Search for Parts
loading...

Trunk Parts, Other

These are general parts categories. To narrow your search, please use the "Search for Parts" box.
Luggage rack grommet

p/n: 70-0287-46

Grommets, luggage rack brace rod through body. Styles with luggage rack arms.

$109.90/pr.
Made to Order Takes 1-2 Days
Back Panel Weatherstrip

p/n: 70-3651-85

This upper back panel weatherstrip seals the front edge of the trunk near the convertible top. Contains fully molded ends with attached bolts for easy and accurate installation. Two (2) strips required to seal upper and lower.

$108.70/ea.
In Stock
Trunk Weatherstrip Corners

p/n: 70-1038-85

These trunk weatherstrip corners are designed from the original part for superior fitment and seal. The seals mount to the front corners of the trunk directly to the body.

$87.90/pr.
Made to Order Takes 1-2 Days
Luggage rack grommet

p/n: 17-0021-46

Grommet, luggage rack support arm through body.Length: 2.25 inches. Width: 1.25 inches.

$87.20/pr.
Made to Order Takes 1-2 Days
Luggage Rack Grommet

p/n: 70-0403-46

Grommets, luggage rack arms through sheet metal, special tall type.

$81.60/pr.
Made to Order Takes 1-2 Days
Trunk Weatherstrip Corners

p/n: 60-0511-85

These trunk weatherstrip corners are designed from the original part for superior fitment and seal. The seals mount to the front corners of the trunk directly to the body.

$70.40/pr.
In Stock
Golf Bag Door Weatherstrip

p/n: 30-0164-87

These golf bag door weatherstrips are designed from the original part for superior fitment and seal. The seals mount around the full perimeter of both golf bag doors.

$69.50/pr.
In Stock
Luggage rack pad

p/n: 20-1469-45

Pads, roof luggage carrier to roof. Sixty three (63) inches long. Set of six (6) pads.

$63.80/set
Ships in 3-4 Days
Trunk bumper

p/n: 70-0352-87

Bumper, trunk lower stop, right and left.

$63.80/pr.
Made to Order Takes 1-2 Days
Rumbleseat Weatherstrip

p/n: 14-0051-87

Weatherstrip or rubber buffer, rumbleseat opening notch-out on perimeter of opening near water catch rail. Two (2) used per car.

$63.60/pr.
In Stock
Luggage rack grommet

p/n: 40-0243-30

Grommet, luggage rack mounts.Length: 3.75 inches.

$60.90/pr.
Made to Order Takes 1-2 Days
Trunk bumper

p/n: 50-0163-87

Bumper, trunk. Brass core, screw held. Two (2) per car.Length: 1.5 inches. Width: .75 inches.

$58.30/pr.
In Stock
Trunk bumper

p/n: 40-0361-85

Bumper, trunk lock. Two (2) per car.Length: 2.375 inches. Width: 1.75 inches.

$56.30/pr.
In Stock
Trunk lock striker pad

p/n: 70-0400-87

Cushion, trunk lock striker.

$52.70/ea.
In Stock
Trunk bumper

p/n: 40-0408-85

Bumper, trunk. Requires two (2) per car.Length: 1.9375 inches.

$51.20/pr.
In Stock
Trunk bumper

p/n: 40-0082-85

Bumper, trunk lid, rubber. Retained by two (2) screws (not included).Width: 2.50 inches. Height: 1.625 inches.

$47.60/pr.
Made to Order Takes 1-2 Days
Golf Bag Door Weatherstrip

p/n: 70-0118-85

This golf bag door weatherstrip is designed from the original part for superior fitment and seal. This seal mounts directly to the golf bag door.

$45.30/ea.
In Stock
Rumbleseat lid bumper pad

p/n: 70-0278-87

Side pads, rumbleseat lid, right and left.Length: 1.125 inches. Width: .6875 inches.

$42.30/pr.
In Stock
Rumbleseat lid bumper pad

p/n: 30-0275-44

Bumpers, rumbleseat stop bracket. Self retaining type as original.Length: 1.1875 inches. Width: .75 inches. Height: .375 inches.

$41.80/pr.
In Stock
Rumbleseat lid bumper pad

p/n: 60-0191-87

Bumper pad, rumbleseat lid, upper corners. Compare with our #70-0120-87.Width: 1.0 inches. Height: 1.125 inches.

$41.80/pr.
In Stock
Rumbleseat lid corner pad

p/n: 70-0152-87

Pads, rumbleseat lid corners, original rounded triangle shape.Length: 1.5 inches. Width: .4375 inches.

$39.60/pr.
In Stock
Trunk bumper

p/n: 33-0203-85

Bumper, trunk lid.

