Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

97 items found matching 1935 Chevrolet Standard 2 door Coupe - 2 Passenger
Side window run channel kit

p/n: 90-0140-58

This eight (8) piece kit includes the inner and outer windowfelts, upper rigid run channels, and flexible run channels needed to complete two (2) doors. Used for front or rear doors in models with vent windows in the door. Models with wood in the doors use our #70-1168-58 as lower rigid run channel.

$227.59/set
Kit
Front Door Vent Window Kit

p/n: 90-0454-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$181.99/set
Kit
Front Door Vent Window Weatherstrips

p/n: 38-0022-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$175.59/pr.
In Stock
Motor mount service

p/n: 60-0224-11

Engine mount, side (support cushions), right and left. Side frame bracket to clutch housing bracket. Two (2) per car.Width: 2.5 inches. Height: 1.5 inches.

$172.89/pr.
Call or Email
Ferrule installing tool

p/n: 70-0662-69

Installing tool, door and trunk handle ferrule. For cars and trucks using door and trunk handle ferrules such as our #70-0111-69.

$149.89/ea.
In Stock
Motor mount service

p/n: 60-0241-11

Cushion, engine mount, front. Revulcanization service only.Length: 3.0 inches. Width: 2.1875 inches.

$141.99/pr.
Call or Email
Windshield Gasket

p/n: 60-0366-50

This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$128.19/ea.
In Stock
Rear Window Gasket

p/n: 60-0367-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$125.99/ea.
In Stock
Front Door weatherstrip

p/n: 90-1822-72

Door edge weatherstrip. This part is the primary door to body weatherstrip.

$109.39/set
In Stock
Transmission mounting pad

p/n: 60-0303-25

Insulator replacement set. 2-piece unit of special soft rubber to be used with original steel channel and plate.

$100.69/set
In Stock
Rear spare wheel carrier pad

p/n: 60-0164-37

Pad, rear mounted spare wheel support. Seven (7) inch by seven (7) inch, three (3) hole pattern, brass core as original.Width: 7.0 inches. Height: 7.

$80.89/ea.
Made to Order Takes 2-3 Days
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$79.49/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$79.49/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$79.49/ea.
In Stock
Hood corner pad

p/n: 60-0399-42

Bumpers, hood front corners. Right and Left with metal cores.Width: 1.625 inches.

$78.89/pr.
In Stock
Hood corner pad

p/n: 60-0053-42

Pads, hood rear corners, right and left. Metal core as original, with metal tabs for securing to hood.Width: 1.3125 inches. Height: 1.50 inches.

$75.19/pr.
In Stock
Fenderskirt edge seal

p/n: 60-0298-45

Seal, wheel streamliner (fenderskirt) to fender. Two (2) strips each cut five (5) foot long.Length: 60.0 inches. Width: .625 inches.

$64.19/pr.
In Stock
Access hole plug

p/n: 60-0016-24

Cover, brake master cylinder filler and inspection hole. Metal core as original.

$58.69/ea.
In Stock
Body Anti-Squeak Rubber

p/n: 60-0054-73

Bulb type seal, gravel shield-to-rear bumper, anti-squeak. Also used as a door weatherstrip for some makes and models. Twelve (12) foot strip.

$57.49/ea.
In Stock
Brake cable anti-rub cover

p/n: 60-0443-24

Sleeve, rear brake cable anti-rub. Six (6) piece set. One half (1/2) inch inside diameter, seven eighth (7/8) inch outside diameter.

$54.59/set
In Stock
Brake cable boot

p/n: 60-0156-24

Boot, front brake cable end at brake backing plate. Two and seven eighths (2-7/8) inches long.Length: 2.875 inches.

$54.59/pr.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

$54.29/pr.
In Stock
Brake cable boot

p/n: 60-0155-24

Boot, rear, brake cable end at brake backing plate. Three and one half (3-1/2) inches long.Length: 3.50 inches.

$51.29/pr.
In Stock
Flexible Run Channel

Cloth covered, mohair lined flexible metal channel for sides and top of door windows. Available in 5ft and 6ft lengths.

