Search Results

645 items found matching Plymouth
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Firewall grommet

p/n: 32-0224-21

Grommet, utility, for firewall. Sheet Metal Hole: 7/8" Center Hole: 5/8" Outside Diameter: 1-1/8" Slot Width: 1/16"

$1.19/ea.
In Stock
Hood Bumper

p/n: 33-0395-42

Bumper, hood to fender ledge. Up to ten (10) used per car.

$2.59/ea.
In Stock
Standard Bumper

p/n: 33-0136-42

Bumper, standard. See detail page for specific usage.

$2.79/ea.
In Stock
Standard bumper

p/n: 33-0496-71

Bumper, used at door opening at upper corner, license plate, and/or fuel filler door. Self-retaining type.

$2.89/ea.
In Stock
Glovebox bumper

p/n: 40-0501-88

Bumper, glovebox door.Note: not used on Airflow models.

$3.29/ea.
In Stock
Inner side window bumper

p/n: 70-0775-62

Bumper, inner side window garnish molding. One (1) per door.Length: 1.0 inches. Width: .3125 inches. Height: .25 inches.

$3.29/ea.
In Stock
Shock absorber bushing

p/n: 20-1274-32

Bushing, shock absorber link. May be used for front or rear spring.Chrysler 1951-54 Bushing, rubber, shock absorber link.

$3.69/ea.
In Stock
Side window weatherstrip

p/n: 70-0064-57

Seal, lower side window. Fastens to inner face of door to seal against outer side of glass. Also used as weatherstrip on crank-up windshield tops.

$3.79/ft.
In Stock
Hood bumper

p/n: 33-0169-42

Pad, hood, stem bumper type.

$3.89/ea.
In Stock
Windshield weatherstrip

p/n: 19-0024-52

Weatherstrip, windshield, largest type of T-rubber, one and one half (1-1/2) inch high.

$3.89/ft.
In Stock
Windshield weatherstrip

p/n: 70-1163-52

Weatherstrip, T-rubber, one (1) inch long with one quarter (1/4) inch top. Numerous applications for windshields.Width: 1.0 inches.

$3.89/ft.
In Stock
Shock absorber bushing

p/n: 70-0547-32

Bushing, shock absorber mounting. Double cone style, rear. Five eighths (5/8) inch hole, one and one sixteenths (1-3/16) inch outside diameter, three fourth (3/4) inch thick.

$3.89/ea.
In Stock
Sash Channel Filler, 1/32" Cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$4.39/ft.
In Stock
Side mount grommet

p/n: 32-0365-37

Grommet, side tire carrier support arm bracket. Sheet Metal Hole: 1-5/32" Center Hole: 5/8" Outside Diameter: 1-9/16" Slot Width: 3/32"

$4.39/ea.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$4.39/ft.
In Stock
Hood bumper

p/n: 70-1962-42

Bumper, hood to fender side. Four (4) required per car.

$4.59/ea.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.69/ft.
In Stock
Hood Corner Bumper

p/n: 33-0117-42

Hood corner pad

$4.99/ea.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$5.19/ft.
In Stock
Trunk Weatherstrip

p/n: 70-0231-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose.

$5.19/ft.
In Stock
Hood Bumper

p/n: 70-1607-42

Bumper, hood. Use as required. Width: .6875 inches. Height: .625 inches.

$5.59/ea.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0331-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.79/ft.
In Stock
Door weatherstrip

p/n: 70-0219-73

Weatherstrip, door edge, constant section on some models. Five eighths (5/8) inch by (5/8) inch cross-section, high grade, fine grain sponge rubber.

$5.79/ft.
In Stock
Side Window Upper Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 40-0280-57

Side window weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.79/ft.
In Stock
Window weatherstrip

p/n: 70-1191-52

Gasket, window, for models without chrome reveal molding.

