Hinge Pillar and A-Post Weatherstrips
p/n: 82-0156-64
This Convertible Hinge Pillar and A-Post Weatherstrip pair is designed from the original part for superior fitment and sealing. This weatherstrip pair attaches to the windshield frame upper A-pillars and seal between the A-pillar post and the front section of the door or vent window frame when the door is closed.
Door Weatherstrip
p/n: 14-0020-70
Weatherstrip, door "plateau", to seal and shunt water to drain. Made with metal core and correct mounting holes.Length: 10.0 inches.
Running Board Door Opening Step Pads
p/n: 30-0216-49
This Running Board Door Opening Step Pad pair is designed from the original part for superior fitment and seal. Provides a perfect copy of the original accessory.
Door To Body Conduit - Power Window Wiring
p/n: 70-1538-70
This Door To Body Conduit set is designed from the original part for superior fitment and function. This is the sheathing conduit for the power windows wiring from the front door to the body through the hinge pillar.
Door Check Strap
p/n: 40-0536-70
Strap, door check. T-type, special heavy duty construction of rubber with multiple ply webbing, molded-in steel shank and molded-in steel crossbar. Full length as original with one eighth (1/8) inch by seven eighths (7/8) inch steel crossbar.
Lower U-Jamb Lock Pillar Rear Seals
p/n: 70-3954-79
This Lower U-Jamb Lock Pillar Rear Seals pair, one for each door, is designed from originals and made for a like factory fit.
Upper U-Jamb Lock Pillar Seals
p/n: 70-3953-79
This pair of Upper U-Jamb Lock Pillar Seals, one for each door, is designed from originals and made for a like factory fit.
Dash to Door Windlace Weatherstrips
p/n: 70-3952-72
This Dash to Door Windlace Weatherstrip is a pair of manufactured weatherstrip seals, one for each door that are designed from originals and made for a like factory fit.
Dash to Door Windlace Weatherstrips
p/n: 70-3951-72
This Dash To Door Windlace Weatherstrip is a pair of manufactured weatherstrip seals, one for each door, that are designed from originals and made for a like factory fit.
Door Lock Striker Revulcanization Service
p/n: 30-0398-71
This Revulcanization Service Only is to restore your front or rear Door Lock Striker to it's like new original condition. Service requires your old metal striker core. Please call or email for more service details and ordering.
Door Check Straps - Black
p/n: 10-0145-70
Door Check Straps - loop type. Made from top quality Black rubber to ensure durability. This part is compatible with models built by Independent (1920 - 1932) automobile manufacturers.
Door Check Straps - Brown
p/n: 10-0145-89
Door Check Straps - loop type. Made from top quality Brown rubber to ensure durability. This part is compatible with models built by Independent (1920 - 1932) automobile manufacturers.
Door Check Straps
p/n: 40-0535-70
This T-type Door Check Strap pair is from special heavy-duty construction of rubber with multiple ply webbing and molded-in steel crossbar. Full length as original with one eighth (1/8) inch by seven eighths (7/8) inch steel crossbar.
Door Conduit Set - Wiring - Vacuum Hoses
p/n: 60-0655-21
A six (6) piece Door Conduit set for the front door electric window wires or power lock vacuum lines. The set includes two (2) hoses and two (2) pairs of grommets.
Door Conduit Set for Power Windows
p/n: 60-0653-21
This Door Conduit Set is designed from the original part for superior fitment and function. Conduit contains the front door electric window wires and/or power lock vacuum lines. Set includes two (2) hoses and three (3) pair of grommets. Length: 12.0 inches.
Rear Door Window Upper Seal
p/n: 70-4198-79
This Rear Door Window Upper Seal pair is designed from the original part for superior fitment and sealing. This rectangular shaped seal pair mounts to the rear door at the upper front and over the rear side window.
Door Filler Caps
p/n: 70-4637-70
This convertible model Door Filler Cap pair is designed from the original part for an authentic fit, finish, and function. These door fillers cap the top of the half-post between the front and rear doors on convertible models.
Door Jamb Pillar Filler Set
p/n: 70-5213-79
This four (4) piece Door Jamb Pillar Filler Set is designed from the original part for superior fitment, finish and function. Replace weatherworn and deteriorated original jamb fillers with this direct fit like OEM reproduction.
Rear Door Hinge Pillar Weatherstrip
p/n: 70-1655-70
Weatherstrip, rear door hinge pillar.Length: 2.75 inches.
