Search for Parts
loading...
Product Filter
Parts by Height
Parts by Width
Parts by Length
Groove Diameter
Bore Diameter
Outside Diameter
Groove Width
Head Height
Head Diameter
Utility

Need Assistance?

We are here to help.

Call 800-447-0849

Filter
Luggage rack grommet

p/n: 70-0287-46

Grommets, luggage rack brace rod through body. Styles with luggage rack arms.

$144.99/pr.
Made to Order Takes 5-7 Days
Rear Panel Weatherstrip

p/n: 70-3651-85

This Rear Panel Weatherstrip seals the front edge of the trunk near the convertible top. Contains fully molded ends with attached bolts for easy and accurate installation. Two (2) strips required to seal upper and lower.

$143.29/ea.
In Stock
Upper Rear Deck Lid Corner Seals

p/n: 70-4145-87

This Upper Rear Deck Lid Corner Seal pair is designed from the original parts for superior fitment and seal. These seals mount directly to the body on the right side and left side at each corner to seal against the upper rear deck lid.

$134.49/pr.
In Stock
Trunk Weatherstrip Corners

p/n: 70-1038-85

These trunk weatherstrip corners are designed from the original part for superior fitment and seal. The seals mount to the front corners of the trunk directly to the body.

$120.49/pr.
Made to Order Takes 5-7 Days
Luggage Rack Grommet

p/n: 17-0021-46

Grommet, luggage rack support arm through body.Length: 2.25 inches. Width: 1.25 inches.

$119.59/pr.
Made to Order Takes 5-7 Days
Luggage Rack Grommet

p/n: 70-0403-46

Grommets, luggage rack arms through sheet metal, special tall type.

$112.19/pr.
In Stock
Trunk Weatherstrip Corners

p/n: 60-0511-85

These trunk weatherstrip corners are designed from the original part for superior fitment and seal. The seals mount to the front corners of the trunk directly to the body.

$96.69/pr.
Made to Order Takes 5-7 Days
Luggage Compartment Door Bumper

p/n: 70-4143-87

This Luggage Compartment Door Bumper is designed from the original part for superior fitment and function. This bumper mounts within the luggage compartment to act as a Stop for the luggage compartment door closure.

$92.49/ea.
In Stock
Luggage Rack Pad

p/n: 20-1469-45

Pads, roof luggage carrier to roof. Sixty three (63) inches long. Set of six (6) pads.

$87.79/set
Ships in 2-3 Weeks
Trunk Bumper

p/n: 70-0352-87

Bumper, trunk lower stop, right and left.

$87.79/pr.
Made to Order Takes 5-7 Days
Rumble Seat Weatherstrip

p/n: 14-0051-87

Weatherstrip or rubber buffer, rumble seat opening notch-out on perimeter of opening near water catch rail. Two (2) used per car.

$87.39/pr.
In Stock
Rear Bumper to Lower Back Panel Splash Shield

p/n: 70-3655-47

This Rear Bumper To Lower Back Panel Splash Shield is designed from the original part for superior fitment and seal. This filler attaches to the rear edge of the lower deck lid panel.

$85.79/ea.
In Stock
Luggage Rack Grommet

p/n: 40-0243-30

Grommet, luggage rack mounts.Length: 3.75 inches.

$83.69/pr.
Made to Order Takes 5-7 Days
Trunk Bumper

p/n: 50-0163-87

Bumper, trunk. Brass core, screw held. Two (2) per car.Length: 1.5 inches. Width: .75 inches.

$80.29/pr.
In Stock
Decklid Lock Bumper

p/n: 40-0361-85

This Decklid Lock Bumper is fully molded and designed from the original part for superior fitment and seal. This bumper is made from high-quality EPDM dense rubber to provide excellent durability.

$77.49/pr.
Made to Order Takes 5-7 Days
Trunk lock striker pad

p/n: 70-0400-87

Cushion, trunk lock striker.

$72.59/ea.
In Stock
Trunk Bumper

p/n: 40-0408-85

Bumper, trunk. Requires two (2) per car.Length: 1.9375 inches.

$70.39/pr.
In Stock
Convertible Top Deck Lid Cover Weatherstrip

p/n: 70-3939-67

This Convertible Top Deck Lid Cover Weatherstrip is designed from the original part for a superior fitment and seal. This rubber seal mounts around the full perimeter of the soft top storage compartment.