$5.89/ft.
In Stock
Channel filler weatherstrip

p/n: 70-0241-57

Weatherstrip, side window, double-lip seal type, used as filler for one fourth (1/4) inch glass in metal carrier channel.Width: .375 inches. Height: .

$5.89/ft.
In Stock
Channel filler weatherstrip

p/n: 30-0154-57

Filler, for glass channel for convertible type windows with metal frame around one fourth (1/4) inch glass.Width: .4375 inches. Height: .50 inches.

$5.89/ft.
In Stock
Hood Bumper

p/n: 70-1814-42

This Hood Bumper is quality reproduction of the original factory part.

$5.89/ea.
In Stock
Windshield Weatherstrip

p/n: 70-1190-52

Channel, windshield, for windows without chrome reveal molding. (With 2 piece windshield, select gasket for division bar).

$5.99/ft.
In Stock
Window weatherstrip

p/n: 30-0044-77

Channel, back window. Extra light, plain channel for one fourth (1/4") inch glass. Three thirty seconds (3/32") inch thick wall.Width: .4375 inches.

$5.99/ft.
In Stock
Side window bumper

p/n: 40-0116-70

Pad, side window anti-rattle. Five sixteenths (5/16) inch by one (1) inch for three sixteenths (3/16) inch by three fourths (3/4) inch slot in sheet metal.

$5.99/ea.
In Stock
Hood To Fender Bumper

p/n: 40-0503-42

This Hood to Fender Bumper is quality reproduction of the original factory part. This rubber bumper attaches to the front fender to support / cushion the hood closure. Usually requires up to ten (10) bumpers per vehicle.

$5.99/ea.
In Stock
Peel-N-Stick Door Weatherstrip

p/n: 70-0331-WT

Door edge weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Makes for an easier installation of door weatherstripping. Also excellent for use in many different applications and on many different vehicle models.

$5.99/ft.
In Stock
Peel-N-Stick Door Edge Weatherstrip

p/n: 70-0390-WT

Door edge weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Makes for an easier installation of door weatherstripping. Also excellent for use in many different applications and on many different vehicle models.

$6.19/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$6.39/ft.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0390-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$6.39/ft.
In Stock
Channel filler weatherstrip

p/n: 70-0075-57

Channel pad, window carrier, incorporating weatherstrip. Used for some side window lower channel.Width: .375 inches. Height: .6875 inches.

$6.39/ft.
In Stock
Shock absorber arm bushing

p/n: 60-0106-32

Bushing, shock absorber arm link.

$6.49/ea.
In Stock
Roof Rail Weatherstrip

p/n: 70-1171-99

Weatherstrip, side roof rail. Thirteen-sixteen inches (13/16") wide. Fits into metal channel retainer.

$6.49/ft.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 30-0356-WT

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.

$6.69/ft.
In Stock
Trunk Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 40-0479-85

Trunk weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$6.79/ft.
In Stock
Hood To Cowl Weatherstrip

p/n: 40-0475-42

Seal, hood to cowl and also used as radiator seal.

$6.79/ft.
In Stock
Door weatherstrip

p/n: 40-0487-73

Weatherstrip, door bottom.Width: 1.375 inches.

$6.79/ft.
In Stock
Dense Rubber Extrusion

p/n: 40-0053-99

Windshield, rear window and rear fixed quarter window weatherstrip. Typically used on cars without chrome reveal molding or others where reveal molding lays under the rubber lip. Vehicles typically need 12 foot for windshield, and 8 foot for either the re

$6.79/ft.
In Stock
Hood bumper

p/n: 70-1755-42

Bumper, hood to fender.Length: 1.0 inches. Width: .875 inches.

$6.89/ea.
In Stock
Trunk Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 30-0356-85

Trunk weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$6.89/ft.
In Stock
Door Weatherstrip

p/n: 70-1292-73

Weatherstrip, door opening, bottom. Approximately eight (8) foot for two (2) door and ten (10) foot for four (4) door models.

$6.89/ft.
In Stock
Glass rear stop bumper

p/n: 70-3624-62

Front door glass rear stop bumper.

