Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

69 items found matching 1934 Cadillac 355D 0 door Chassis
Side mount spare wheel grommet

p/n: 70-0341-37

Grommets, sidemount. These are the very large type, right and left. Used simultaneously with our #70-0388-37. Compare with your original. (See also our #70-0388-37).

$349.99/pr.
Made to Order Takes 1-2 Days
Side Mount Spare Wheel Grommet

p/n: 70-0388-37

Grommets/seals, for sidemounted spares, cover hole in fender. Large, fully flanged for fender metal, compare to our #70-0341-37 and your original. Symmetrical, right and left. Approximately five and three fourths (5-3/4) inches by eight (8) inches outside

$349.99/set
Ships in 3-4 Days
Side mount spare wheel grommet

p/n: 70-0119-37

Grommets, spare wheel sidemount arm.

$222.89/pr.
Made to Order Takes 1-2 Days
Rear bumper grommet

p/n: 70-0121-29

Grommets, rear bumper. For vehicles without luggage racks.

$201.69/pr.
Made to Order Takes 1-2 Days
Hood hinge top strap pivot

p/n: 70-0045-42

Pivot, hood hinge top strap. Cold rolled steel as original. Furnished in a four and one half (4-1/2) foot strip long enough for all models.

$174.89/ea.
In Stock
Ferrule installing tool

p/n: 70-0662-69

Installing tool, door and trunk handle ferrule. For cars and trucks using door and trunk handle ferrules such as our #70-0111-69.

$149.89/ea.
In Stock
Side mount spare grommet kit

p/n: 70-0180-37

Grommet kit, rear spare wheel mount for cars without luggage rack. Three (3) piece set consisting of two (2) large grommets, one (1) small grommet.

$129.79/set
Made to Order Takes 4 Days
Hood center protector

p/n: 70-0342-42

Protector, hood center. Brass core as original threaded to fit original screws.

$129.19/pr.
Made to Order Takes 2-3 Days
Shock and stabilizer seal

p/n: 70-1185-33

Seals, shock absorber and rear stabilizer link. Eight (8) piece set.

$127.99/set
Made to Order Takes 1-2 Days
Air inlet hose

p/n: 70-0405-41

Hose, air inlet, radiator shroud to air silencer. Two and one eighths (2-1/8) inch outside diameter by nine and three eighths (9-3/8) inch long. Beautiful copy of rare original part.

$121.79/ea.
Made to Order Takes 1-2 Days
Luggage rack grommet

p/n: 70-0287-46

Grommets, luggage rack brace rod through body. Styles with luggage rack arms.

$113.29/pr.
Made to Order Takes 1-2 Days
Hood corner pad

p/n: 70-0135-42

Pads, hood corners. right and left. Threaded brass core.

$103.99/pr.
Made to Order Takes 2-3 Days
Cadillac Motors pedal pad

p/n: 70-0076-22

Cadillac Motors pedal pads. Authentic straight diamond pattern. Especially good copy, fine detail.

$97.29/pr.
In Stock
Shock and stabilizer seal

p/n: 70-1184-33

Seals, shock absorber and rear stabilizer link. Eight (8) piece set.Width: 1.1875 inches.

$95.99/set
In Stock
Front bumper grommet

p/n: 70-0103-28

Grommets, front bumper. Theses are for the round, tubular bumper support.

$92.59/pr.
Made to Order Takes 1-2 Days
Motor Mount

p/n: 70-0244-48

Motor mount pad. Cloth base as original, low type, two (2) inches outside diameter by seven eighths (7/8) inch thick.

$89.39/pr.
Ships In 3-4 Days
Cadillac V-8 pedal pad

p/n: 70-0148-22

Cadillac V-8 pedal pads, clutch and brake. Another rare one we finally found to copy. Superior copy.

$88.19/pr.
In Stock
Hood vent bumper

p/n: 33-0053-42

Bumper, hood ventilator door, self retaining. Five sixteenths (5/16) inch diameter, forty eight (48) piece set.

$87.69/set
Made to Order Takes 1-2 Days
Ride regulator control grommet

p/n: 70-0639-33

Grommets, ride regulator control rod through fender splash shield. Two (2) per car. Made without rod hole. You cut rod slot as required at installation.

$87.39/pr.
Made to Order Takes 1-2 Days
Brake vacuum cylinder rod boot

p/n: 70-0485-24

Boot, brake vacuum cylinder rod, for piston type vacuum cylinder.