$68.99/ea.
Ships in 5-7 Days
Trunk Bumper

p/n: 40-0082-85

Bumper, trunk lid, rubber. Retained by two (2) screws (not included).Width: 2.50 inches. Height: 1.625 inches.

$67.99/pr.
Made to Order Takes 5-7 Days
Golf Bag Door Weatherstrip

p/n: 70-0118-85

This Golf Bag Door Weatherstrip is designed from the original part for superior fitment and seal. This seal mounts directly to the golf bag door.

$66.79/ea.
In Stock
Rumble Seat Lid Bumper Pad

p/n: 70-0278-87

Side pads, rumble seat lid, right and left. Length: 1.125 inches. Width: .6875 inches.

$62.29/pr.
In Stock
Rumble Seat Lid Bumper Pad

p/n: 60-0191-87

Bumper pad, rumble seat lid, upper corners. Compare with our #70-0120-87.Width: 1.0 inches. Height: 1.125 inches.

$61.49/pr.
Made to Order Takes 5-7 Days
Rumble Seat Lid Bumper Pad

p/n: 30-0275-44

Bumpers, rumble seat stop bracket. Self-retaining type as original.Length: 1.1875 inches. Width: .75 inches. Height: .375 inches.

$61.49/pr.
In Stock
Rumble Seat Lid Corner Pad

p/n: 70-0152-87

Pads, rumble seat lid corners, original rounded triangle shape.Length: 1.5 inches. Width: .4375 inches.

$58.49/pr.
Made to Order Takes 5-7 Days
1-3/16" Trunk Bumper

p/n: 33-0203-85

Bumper, trunk lid.

$56.99/pr.
Made to Order Takes 5-7 Days
Convertible Top Decklid Weatherstrip

p/n: 70-3950-67

This Convertible Top Decklid Weatherstrip is designed from the original part for a superior fitment and seal. This rubber seal mounts around the full perimeter of the soft top storage compartment.

$55.59/ea.
Ships in 5-7 Days
Luggage rack pad

p/n: 70-0107-46

Pad, luggage rack to rear apron.

$51.29/pr.
In Stock
Rumble Seat Lid Corner Pad

p/n: 70-0120-87

Pad, rumble seat lid corner, Compare with our #60-0191-87. Length: .75 inches.

$49.69/pr.
In Stock
Rumble Seat Lid Corner Pad

p/n: 70-0048-87

Pads, rumble seat lid corners original style, rounded triangular shape.Width: 1.25 inches.

$48.79/pr.
Made to Order Takes 5-7 Days
Clutch, Brake Pedal or Rumble Seat Pads

p/n: 20-0325-22

This reproduction Pad pair easily screws on the clutch and brake pedal arms for a precise, factory fit. Pads with pyramid design like original. Used as clutch and brake pedal pads for all models. Used as a rumble seat step pad for cars so equipped.

$40.29/pr.
In Stock
Trunk Bumpers - Convertible

p/n: 70-4663-87

This Trunk Bumper pair is a quality reproduction of the original factory part. This rubber bumper attaches to the trunk decklid to support / cushion the trunk lid closure onto the vehicle body.

$39.39/ea.
In Stock
Rumble Seat Lid Bumper Pad

p/n: 40-0297-85

Bumper, rumble seat lid. Sometimes used on trunk. One half (1/2) inch by one (1) inch by one (1) inch. Two (2) per car.Length: 1.0 inches. Width: 1.0 inches.

$34.99/pr.
In Stock
Antenna Mount Pad

p/n: 70-0756-19

Pad, fender mounted antenna.Length: 2.5 inches.

$33.69/ea.
In Stock
Antenna Mount Pad

p/n: 70-0996-19

Pad, antenna mount.

$32.89/ea.
In Stock
Trunk Bumper

p/n: 70-0296-87

T-nut, trunk bumper in gutter at sides, brass core tapped 10-32 thread. Two (2) required per car. For models having partial weatherstrip in gutter of body.

$31.99/ea.
In Stock
Trunk Bumper

p/n: 20-1781-87

Bumpers, deck lid.

$31.49/pr.
Ships in 2-3 Weeks
Rumble Seat Lid Bumper Pad

p/n: 13-0006-87

Pad, rumble seat lid bumper, one and three sixteenths (1-3/16) inch square.Width: 1.1875 inches. Height: .5625 inches.

$29.39/ea.
Made to Order Takes 5-7 Days
Trunk Bumper

p/n: 20-1395-87

Bumper, rear body panel to trunk lid.