$6.89/ea.
In Stock
Glass up stop bumper

p/n: 70-3623-62

Front door glass up stop bumper. For models w/out power vent windows. Use two (2) or four (4) per vehicle. Refer to your vehicle to see how many are required.

$6.89/ea.
In Stock
Side roof rail weatherstrip

p/n: 70-0155-65

Weatherstrip, convertible roof rail. Compare sketch to your original.

$6.99/ft.
In Stock
Door Bumper

p/n: 70-2045-71

This Door to Body Bumper is quality reproduction of the original factory part. Use varies depending upon model and body type. Some models uses four (4) bumpers for front doors and four (4) for rear doors.

$6.99/ea.
In Stock
Rear spring thrust washer

p/n: 40-0525-32

Thrust washer, rear spring. "Silent Block". Three sixteenths (3/16) inch thick. One (1) inch by one and three fourths (1-3/4) inch.

$6.99/ea.
In Stock
Run channel mohair liner

p/n: 70-2863-58

Liner, mohair. Liner with a rubber backing. Apply with adhesive to division bars and channels. Helps reline guide bars on lock side of hardtops and convertibles.

$6.99/ft.
In Stock
Door weatherstrip

p/n: 70-1448-73

Weatherstrip, door sill. Order approximately eight (8) foot for two (2) door and ten (10) foot for four (4) door models.

$6.99/ft.
In Stock
Rear spring thrust washer

p/n: 40-0526-32

Thrust washer, rear spring. "Silent Block". Three sixteenths (3/16) inch thick. Seven eighths (7/8) inch by one and five eighths (1-5/8).

$7.39/ea.
In Stock
Side mount grommet

p/n: 32-0364-37

Grommet, side tire carrier support arm bracket. Sheet Metal Hole: 29/32" Center Hole: 5/8" Outside Diameter: 1-1/4" Slot Width: 3/32"

$7.89/ea.
In Stock
Frame hole plug

p/n: 35-0166-44

Plug, for holes in right hand frame rail when car is left hand drive. (Frames were punched for both right hand and left hand drive).

$7.99/ea.
In Stock
Spring shackle bushing

p/n: 40-0183-32

Bushing, spring and shackle, front and rear leaf springs. Eight (8) or twelve (12) required per car.Length: 1.25 inches. Height: 1.25 inches.

$7.99/ea.
In Stock
Door bumper

p/n: 34-0025-42

Bumper, front and rear body hinge pillar, one (1) inch diameter by one fourth (1/4) inch thick, held by screw, steel core. Auxiliary, used only where needed to prevent door rattle.Note: also used on 1942-50 Packards with Clipper styling near t

$8.59/ea.
In Stock
Fabric hood lacing

p/n: 60-0578-42

Lacing, hood, fabric, webbing anti-squeak. With hollow center to receive wire if needed, or fasten with rivets if so found originally. Excellent quality. Seven eighths (7/8) inch by one eighths (1/8) inch thick.

$8.79/ft.
In Stock
Dense Rubber Extrusion

p/n: 40-0054-99

Windshield, rear window and rear fixed quarter window weatherstrip. Used on cars with chrome reveal molding where the reveal molding lays over the pinchweld seal. Vehicles typically need 12 foot for windshield, and 8 foot for either the rear window and q

$8.79/ft.
In Stock
Fabric hood lacing

p/n: 70-2221-42

Lacing, hood, fabric, webbing anti-squeak. DOES NOT have hollow center. Fasten with rivets if so found originally. Excellent quality.

$8.79/ft.
In Stock
Spare wheel carrier grommet

p/n: 32-0253-37

Grommet, rear spare wheel carrier mounting bracket. Sheet Metal Hole: 1-1/16" Center Hole: 5/8" Outside Diameter: 2-1/16" Slot Width: 3/32"

$8.99/ea.
In Stock
Windshield bumper

p/n: 40-0366-52

Bumper, windshield. Two (2) per car.Height: .75 inches.