$38.70/pr.
In Stock
Decklid Top Cover Weatherstrip

p/n: 70-3939-67

Decklid Top Cover Weatherstrip - This decklid top storage cover weatherstrip is designed from the original part for a superior fitment and seal. This rubber seal mounts around the full perimeter of the soft top storage compartment. This seal is made from top quality rubber to ensure long durability and a proper seal.

$37.70/ea.
Ships in 3-4 Days
Decklid Top Cover Weatherstrip

p/n: 70-3950-67

Decklid Top Cover Weatherstrip - This decklid top storage cover weatherstrip is designed from the original part for a superior fitment and seal. This rubber seal mounts around the full perimeter of the soft top storage compartment. This seal is made from top quality rubber to ensure long durability and a proper seal.

$37.70/ea.
Ships in 3-4 Days
Luggage rack pad

p/n: 70-0107-46

Pad, luggage rack to rear apron.

$34.70/pr.
Made to Order Takes 1-2 Days
Rumbleseat lid corner pad

p/n: 70-0120-87

Pad, rumbleseat lid corner, Compare with our #60-0191-87.Length: .75 inches.

$33.60/pr.
In Stock
Rumbleseat lid corner pad

p/n: 70-0048-87

Pads, rumbleseat lid corners original style, rounded triangular shape.Width: 1.25 inches.

$33.00/pr.
Made to Order Takes 1-2 Days
Brake clutch or rumbleseat pad

p/n: 20-0325-22

Pad with pyramid design like original. Used a clutch and brake pedal pad for all models, and as a rumble-seat step pad for cars so equipped.

$27.20/pr.
Ships in 3-4 Days
Rumbleseat lid bumper pad

p/n: 40-0297-85

Bumper, rumbleseat lid. Sometimes used on trunk. One half (1/2) inch by one (1) inch by one (1) inch. Two (2) per car.Length: 1.0 inches. Width: 1.0 inches.

$23.50/pr.
In Stock
Antenna mount pad

p/n: 70-0756-19

Pad, fender mounted antenna.Length: 2.5 inches.

$22.70/ea.
In Stock
Antenna mount pad

p/n: 70-0996-19

Pad, antenna mount.

$22.00/ea.
In Stock
Trunk bumper

p/n: 70-0296-87

T-nut, trunk bumper in gutter at sides, brass core tapped 10-32 thread. Two (2) required per car. For models having partial weatherstrip in gutter of body.

$21.50/ea.
In Stock
Trunk bumper

p/n: 20-1781-87

Bumpers, deck lid.

$21.30/pr.
Ships in 3-4 Days
Trunk bumper

p/n: 70-2044-87

Bumper, trunk lid.Length: 1.0 inches. Width: .5625 inches. Height: .375 inches.

$20.60/pr.
In Stock
Trunk bumper

p/n: 82-0160-87

Bumper, trunk stop.

$19.80/ea.
In Stock
Rumbleseat lid bumper pad

p/n: 13-0006-87

Pad, rumbleseat lid bumper, one and three sixteenths (1-3/16) inch square.Width: 1.1875 inches. Height: .5625 inches.

$19.60/ea.
Made to Order Takes 1-2 Days
Trunk bumper

p/n: 20-1395-87

Bumper, rear body panel to trunk lid.

$19.60/pr.
Ships in 3-4 Days
Trunk bumper

p/n: 70-1659-87

Bumper, trunk lid.Length: 1.50 inches. Width: 1.0 inches.

$19.30/ea.
In Stock
Taillight bumper

p/n: 20-2633-87

Bumper, rear lamp bracket. Type w/Tire Carrier.

$16.40/pr.
Ships in 3-4 Days
Rumbleseat lid bumper pad

p/n: 20-2133-87

Stops, rumble lid. Lower. Installs on floor.

$15.50/pr.
Ships in 3-4 Days
Decklid Top Cover Weatherstrip

p/n: 70-3922-67

Decklid Top Storage Cover Weatherstrip - This decklid top storage cover weatherstrip is designed from the original part for a superior fitment and seal. This seal mounts around the full perimeter of the soft top storage compartment. This seal is made from top quality rubber to ensure long durability and a proper seal.

$15.20/ea.
Ships in 3-4 Days
Trunk bumper

p/n: 50-0546-87

Bumper, trunk. On side near hinge end. Made with metal core.Width: 1.625 inches. Height: 1.0 inches.

$14.90/ea.
In Stock
Trunk bumper

p/n: 70-3378-87

Bumper, trunk lid. Includes metal core and screw.

$10.70/ea.
In Stock
Trunk Floor Pan Plug

p/n: 70-2598-87

This Trunk Floor Pan Plug is designed from the original part for superior fitment and seal.

