Firewall To Hood Weatherstrip Set
p/n: 70-2873-43
This Firewall To Hood Weatherstrip Set is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip set installs at the rear of the engine bay to seal between the closing hood and the vehicle firewall.
Flexible Plastic Chrome Molding
p/n: 20-0828-83
This Flexible Plastic Chrome Molding is designed to go into the groove around the perimeter of the glass. It is a flexible plastic strip with a decorative chrome mylar finish and two (2) clips to join the ends.
Front Door Vent Window Set
p/n: 90-0467-90
This front door vent window weatherstrip set is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.