$9.29/ea.
In Stock
Door Bumper

p/n: 40-0154-70

Bumper, door side. One and one fourth (1-1/4) inch long by one (1) inch wide. Similar to our #40-0010-70, but different workface. Length: 1.0 inches.

$9.29/ea.
In Stock
Door opening step grommet

p/n: 40-0125-49

Grommet, door sill mat retainer at lower door opening. All sill plates with metal stud retainer. (Included in our #40-0542-49 set).

$9.79/ea.
In Stock
Roof insert seal

p/n: 20-0102-45

Seal, top insert for closed cars without turret top. Fits groove between cloth top center panel and steel surround.

$10.59/ft.
In Stock
Body mounting pad

p/n: 40-0324-48

Cushion, used as either a body mounting pad or for all body bolt nuts, below brackets. Fully molded rubber. Two inch (2") outside diameter by one half inch (1/2") inside hole diameter by three eighths inch (3/8") height.

$10.79/ea.
In Stock
Battery cable grommet

p/n: 40-0333-21

Grommet, battery hot cable through frame. Three fourths (3/4) inch inside diameter for one and three sixteenths (1-3/16) inch hole through frame.

$11.19/ea.
Made to Order Takes 1-2 Days
Hood bumper

p/n: 60-0542-42

Bumper, hood to fender ledge. Four (4) piece set.

$11.39/set
In Stock
Door bumper

p/n: 40-0010-70

Pad, door jamb, fully detailed. One and one eighth (1-1/8) inch long, one and one fourth (1-1/4) inch wide.Length: 1.125 inches. Width: 1.25 inches.

$11.49/ea.
In Stock
Door handle gasket

p/n: 40-0133-70

Pad, door handle escutcheon. Two and three fourths (2-3/4) inch by one and one fourth (1-1/4) inch.Width: 2.75 inches. Height: 1.25 inches.

$11.69/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$11.79/sqf
In Stock
Door and trunk handle gasket

p/n: 40-0132-70

Pad, door handle escutcheon. Two and five sixteenths (2-5/16) inch by one and seven sixteenths (1-7/16) inch.

$11.89/ea.
In Stock
Body mounting pad

p/n: 40-0230-48

Pad, body mounting, lower. Fully molded rubber. One and eleven sixteenths inch (1 11/16") outside diameter by nine sixteenths inch (9/16") inside hole diameter by one half inch (1/2") height.

$11.99/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.99/ea.
In Stock
Body mounting pad

p/n: 40-0234-48

Pad, body mounting. Used as upper and lower. Fully molded rubber with locating collar. Twenty eight (28) are used per car. Two and one sixteenth inch (2 1/16") outside diameter by seven eighths inch (7/8") locating collar outside diameter by one half inch (1/2")

$12.69/ea.
In Stock
Door bumper

p/n: 70-2292-70

Bumper, door check link arm. Fully molded with proper cross section and design.

$12.99/ea.
In Stock
Body mounting pad

p/n: 40-0231-48

Pad, body mounting, upper. Fully molded rubber with locating collar. One and fifteen sixteenths inch (1 15/16") outside diameter by three fourths inch (3/4") locating collar outside diameter by one half inch (1/2") inside locating hole diameter. Three eig

$13.19/ea.
In Stock
Door bumper

p/n: 40-0037-70

Pad, door jamb. One and nine sixteenths (1-9/16) inch long by one and one eighth (1-1/8) inch wide.Length: 1.625 inches. Width: 1.0625 inches.

$13.29/ea.
In Stock
Hood bumper

p/n: 70-2043-42

Bumper, hood to fender side, at front.

$14.39/pr.
In Stock
Body mounting pad

p/n: 40-0233-48

Pad, body mounting, lower. Fully molded rubber. One and thirteen sixteenths inch (1 13/16") outside width by one and fifteen sixteenths inch (1 15/16") outside length by one half inch (1/2") inside hole diameter by three eighths inch (3/8") height.