$29.39/pr.
Ships in 2-3 Weeks
Trunk Bumper

p/n: 70-1659-87

Bumper, trunk lid.Length: 1.50 inches. Width: 1.0 inches.

$28.79/ea.
In Stock
Taillight bumper

p/n: 20-2633-87

Bumper, rear lamp bracket. Type w/Tire Carrier.

$24.59/pr.
Ships in 2-3 Weeks
Trunk Decklid Bumper Stop

p/n: 82-0160-87

This Trunk-Decklid Bumper Stop is a quality reproduction of the original factory part. This adjustable rubber bumper attaches to the vehicle body to support / cushion the trunk lid closure.

$23.89/ea.
Ships in 5-7 Days
Rumble Seat Lid Bumper Pad

p/n: 20-2133-87

Stops, rumble lid. Lower. Installs on floor.

$22.99/pr.
Ships in 2-3 Weeks
Decklid Top Cover Weatherstrip

p/n: 70-3922-67

This Decklid Top Cover Weatherstrip is designed from the original part for a superior fitment and seal. This weatherstrips mounts around the full perimeter of the soft top storage compartment.

$22.69/ea.
Allow 1-2 Weeks Ships Separately
Trunk Bumper

p/n: 50-0546-87

Bumper, trunk. On side near hinge end. Made with metal core.Width: 1.625 inches. Height: 1.0 inches.

$22.39/ea.
In Stock
Trunk Bumper

p/n: 70-3378-87

Bumper, trunk lid. Includes metal core and screw.

$16.29/ea.
In Stock
Trunk Deck Lid Rubber Bumpers

p/n: 70-2601-42

This Trunk Deck Lid Rubber Bumper pair is designed from the original part for superior fitment, finish and function. The correct OE style trunk deck lid rubber bumpers stoppers. Two required per car.

$14.99/pr.
In Stock
Trunk Hinge Gaskets - Convertible

p/n: 70-4657-87

This Trunk Hinge Gasket pair is designed from the original part for superior fitment, finish and function. On Convertibles the gasket pair install between the plastic hinge cover and the trunk lid on the exterior (near the rear window).

$14.69/pr.
Ships in 1-3 Weeks
2-1/4" Trunk Floor Pan Plug

p/n: 70-2598-87

This Trunk Floor Pan Plug is designed from the original part for superior fitment and seal. This plug is made from high quality EPDM dense rubber to provide excellent durability.

$14.49/ea.
In Stock
1-13/16" Trunk Floor Pan Plug

p/n: 70-2599-87

This Trunk Floor Pan Plug is designed from the original part for superior fitment and seal. This plug is made from high quality EPDM dense rubber to provide excellent durability.

$13.19/ea.
In Stock
Trunk Bumper

p/n: 20-1693-87

Bumpers, deck lid.

$12.89/pr.
Ships in 2-3 Weeks
Trunk Bumper

p/n: 20-2132-87

Bumpers, trunk or rumble seat lid. Upper.

$12.89/pr.
Ships in 2-3 Weeks
Trunk Bumper

p/n: 20-1218-87

Bumpers, trunk lid.

$12.89/pr.
Ships in 2-3 Weeks
Trunk Bumper

p/n: 20-2387-87

Bumpers, deck lid.

$12.89/pr.
Ships in 2-3 Weeks
Trunk Decklid Adjustable Bumper

p/n: 70-2708-87

This Trunk Decklid Bumper is a quality reproduction of the original factory part. This adjustable rubber bumper attaches to the vehicle body to support / cushion the trunk lid closure. Screws into trunk. Two (2) required per car.

$12.39/ea.
In Stock
Trunk Bumper

p/n: 34-0399-87

Bumper, trunk opening on lid. Metal core, as original, screw held. Two (2) required per car.

$11.79/ea.
In Stock
Trunk Bumper

p/n: 20-2871-87

Bumpers, trunk lid.

$11.29/pr.
In Stock
Trunk Bumper

p/n: 20-2870-87

Bumpers, trunk lid.

$11.29/pr.
In Stock
Brown Trunk Bumper

p/n: 30-0299-89

Cap for covering fender bolt, trunk interior. Brown rubber.Height: .8125 inches.

$10.79/ea.
In Stock
Trunk Decklid Bumpers

p/n: 70-2044-87

This Trunk Decklid Bumper pair is designed from the original part for superior fitment, finish and function. These rubber bumpers attach to the trunk decklid to support / cushion lid closure.

$10.39/pr.
In Stock
Trunk Bumper

p/n: 70-2741-87

Bumpers, adjustable trunk. Screws into trunk. Two (2) required per car.