Front Body Upper Pillar Drain Trough
p/n: 70-4212-73
This Front Body Upper Pillar Drain Trough pair is designed from the original part for superior fitment and seal. This left (LH) and right (RH) drain trough pair fits above the front upper door hinge, one per side.
Front Door Inner Dog Leg Weatherstrips
p/n: 20-1767-70
This Front Door Inner Dog Leg At Beltline Weatherstrip pair is designed from the original part for superior fitment and seal. This rubber weatherstrip installs on inner dog leg at the beltline of the front door.
Vent Frame Deflector
p/n: 70-1792-62
Deflector, beneath vent frame.Length: 5.75 inches. Width: 1.0 inches.
Front Door Hinge Pillar Weatherstrips
p/n: 70-0481-73
This at dash left and right Front Door Hinge Pillar Weatherstrip pair is designed from the original part for an authentic fit, finish and appearance. Located at top front of front door, under door flange. A reproduction molded over a metal core.
Vent Window Weatherstrip
p/n: 40-0502-57
This Vent Window Weatherstrip is a cushion for under the vent window frames. Measures 4.375 inches in Length. Sold as a pair.
Coupe Hinge Pillar Weatherstrips
p/n: 70-3934-63
This Coupe Hinge Pillar Weatherstrip attaches to the body and seals between the A-pillar post and the front section of the door or vent window frame when the door is closed.
Door Vent Window Foot
p/n: 20-2556-62
This Door Vent Window Foot installs at the base of the front door vent window frame. Sold as a pair.
Division bar grommet
p/n: 70-3135-62
Grommet, rear door vent divider post. Upper and lower, right and left. 4 piece set.
Door Conduit
p/n: 70-0828-21
Conduit, hydraulic line & power window wire. Front doors only. 2 pieces cut nine and one half (9-1/2) inches.Length: 9.50 inches. Height: 1.50 inches.
1-1/2" Wide Window Felt or Run Channel
Steele Rubber Products has the best quality flexible Window Felt or Glass Run Channel material for your Street Rod or Custom Build project. This part helps to eliminate window rattle, provides a smooth sliding surface for glass movement and works to protect the glass.
Door Check Strap Set
p/n: 70-5288-70
This Door Check Strap Set is designed from the original part for superior fitment and function. These check straps fit between the body post and door.
Door Hinge Pin and Bushing Set
p/n: 70-5120-70
This twelve (12) piece Door Hinge Pin and Bushing Set is designed from the original part for superior fitment and function. Replace worn and deteriorated original doo hinge pin and bushings with this direct fit like OEM reproductions.
Lower Corner Drip Gutters
p/n: 70-3555-73
This Lower Corner Drip Gutter pair is designed from the original part for superior fitment and function. This drip gutter pair fits to the lower corner at the windshield on the left and right sides.
Cap Seal
p/n: 70-3437-73
This Cap Seal is for the body of the door. Located at the striker on door top for right and left sides. Fully molded rubber with two (2) screw holes.
Door Plug Beltline Extender
p/n: 70-3214-62
This Door Plug Beltline Extender pair is designed from the original part for superior fitment and seal. This piece works on beltline as an extender. Width: 2.0 inches.
Rear Cargo Door Hinge Gaskets Set
p/n: 60-0659-69
This four (4) piece molded Rear Cargo Door Hinge Gasket Set is made to original specifications for proper fitment. Gaskets are fully molded from top quality rubber to ensure durability, fitment and proper seal.
Front Door To A-Pillar Seals
p/n: 70-1460-70
This Front Door To A-Pillar Seal pair installs on the front door at the beltline level to seal against the A-pillar when closed. Sold as a pair for the left and right side.
Front of Vent Window to Door Seals
p/n: 20-2786-62
These Front of Vent Window to Door Seals are installed at the front of the door and next to the door weatherstrip. Sold as a pair.
Door Weatherstrip End Caps
p/n: 70-4659-73
This Door Weatherstrip End Cap pair is designed from the original part for superior fitment and seal. Left and Right End Caps mount on the end of the door weatherstripping, near the quarter windows on convertible models.
Side Mirror Mounting Pads
p/n: 70-5225-45
This Side Mirror Mounting Pad pair is designed from the original part for superior fitment and function. These mirror mounting pads for the Fiero are designed for a precise fit on either the left or right-side mirror and feature an exact 3-hole pattern for proper alignment.
Door Jamb Wire Loom Grommets
p/n: 70-4870-70
These Door Jamb Wire Loom Grommets go between the door and door jam and allow you to run wires or cables through them. They make great complements to power window kits, shaved door kits, or custom stereo installs.