$84.99/ea.
Made to Order Takes 1-2 Days
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$79.49/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$79.49/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$79.49/ea.
In Stock
Filler neck extension pad

p/n: 70-0123-41

Mounting pad, filler neck extension. Four and nine sixteenths (4-9/16) inches diameter, double bead.

$70.99/ea.
Made to Order Takes 1-2 Days
Fuel neck grommet

p/n: 50-0059-39

Grommet, fuel filler neck. Fully molded rubber. Four and five eighths inch (4 5/8") outside diameter by two and three sixteenths inch (2-3/16") inside diameter by three fourths inch (3/4") height.

$64.29/ea.
In Stock
Gearshift knob

p/n: 30-0153-24

Knob, gearshift. Rubber only for flanged top nut on gearshift lever.

$54.99/ea.
Made to Order Takes 1-2 Days
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

$54.29/pr.
In Stock
Coil wire sleeve

p/n: 70-0109-21

Sleeve, coil wire to distributor. Fluted to match upper water hoses rubber only. V-12 & V-16 with coils mounted in radiator, V-8 with coils mounted horizontally on brace rods.

$53.79/ea.
Made to Order Takes 1-2 Days
Inner Fender Seal

p/n: 60-0288-45

Inner Fender Seal for anti-rattle, running board apron to body, or fender splash panels. Nine sixteenths (9/16) inch by seven eighths (7/8) inch slotted sponge rubber to accept rivets. Sold in eight (8) foot strips.

$50.79/ea.
In Stock
Brown gearshift boot

p/n: 50-0035-89

Boot, gearshift. Brown rubber. For black see our #50-0035-24.Color:brown Width: 2.8125 inches.

$50.19/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$46.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$46.99/ea.
In Stock
Steering column floorplate

p/n: 70-0340-88

Seal, steering column to toe board. Three fourths (3/4) inch thick, high grade sponge, die cut holes.Length: 3.875 inches. Width: 3.875 inches.

$46.29/ea.
Made to Order Takes 2-3 Days
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$45.19/ea.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$42.29/ea.
In Stock
Gearshift boot

p/n: 50-0035-24

Boot, gearshift. Black rubber. For brown see our #50-0035-89.Width: 2.8125 inches.

$36.79/ea.
In Stock
Horn trumpet grommet

p/n: 70-0302-21

Grommets, horn projector. For under hood horn brackets. Two (2) per car.

$29.49/pr.
In Stock
Rear spring bushing

p/n: 70-0588-32

Bushing, rear spring, front eye leaf. Four (4) per car.

$29.49/ea.
In Stock
Starter solenoid boot

p/n: 70-0371-21

Boot, starter solenoid.

$28.79/ea.
In Stock
Rear spring bushing

p/n: 70-0589-32

Bushing, rear spring, front or rear eye leaf.

$23.29/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$20.39/ea.
In Stock
Door check link rod end stop

p/n: 70-0326-70

End stop and pad, door check link rod. Rubber with embedded steel plate, five sixteenths (5/16) inch diameter thread. Most models with rod type door checks.

$13.99/ea.
In Stock
Shock absorber bushing

p/n: 50-0087-33

Bushing, Delco type, shock absorber link. One and five sixteenths (1-5/16) inch outside diameter, seven sixteenths (7/16) inch inside diameter.

$11.19/ea.
In Stock
Coil wire sleeve

p/n: 70-1179-21

Sleeve, coil wire to distributor. Fluted to match upper water hoses rubber only.

$10.69/ea.
In Stock
Door bumper

p/n: 70-1159-71

Pad, door side bumper. Clip retained.

$10.29/ea.
In Stock
1/8" Fabric Hood Lacing

p/n: 60-0578-42

Fabric hood lacing provides anti-squeak functionality. Available by the foot.

$8.79/ft.
In Stock
3/16" Fabric Hood Lacing

p/n: 70-2221-42

Hood lacing provides anti-squeak functionality. Available by the foot.

$8.79/ft.
In Stock
Door Bumper

p/n: 34-0025-42

Bumper, front and rear body hinge pillar, one (1) inch diameter by one fourth (1/4) inch thick, held by screw, steel core. Auxiliary, used only where needed to prevent door rattle.

$8.59/ea.
In Stock
Body mounting pad

p/n: 70-0264-48

Cushion, body bolts under washer below bracket. Fully molded rubber. One and one half inch (1 1/2") inch outside diameter by seventeen thirty seconds inch (17/32") inside hole diameter by one fourth inch (1/4") height.

$7.99/ea.
In Stock
1-3/4" Firewall Grommet

p/n: 32-0333-20

Grommet designed for firewall applications.

$7.89/ea.
Made to Order Takes 1-2 Days