Search Results

119 items found matching 1938 Chevrolet Master Deluxe 2 door Business Coupe
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Side window run channel kit

p/n: 90-0140-58

This eight (8) piece kit includes the inner and outer windowfelts, upper rigid run channels, and flexible run channels needed to complete two (2) doors. Used for front or rear doors in models with vent windows in the door. Models with wood in the doors use our #70-1168-58 as lower rigid run channel.

$236.10/set
$212.50/set
10% discount
Kit
Front Door Weatherstrip Kit

p/n: 90-0100-72

Front door weatherstrip. This set is the primary seal for the door to the body. Set includes the door perimeter weatherstrip and the door bottom weatherstrip. Enough for two (2) doors. Includes fasteners.

$204.70/set
In Stock
Front Door Vent Window Kit

p/n: 90-0374-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$194.40/set
$184.70/set
5% discount
Kit
Motor mount service

p/n: 60-0224-11

Engine mount, side (support cushions), right and left. Side frame bracket to clutch housing bracket. Two (2) per car.Width: 2.5 inches. Height: 1.5 inches.

$167.80/pr.
Call or Email
Transmission mount service

p/n: 60-0315-25

Insulator (support), motor at transmission. Revulcanization service only.

$167.30/ea.
Call or Email
Front Door Vent Window Weatherstrips

p/n: 38-0029-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$148.30/pr.
In Stock
Motor mount service

p/n: 60-0241-11

Cushion, engine mount, front. Revulcanization service only.Length: 3.0 inches. Width: 2.1875 inches.

$137.90/pr.
Call or Email
Rear spring bumper

p/n: 60-0179-35

Bumper, rear spring on frame. Entire assembly with rubber vulcanized to steel as original.

$132.20/pr.
In Stock
Windshield Gasket

p/n: 60-0198-50

This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$115.40/ea.
In Stock
Rear Window Gasket

p/n: 60-0199-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$108.70/ea.
In Stock
Quarter window weatherstrip

p/n: 60-0282-77

Channel, fixed quarter window.

$108.10/pr.
In Stock
Transmission mount service

p/n: 60-0530-25

Insulator, plate assembly, guide, transmission support bracket. Revulcanization service only.Used with our #60-0315-25 from 1940 to 1946..Length: 5.

$101.60/ea.
Call or Email
Trunk Weatherstrip

p/n: 70-0796-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.

$99.80/ea.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$76.30/ea.
In Stock
Windshield division bar gasket

p/n: 70-0159-51

Gasket, windshield division post, inner and outer, also acts as retainer for outer division bar chrome, molding.

$64.50/set
In Stock
Rear bumper grommet

p/n: 60-0018-28

Grommet and seal, rear bumper. Fully molded rubber. Three and one fourth inch (3-1/4") outside length by two and one fourth inch (2-1/4") outside width by one and seven eighths inch (1-7/8") inside hole length by nine sixteenths inch (9/16") inside hole w

$62.50/pr.
In Stock
Front bumper grommet

p/n: 60-0142-28

Grommets, front bumper, right and left, hollow back. Fully molded rubber. Three and seven sixteenths inch (3-7/16") outside length by two and nine sixteenths inch (2-9/16") outside width by one and five eighths inch (1-5/8") inside hole length by seven si

$61.70/pr.
In Stock
Fenderskirt edge seal

p/n: 60-0298-45

Seal, wheel streamliner (fenderskirt) to fender. Two (2) strips each cut five (5) foot long.Length: 60.0 inches. Width: .625 inches.

$61.60/pr.
In Stock