Cab To Frame Mounts - Revulcanization Service Only
p/n: 70-2212-48
This Rear Cab To Frame Mounts - Revulcanization Service Only is designed to restore your truck's rear cab mounts to a like new original condition. Please call or email for more service details and ordering.
Radiator Support To Frame Pads w/Hardware Set
p/n: 70-5171-31
This Radiator Support To Frame Pads w/Hardware Set is designed from the original parts for superior fitment and function. Crafted to OEM specifications these mounts are softer and surpass the rigidity of other hard mounts.
Cab To Frame Mounting Pad Set
p/n: 20-0698-48
This twenty-six (2) piece Cab to Frame Body Mounting Pad set is designed from the original parts for superior fitment and function. This set is designed to mount your cab to the frame.
Radiator Mounting Pads
p/n: 30-0121-31
A four (4) piece Radiator Mounting Pad set for mounting the Radiator Core Cradle To Tie Rod Frame. Fully molded rubber. 1st type design with locating boss.
Radiator Support To Frame Pad Set
p/n: 20-0772-31
This eighteen (18) piece Radiator Support To Frame Mounting Pad Set is designed from the original parts for a factory like appearance and function. This set fits F-100 2-wheel drive models but will work for F-250 and F-350 models by adding extra metal washers.
Body Mounting Pads
p/n: 70-0298-48
Left and Right Body Mounting Pads for front bracket. Fully molded rubber pads are installed between the frame and the floor pans.
Radiator or Rear Stabilizer Mounting Pads
p/n: 30-0309-31
A four (4) piece Mounting Pad set with several uses. Can be used for mounting the Radiator Core Cradle To Tie Rod Frame or for the Rear Stabilizer Bar Mounting Pad to where the leaf springs are bolted. Fully molded rubber. 2nd type design with chamfered edge.
Cab To Frame Mounting Pad Assembly
p/n: 90-3815-90
A Cab To Frame Mounting Pad Assembly designed from the original part for an authentic fit and function. These reproduction upper and lower insulator pads install between the cab and frame. Includes hardware.
Radiator Support Mounting Pad Assembly
p/n: 90-3816-90
A Radiator Support Mounting Pad Assembly designed from the original part for an authentic fit and function. These reproduction upper and lower insulator pads install between the radiator support and frame. Includes hardware.
Radiator Mounting Pad
p/n: 30-0209-31
Shim, radiator core mounting stud spacer. Fully molded rubber. Use as required. Comes as a pair of two (2). Two and seven eighths inch (2 7/8") square by five eighths inch (5/8") inside hole diameter by three eighths inch (3/8") height.
Body To Frame Webbing
p/n: 20-1599-48
This Body To Frame Webbing is designed from the original part for superior fitment and function. This webbing is used to shim the body to the frame. Also used as a noise reducer material. Webbing is two (2) inch wide, twenty-five (25) foot long roll.
Body Mounting Pad
p/n: 70-0299-48
This fully molded Body Mounting Pad is for the body bracket. Two (2) collars and retaining rings. Four (4) needed per car.
Rear Body Bumpers
p/n: 60-0412-48
This fully molded reproduction Rear Body Bumper pair is designed from the original part for an authentic fit and function. These rear body bumpers fit at the rear body hold-down bolts.
Body To Frame Mounting Pads
p/n: 70-3343-48
This two (2) piece Body to Frame Mounting Pad set is designed from the original part for superior fitment and seal. Pieces are made of fully molded EPDM rubber. Two (2) sets required per vehicle.
Body Mounting Pad
p/n: 60-0383-48
This Body Mounting Pad is designed from the original part for superior fitment and function. Rectangular. shape, fully molded rubber with metal core, locating collar and metal bolt sleeve.
Front Fender to Apron Seal
p/n: 20-2504-45
This Front Fender to Apron Seal installs on the fender to inner apron. Excellent for when assembling front sheet metal. Sold as a fifteen (15) foot roll.
Body Mounting Pad Set
p/n: 70-2283-48
A three (3) piece direct fit Body Mounting Pad Set to include replacement pads for the upper insulator, the middle insulator, and for the bottom cone shaped insulator. These reproduction body mounts install between the frame and the body floor pans.
Body Mounting Pad
p/n: 27-0101-48
This Body Mounting Pad is fully molded rubber with a metal core and locating collar. These frame pads are installed between the frame and the floor pans.
Body To Frame Mounting Pad
p/n: 60-0188-48
This Body To Frame Mounting Pad with locating collar functions as a body to frame isolator mounting pad. Molded from a top-quality EPDM rubber with a metal core, locating collar, and metal bolt. Two (2) required per vehicle.
Radiator Support To Frame Pad w/Hardware Set
p/n: 70-5285-31
This Radiator Support To Frame Pad w/Hardware Set is designed from the original parts for superior fitment and function. This complete set contains the correct rubber pad and hardware for mounting the radiator support to the frame.
Body Mounting Pad
p/n: 60-0382-48
This Body Mounting Pad is designed from the original part for superior fitment and function. Rubber with metal core, locating collar and metal bolt sleeve as original.
Body Mounting Pad
p/n: 70-0929-48
This reproduction Body Mounting Pad is designed from the original part for an authentic fit and function. Fully molded rubber with metal core and locating collar as original part. Does not include any fastener hardware.
Body Mounting Pad
p/n: 27-0092-48
This Body Mounting Pad is fully molded rubber with a metal core and locating collar. These frame pads are installed between the frame and the floor pans.
Bolt Insulator - Body Mounting Pad
p/n: 27-0079-48
This Bolt Insulator - Body Mounting Pad is fully molded rubber with a metal core and locating collar. This bolt insulator fits to the mounting bolt for body to frame mounting. Number used varies per car model.
Body Mounting Pad
p/n: 70-1749-48
This Body Mounting Pad is fully molded rubber with a metal core and locating collar. These frame pads are installed between the frame and the floor pans.