$9.50/ea.
In Stock
Trunk Floor Pan Plug

p/n: 70-2599-87

This Trunk Floor Pan Plug is designed from the original part for superior fitment and seal.

$8.50/ea.
In Stock
Trunk bumper

p/n: 20-2387-87

Bumpers, deck lid.

$8.40/pr.
In Stock
Trunk bumper

p/n: 20-1693-87

Bumpers, deck lid.

$8.40/pr.
In Stock
Trunk bumper

p/n: 20-2132-87

Bumpers, trunk or rumble seat lid. Upper.

$8.40/pr.
In Stock
Trunk bumper

p/n: 20-1218-87

Bumpers, trunk lid.

$8.40/pr.
Ships in 3-4 Days
Trunk bumper

p/n: 70-2708-87

Bumpers, adjustable trunk. Screws into trunk. Two (2) required per car.

$8.10/ea.
In Stock
Trunk bumper

p/n: 34-0399-87

Bumper, trunk opening on lid. Metal core, as original, screw held. Two (2) required per car.

$7.60/ea.
In Stock
Trunk bumper

p/n: 20-2870-87

Bumpers, trunk lid.

$7.30/pr.
In Stock
Trunk bumper

p/n: 20-2871-87

Bumpers, trunk lid.

$7.30/pr.
In Stock
Brown trunk bumper

p/n: 30-0299-89

Cap for covering fender bolt, trunk interior. Brown rubber.Height: .8125 inches.

$6.90/ea.
In Stock
Trunk Bumper

p/n: 70-2741-87

Bumpers, adjustable trunk. Screws into trunk. Two (2) required per car.

$6.50/ea.
In Stock
Trunk lid bumper

p/n: 70-3528-87

Bumper, trunk lid adjusting. Bumper screws into the decklid. Requires 2 per car.

$6.10/ea.
In Stock
Bumper, tailgate

p/n: 70-2618-87

Bumper, tailgate

$5.60/ea.
In Stock
License plate bumper

p/n: 20-0233-45

Bumper, rear license plate rubber. One (1) required per car.

$5.60/ea.
Ships in 3-4 Days
Trunk torsion bar anti-rattle

p/n: 20-2873-87

Pads, trunk tension rods anti rattler.

$5.60/ea.
Ships in 5-7 Days
Trunk torsion bar anti-rattle

p/n: 20-1394-87

Anti-rattler, trunk torsion bar.

$5.60/ea.
Ships in 3-4 Days
Bumper, decklid

p/n: 70-2612-87

Bumper, decklid

$5.40/ea.
In Stock
Bumper, decklid

p/n: 70-2607-87

Bumper, decklid

$4.70/ea.
In Stock
Trunk bumper

p/n: 70-1911-87

Bumper, tailgate and trunk latch striker.Qty Required:2 Width: .875 inches. Height: .625 inches.

$4.70/ea.
In Stock
Trunk floor pan plug

p/n: 35-0402-87

Plug, trunk floor pan construction holes, also rest pad for spare wheel area.

$4.20/ea.
In Stock
Trunk floor pan plug

p/n: 35-0070-87

Plug, trunk and floor pan drain hole. Buick 1950-65 Plug, trunk and floor pan drain hole.

$3.20/ea.
In Stock
Trunk bumper

p/n: 33-0293-87

Bumper, trunk and tailgate lid bumper support, on lid.

$2.80/ea.
In Stock
Trunk bumper

p/n: 33-0990-87

Bumper, trunk lid rest. Self retaining.

$2.60/ea.
In Stock
Trunk or hood bumper

p/n: 34-0203-42

Bumper, trunk or hood. Molded with clearance for screw. Used for: Buick 1942-50 Bumper for trunk. Chevrolet 1949-55 Bumper for rear hood corners on cowl. Chevrolet 1949-50 Bumper for trunk. Oldsmobile 1938 Bumper under hood corner on radi

$2.60/ea.
In Stock
Chrome molding washer

p/n: 60-0727-45

Washer, for attaching chrome moldings on body. Fits into metal cup retainer. Three fourths (3/4) inch diameter, use as required.

$2.10/ea.
In Stock
Wiring grommet

p/n: 32-0401-45

Grommet, license light wire through trunk inner panel. Sheet Metal Hole: 1" Center Hole: 3/8" Outside Diameter: 1-1/4" Slot Width: 1/16"

$1.90/ea.
In Stock
Trunk bumper

p/n: 33-0350-87

Bumper, rear compartment lid, lower corners on lid.

$1.80/ea.
In Stock
License plate bumper

p/n: 60-0734-71

Bumper, door or license frame to trunk.

$0.90/ea.
In Stock
Standard rubber washer

p/n: 60-0726-45

Washer, for attaching moldings, emblems, and fender guards as required on body.

$0.90/ea.
In Stock