$14.49/ea.
In Stock
Heater core tube grommet

p/n: 40-0444-88

Grommet, heater core tube to dash, lower.

$14.59/ea.
In Stock
Tan bowdrill cloth tape

p/n: 70-1173-65

Tape, brown (tan) bowdrill cloth. Adhesive backed, used to create cloth cover surface for side rail weatherstrips typically. Two and one half (2-1/2) inches by five (5) foot roll. Pressure sensitive, for covering convertible side window weatherstrip such

$14.99/ea.
In Stock
Door bumper

p/n: 40-0215-70

Bumper, door check link.

$16.19/ea.
In Stock
Door bumper

p/n: 40-0042-70

Pad, door jamb. Earlier type, screw retained, perfect copy.Length: 1.50 inches. Width: 1.25 inches.

$16.19/ea.
In Stock
Hood bumper

p/n: 82-0212-42

Bumper, hood to fender ledge. Excellent reproduction, made just like original.

$16.79/pr.
In Stock
Bowdrill cloth tape

p/n: 70-1172-65

Tape, black bowdrill cloth. Adhesive backed, used to create cloth cover surface for side rail weatherstrips typically. Two and one half (2-1/2) inches by five (5) foot roll. Pressure sensitive, for covering convertible side window weatherstrip such as our

$16.79/ea.
In Stock
Coil wire sleeve

p/n: 40-0336-21

Nipple, sparkplug wire at sparkplug, for right angle plug terminal. This is an exact copy of the style used at the time. Not a modernistic makeover.

$17.19/ea.
In Stock
Exhaust Support Grommet

p/n: 60-0031-13

Grommet, rear and middle muffler hanger.Height: .8125 inches.

$17.69/ea.
In Stock
Door Bumper

p/n: 40-0235-70

Bumper, door striker plate. Two (2) per door, front and rear.Length: 1.375 inches. Width: .50 inches.

$17.99/pr.
In Stock
Steering gear bushing

p/n: 40-0130-36

Bushing, insulator, for steering gear arm. Four (4) required per car.

$18.39/ea.
In Stock
Body mounting pad

p/n: 40-0453-48

Insulator, body mounting. Fully molded rubber with locating collar. Use as required. Up to eight (8) are used per car. Two and one eighth inch (2 1/18") outside width by two and one fourth inch (2 1/4") outside length by seven eighths inch (7/8") locating

$18.89/ea.
In Stock
Brake shaft stop bumper

p/n: 40-0343-24

Cushion cap assembly, brake and clutch pedal stop screw. Brass cap with vulcanized rubber pad.Height: .50 inches.

$18.99/ea.
In Stock
Body mounting pad

p/n: 40-0232-48

Pad, body mounting, upper. Fully molded rubber with locating collar. As many as twelve (12) used per car. One and fifteen sixteenths inch (1 15/16") outside width by two inch (2") outside width. See drawing for more dimensions.

$19.19/ea.
In Stock
Hood support rod top cap

p/n: 40-0346-42

Pad, hood rest rod. For five sixteenths (5/16) inch diameter hood support rod. Also see our #40-0103-42.Length: 1.0 inches.

$19.49/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$20.39/ea.
In Stock
Trunk bumper

p/n: 70-1659-87

Bumper, trunk lid.Length: 1.50 inches. Width: 1.0 inches.

$20.89/ea.
In Stock
Steering column cushion

p/n: 40-0259-36

Pad, steering post bracket. One (1) per car. Cushions steering post clamp to instrument panel.Length: 3.50 inches.

$21.29/ea.
In Stock
Door bumper

p/n: 40-0131-70

Bumper, door side. Approximate size one half (1/2) inch by three fourth (3/4) inch by two (2) inch.Length: 2.0 inches. Width: .50 inches. Height: .

$21.79/ea.
In Stock