From $47.89/ea.
View
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$46.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$46.99/ea.
In Stock
Rear spare wheel carrier pad

p/n: 60-0365-37

Pad, wheel carrier, rear spare.Length: 6.75 inches.

$46.99/ea.
In Stock
Bowtie emblem pedal pad

p/n: 60-0043-22

Pads, brake and clutch pedals. One and seven eighths (1-7/8) inch by four (4) inch overall. Excellent detail with bowtie emblem like original.

$46.49/pr.
In Stock
Accelerator rod seal

p/n: 60-0136-41

Grommet, accelerator rod through toe board. Brass core and center bushing as original.

$46.29/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$45.19/ea.
In Stock
Rumbleseat lid bumper pad

p/n: 60-0191-87

Bumper pad, rumbleseat lid, upper corners. Compare with our #70-0120-87.Width: 1.0 inches. Height: 1.125 inches.

$45.19/pr.
In Stock
Accelerator rod seal

p/n: 60-0086-40

Grommet, accelerator rod through toe board. Brass core as original.

$43.69/ea.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$42.29/ea.
In Stock
Accelerator pedal pad

p/n: 60-0085-40

Pad, accelerator pedal. Slip-over type.Length: 7.125 inches.

$40.49/ea.
Made to Order Takes 1-2 Days
Fuel neck grommet

p/n: 60-0022-41

Seal, fuel filler flange. Fully molded rubber, slightly angled. Three and eleven sixteenths inch (3 11/16") outside diameter by two and three sixteenths inch (2-3/16") top hole diameter by two and five eighths inch (2 5/8") bottom hole diameter. One and o

$39.99/ea.
In Stock
Exhaust support grommet

p/n: 60-0404-13

Grommet, muffler pipe support.Length: 3.125 inches.

$38.89/ea.
Made to Order Takes 1-2 Days
Horn button contact cushion

p/n: 60-0344-21

Cushion, horn blowing button.Height: 1.0 inches.

$36.89/ea.
In Stock
Headlight mounting pad

p/n: 60-0163-14

Pad, headlight bracket mounting right and left. One and seven eighths (1-7/8) inch by two and seven eighths (2-7/8) inch overall.Length: 2.875 inches.

$36.19/pr.
In Stock
Cowl vent gasket

p/n: 60-0339-54

Gasket, cowl vent cover.Width: 18.25 inches. Height: 4.0 inches.

$31.29/ea.
In Stock
Starter button

p/n: 60-0322-21

Starter button, push on replacement to rod. Two (2) inch outside diameter.

$31.19/ea.
In Stock
Taillight mounting pad

p/n: 60-0364-15

Pad, taillight mounting to rear fender.Length: 1.0625 inches.

$29.19/ea.
In Stock
Windshield division bar gasket

p/n: 70-0059-51

Gasket, set, inner and outer, for divided windshield center post. Two (2) piece set.

$27.69/set
In Stock
Headlight mounting pad

p/n: 60-0363-14

Pad, headlight support to radiator shell.

$25.39/pr.
In Stock
Taillight mounting pad

p/n: 60-0116-15

Pad, taillight bracket to fender. Four (4) inches long. Compare with our #60-0172-15 and #60-0545-15.Length: 4.0 inches.

$25.39/ea.
In Stock
Firewall grommet

p/n: 60-0010-45

Grommet, firewall, oblong four (4) hole style. Fits steel retainer for throttle and choke cables, oil and temperature lines.

$23.89/ea.
In Stock
Starter button cover

p/n: 60-0166-21

Cover, starter pedal button. Rubber slip over type for old metal. Two (2) inch outside diameter. If car doesn't have old metal, see our #60-0322-21.

$21.89/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$20.39/ea.
In Stock
Exhaust Support Grommet

p/n: 60-0031-13

Grommet, rear and middle muffler hanger.Height: .8125 inches.

$17.69/ea.
In Stock
Firewall grommet

p/n: 70-0158-21

Grommet for ignition switch conduit through firewall.

$16.99/ea.
In Stock
Door handle ferrule

p/n: 70-0111-69

Ferrule, for three fourths (3/4) inch outside door handle. Chrome plated brass. (See #70-0009-69 for grommet). Used for outside door handle or outside trunk handle.

$16.69/ea.
In Stock