Door Check Link Rod End Stop
p/n: 70-0479-70
End nut, check link (rubber bar with steel bar insert). Three fourths (3/4) inch by three fourths (3/4) inch by two (2) inch threaded five sixteenths (5/16) inch. (For round stop nut, see our #70-0326-70).
Front Of Door To Window Seals
p/n: 20-2838-79
This Front Of Door to Window Seal pair is designed from the original part for superior fitment and seal. This is the door seal that mounts at the front of the door and seals where the door glass comes through.
Lower Door Weatherstrip Retainers
p/n: 20-0393-73
This Lower Door Weatherstrip Retainer pair is designed from the original part for superior fitment, finish and function. A pair of retainers for the lower door weatherstrips that mount on the left and right rocker sills. Does not include door weatherstrips.
Door Striker Plate w/Shims
p/n: 70-5263-70
This reproduction Door Striker Plate pair is designed from the original part for an authentic fit, finish, function and appearance. Zinc plated steel plate for left or right side.
Door Hinge Dust Covers - w/Clips
p/n: 70-5157-70
This LH and RH Door Hinge Dust Cover pair is designed from the original part for superior fitment and function. Filler pieces are die cut from quality 3/32" thick fiber reinforced rubber to authentic original dimensions.
Front of Door To Window Seals
p/n: 70-4765-79
This Front Of Door to Window Seal pair is designed from the original part for superior fitment and seal. This is the door seal that mounts at the front of the door and seals where the door glass comes through.
Inside Door Handle Gaskets
p/n: 70-4811-69
This Inside Door Handle Gasket pair is designed from the original part for an authentic fit, finish, and appearance. Slips onto edge of hole where door handle comes out of the door panel.
Door Weatherstrip
p/n: 70-1650-70
Seal, rear door at rear of window.Length: 1.75 inches. Width: .875 inches.
Door Check Strap
p/n: 20-2106-70
This Door Check Strap is designed from the original part for superior fitment and function. This check strap fits between the body post and door.
Door Bumper
p/n: 40-0235-70
Bumper, door striker plate. Two (2) per door, front and rear.Length: 1.375 inches. Width: .50 inches.
Door Check Link Rod End Stop
p/n: 20-1640-70
This Door Check Link Rod End Stop is designed from the original part for superior fit and function. This door stop fits between the door and body to limit the swing opening of the door preventing overtravel. Door check arm and bumper. Enough for one door.
Door Check Link Rod End Stop
p/n: 70-0326-70
End stop and pad, door check link rod. Rubber with embedded steel plate, five sixteenths (5/16) inch diameter thread. Most models with rod type door checks.
Striker Plate Shims
p/n: 70-5264-70
This Striker Plate Shim Set is designed from the original part for an authentic fit, finish, function and appearance. A stamped steel four (4) piece set to be used behind the striker plate.
Rear View Mirror Mounting Pad
p/n: 70-2791-70
This single Rear View Mirror Mounting Pad To Door gasket is designed from the original part for superior fitment and seal. The gasket is precision die cut to the original specifications. This gasket is one (1) door mounted rear view mirror.
Rear View Mirror Mounting Pad
p/n: 70-5058-45
This single Rear View Mirror Mounting Pad To Door gasket is designed from the original part for superior fitment and function. The gasket is precision die cut to the original specifications. This gasket is for one (1) door mounted rear view mirror.
Black Door Lock Knob
p/n: 30-0251-71
Knob, inside door lock control, flexible rubber, black only.Height: 1.125 inches.
Rear View Mirror Mounting Pad
p/n: 70-3082-70
This single Rear View Mirror Mounting Pad To Door gasket is designed from the original part for superior fitment and seal. The gasket is precision die cut to the original specifications. This gasket is for one (1) door mounted rear view mirror.
Rear View Mirror Mounting Pad
p/n: 70-3083-70
This single Rear View Mirror Mounting Pad To Door gasket is designed from the original part for superior fitment and seal. The gasket is precision die cut to the original specifications. This gasket is for one (1) door mounted rear view mirror.
Rear View Mirror Mounting Pad
p/n: 70-3081-70
This single Rear View Mirror Mounting Pad To Door gasket is designed from the original part for superior fitment and function. The gasket is precision die cut to the original specifications. This gasket is for one (1) door mounted rear view mirror.