$9.99/ea.
In Stock
Trunk - Decklid Bumper

p/n: 70-3528-87

This Trunk-Decklid Bumper is a quality reproduction of the original factory part. This adjustable rubber bumper attaches to the vehicle body to support / cushion the trunk lid closure.

$9.69/ea.
In Stock
License Plate Bumper

p/n: 20-0233-45

Bumper, rear license plate rubber. One (1) required per car.

$8.59/ea.
Ships in 2-3 Weeks
Tailgate Bumper

p/n: 70-2618-87

This Tailgate Bumper is quality reproduction of the original factory part. This rubber bumper attaches to the vehicle body to support / cushion the tailgate closure. Usually requires two (2) bumpers each per vehicle.

$8.59/ea.
In Stock
Trunk Bumper

p/n: 70-2612-87

This Trunk Bumper is quality reproduction of the original factory part. This rubber bumper attaches to the rear body to support / cushion the Trunk / Decklid closure. Usually requires two (2) bumpers each per vehicle.

$8.59/ea.
In Stock
Trunk torsion bar anti-rattle

p/n: 20-1394-87

Anti-rattler, trunk torsion bar.

$8.59/ea.
Ships in 2-3 Weeks
Trunk torsion bar anti-rattle

p/n: 20-2873-87

Pads, trunk tension rods anti rattler.

$8.59/ea.
Ships in 2-3 Weeks
Tailgate Latch Striker Bumper

p/n: 70-1911-87

This Tailgate Latch Striker Bumper is a quality reproduction of the original factory part. This rubber bumper attaches to the station wagon tailgate to cushion its closure. Usually requires two (2) bumpers each per vehicle.

$7.59/ea.
In Stock
Trunk Bumper

p/n: 70-2607-87

This Trunk Bumper is quality reproduction of the original factory part. This rubber bumper attaches to the rear body to support / cushion the Trunk / Decklid closure. Usually requires two (2) bumpers each per vehicle.

$7.59/ea.
In Stock
7/8" Trunk Floor Pan Plug

p/n: 35-0402-87

This Trunk Floor Pan Plug is designed for floor construction holes and rest pad for the spare wheel area. Six (6) to eight (8) per car, as required.

$6.79/ea.
In Stock
1/2" Trunk Floor Pan Plug

p/n: 35-0070-87

This Trunk Floor Pan Plug is fully molded and designed from the original part for superior fitment and seal. This plug is made from high-quality EPDM dense rubber to provide excellent durability.

$5.19/ea.
In Stock
1/4" Trunk Bumper

p/n: 33-0293-87

This 7/8" Trunk Bumper is a quality reproduction of the original factory part. Self-retaining bumper is manufactured to OEM specifications to install for an authentic fit, finish, and function.

$4.59/ea.
In Stock
3/16" Trunk Bumper

p/n: 33-0990-87

This Trunk Bumper is a quality reproduction of the original factory part. Self-retaining bumper is manufactured to OEM specifications to install for an authentic fit, finish, and function.

$4.39/ea.
In Stock
Hood or Trunk Bumper

p/n: 34-0203-42

This Bumper is designed to be used for the trunk or hood. The bumper is molded with clearance for the attachment screw (not included).

$4.39/ea.
In Stock
Chrome Molding Washer

p/n: 60-0727-45

Washer, for attaching chrome moldings on body. Fits into metal cup retainer. Three fourths (3/4) inch diameter, use as required.

$3.99/ea.
In Stock
1" Wiring Grommet

p/n: 32-0401-45

This Wiring Grommet is fully molded and designed from the original part for superior fitment and seal. Designed to run the license light wire through the trunk inner panel.

$3.39/ea.
In Stock
1/4" Trunk Bumper

p/n: 33-0350-87

This 7/8" Trunk Bumper is a quality reproduction of the original factory part. Bumper fits to the rear compartment lid, lower corners on lid. Two (2) per car. Manufactured to OEM specifications to install for an authentic fit, finish, and function.

$3.19/ea.
In Stock
1/4" Multi-Purpose Bumper

p/n: 60-0734-71

This 9/16" Multi-Purpose Bumper is a quality reproduction of the original factory part. This bumper can also be used Door Lock Striker Plate, Window Glass Stops and License Plate.

$1.89/ea.
In Stock
Standard rubber washer

p/n: 60-0726-45

Washer, for attaching moldings, emblems, and fender guards as required on body.

$1.89/ea.
In Stock