Door Check Link Rod End Stop Washer
p/n: 70-0384-70
A quality Door Check Link Rod End Stop Washer for door check mechanism. One and seven-sixteenths (1-7/16") inch diameter by three-sixteenths (3/16") inch thick.
Brown Door Lock Knob
p/n: 70-0660-70
This is the Knob or push button for the inside door lock. The part fits over 1/8" steel rod to door lock. Neutral brown color that may be lacquered with other colors as required. A hard rubber part fits many different vehicles.
Door Inner Panel Drain Hole Plug
p/n: 70-3034-70
This reproduction Door Inner Panel Drain Hole Plug is designed from the original part for an authentic fit and function. Attaches to bottom of door with one (1) carrot retainer on either end.
Door Check Strap Bracket - Adjustable
p/n: 70-4549-70
This adjustable Door Check Strap Bracket is designed from the original part for superior fitment and function. This bracket works with our Door Check Strap #20-2106-70 requiring one bracket per strap.
Brown Door Lock Knob
p/n: 70-0354-70
This is the knob or button for the inside door lock control rod. Neutral brown color rubber, 3/32 inch hole. The part fits many different vehicles.
Door Check Link Rod End Stop
p/n: 70-0325-70
A quality Door Check Link Rod End Stop for rod type door check mechanism. One (1") inch diameter by three-eighths (3/8") inch thick with five-sixteenths (5/16") inch hole.
Door Bottom Drain Hole Seal
p/n: 70-0938-70
This Door Bottom Drain Hole Seal is designed from the original part for superior fitment and seal. This part fits into the lower door on both two (2) and four (4) door models.
Door Bottom Drain Hole Weatherstrip
p/n: 60-0442-70
This Door Bottom Drain Hole Weatherstrip installs on the door bottom and is also used on the tailgate of station wagons. Two (2) required per vehicle. Molded from high-quality EPDM dense rubber.
Door Drain Hole Seal
p/n: 70-1042-70
Weatherstrip, door bottom drain hole.Length: 3.625 inches. Width: .40625 inches.
Door Hinge Bushing - Bronze
p/n: 20-1370-70
This Door Hinge Bushing is designed from the original part for superior fitment and function. An as original bronze bushing that allows for a smooth hinge pin rotation.
Door Vent Window at Beltline Seals
p/n: 20-0100-62
This Door Vent Window at Beltline Seal pair is designed from the original part for superior fitment and seal. These sealing pieces fit at the door vent window adjustment opening at beltline.
Door Striker Plate Pads
p/n: 20-2362-70
This reproduction Door Striker Plate Pad pair is designed from the original part for an authentic fit, finish and appearance.
Door Bumper
p/n: 70-2045-71
This Door to Body Bumper is quality reproduction of the original factory part. Use varies depending upon model and body type. Some models uses four (4) bumpers for front doors and four (4) for rear doors.
Door Striker Plate Pads
p/n: 20-1638-70
This reproduction Door Striker Plate Pad pair is designed from the original part for an authentic fit, finish and function.
Mirror Gasket Paper - Outside Rear View
p/n: 20-3020-45
A Outside Rear View Mirror Paper Gasket copied from the original part for an authentic fit, finish and appearance.
Body Hole Plug
p/n: 20-1040-21
This Body Hole Plug is designed from the original part for superior fitment, finish and function. This plug is made from high quality EPDM dense rubber to provide excellent durability. This body plug covers a sheet metal hole that is one and one half (1-1/2") inch in diameter.
Chrome Molding Mounting Pad
p/n: 60-0727-45
This reproduction Chrome Molding Mounting Pad is designed from the original part for an authentic fit, finish and function. Works for attaching chrome moldings on body. Fits into metal cup retainer. Three fourths (3/4) inch diameter, use as required.
Door Check Arm Bumper
p/n: 20-1639-70
This Door Check Arm Bumper is designed from the original part for superior fitment and function. This rubber with arm slot bumper mounts on the door check arm. Works to cushion the door swing.
Standard Rubber Washer
p/n: 60-0726-45
This Standard Rubber Washer is used for attaching moldings, emblems, and fender guards as required on body.
3/8" Pin Fastener Retainer Set
p/n: 90-3843-90
A four (4) piece set of 3/8" Pin Fastener Retainers. These pin retainers are commonly used to retain door and hardtop roof rail weatherstrips.
7/16" Pin Fastener Retainer Set
p/n: 90-3844-90
A four (4) piece set of 7/16" Pin Fastener Retainers. These pin retainers are commonly used to retain door and hardtop roof rail weatherstrips.