Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

141 items found matching 1939 Chevrolet Master Deluxe 2 door Coupe - 4 Passenger
Glass Weatherstrip Kit

p/n: 90-3360-90

This comprehensive sixteen (16) piece kit includes the major weatherstrip components and some other essential parts needed for your restoration project. These reproduction parts are designed from originals for superior performance, durability and a factory fit.

$800.88/set
Side window run channel kit

p/n: 90-0140-58

This eight (8) piece kit includes the inner and outer windowfelts, upper rigid run channels, and flexible run channels needed to complete two (2) doors. Used for front or rear doors in models with vent windows in the door. Models with wood in the doors use our #70-1168-58 as lower rigid run channel.

$227.59/set
Kit
Front Door Vent Window Kit

p/n: 90-0375-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$192.49/set
Kit
Motor mount service

p/n: 60-0224-11

Engine mount, side (support cushions), right and left. Side frame bracket to clutch housing bracket. Two (2) per car.Width: 2.5 inches. Height: 1.5 inches.

$172.89/pr.
Call or Email
Transmission mount service

p/n: 60-0315-25

Insulator (support), motor at transmission. Revulcanization service only.

$172.39/ea.
Call or Email
Front Door weatherstrip

p/n: 90-0104-72

Door edge weatherstrip. This part is the primary door to body weatherstrip. Includes 22 ft (11ft per dr) of main door seal, 7ft (3.5 ft per dr bottom seal and 20 fastener clips for easy installation. Also includes instruction sheet. Made of top quality r

$165.99/set
In Stock
Front Door Vent Window Weatherstrips

p/n: 38-0029-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$152.79/pr.
In Stock
Motor mount service

p/n: 60-0241-11

Cushion, engine mount, front. Revulcanization service only.Length: 3.0 inches. Width: 2.1875 inches.

$141.99/pr.
Call or Email
Rear spring bumper

p/n: 60-0179-35

Bumper, rear spring on frame. Entire assembly with rubber vulcanized to steel as original.

$136.29/pr.
Made to Order Takes 2-3 Days
Windshield Gasket

p/n: 70-0601-50

This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$128.19/ea.
In Stock
Rear Window Gasket

p/n: 60-0199-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$111.99/ea.
In Stock
Transmission mount service

p/n: 60-0530-25

Insulator, plate assembly, guide, transmission support bracket. Revulcanization service only.Used with our #60-0315-25 from 1940 to 1946..Length: 5.

$104.69/ea.
Call or Email
Trunk Weatherstrip

p/n: 70-1128-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.

$94.19/ea.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$79.49/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$79.49/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$79.49/ea.
In Stock
Rear bumper grommet

p/n: 70-0089-28

Grommets, rear bumper. Fully molded rubber. Four and one fourths inch (4-1/4") outside length by two and five sixteenths inch (2-5/16") outside width by one and eleven sixteenths inch (1-11/16") inside hole length by nine sixteenths inch (9/16") inside ho

$75.29/pr.
In Stock
Fenderskirt edge seal

p/n: 70-0055-45

Seal, fenderskirt edge. Each five (5) foot long. Similar to our #20-0111-44, but thicker.Length: 60.0 inches. Width: .25 inches.

$74.89/pr.
In Stock
Front bumper grommet

p/n: 60-0080-28

Grommets, front bumper, right and left. Hollow construction as original. Fully molded rubber. Three and five sixteenths inch (3-5/16") outside length by two and thirteen sixteenths inch (2-13/16") outside width by one and five eighths inch (1-5/8") inside

$73.79/pr.
In Stock
Front Stabilizer Kit

p/n: 60-0221-33

Link kit, full replacement, front stabilizer bar link. Twenty two (22) piece set. Hex head bolt 5/16"-24NF x 6-3/8" long. Comes with metal sleeve, metal cup washers and rubber grommets.

$72.49/set
In Stock
Sliding quarter window seal

p/n: 60-0398-78

Weatherstrip, sliding quarter window. Mounted vertically in body where leading edge of sliding window fits when closed. Right & left rubber only.

$67.99/pr.
In Stock
Rear bumper grommet

p/n: 60-0018-28

Grommet and seal, rear bumper. Fully molded rubber. Three and one fourth inch (3-1/4") outside length by two and one fourth inch (2-1/4") outside width by one and seven eighths inch (1-7/8") inside hole length by nine sixteenths inch (9/16") inside hole w

$64.99/pr.
In Stock
Fenderskirt edge seal

p/n: 60-0298-45

Seal, wheel streamliner (fenderskirt) to fender. Two (2) strips each cut five (5) foot long.Length: 60.0 inches. Width: .625 inches.

$64.19/pr.
In Stock
Trunk bumper

p/n: 50-0163-87

Bumper, trunk. Brass core, screw held. Two (2) per car.Length: 1.5 inches. Width: .75 inches.

$60.69/pr.
In Stock
Brake and Clutch Pedal Pads

p/n: 60-0068-22

Brake and Clutch Pedal Pads - The proper design and fully detailed with ribs extending down over sides of the pad. Length: 3.50 inches. Width: 2.0 inches.

$60.59/pr.
In Stock
Front Spring Rubber Bumper

p/n: 70-0329-32

Front Spring Rubber Bumper - for upper control arm on frame.

$60.59/pr.
In Stock
Access hole plug

p/n: 60-0016-24

Cover, brake master cylinder filler and inspection hole. Metal core as original.

$58.69/ea.
In Stock
Front suspension bumper

p/n: 60-0093-32

Bumper, front lower suspension arm. Attaches to front cross member by carrot retainer.Height: 2.0 inches.

$58.29/pr.
In Stock
Body Anti-Squeak Rubber

p/n: 60-0054-73

Bulb type seal, gravel shield-to-rear bumper, anti-squeak. Also used as a door weatherstrip for some makes and models. Twelve (12) foot strip.

$57.49/ea.
In Stock
Parking light mounting pad

p/n: 60-0204-17

Mounting pad, accessory. Fender parking light.Length: 10.25 inches.

$55.79/pr.
In Stock
Brown seat back rest pad

p/n: 70-0482-89

Rest pads, seat back, outer, on two (2) door styles with folding seats. Brown rubber. For black see our #70-0482-88. Self retaining, perfect copy.

$54.59/pr.
Made to Order Takes 1-2 Days
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

$54.29/pr.
In Stock
Windshield division bar gasket

p/n: 60-0039-51

Gasket set, windshield center post. Two (2) piece set for inner and outer, molded with holes and pilots.

$53.69/set
In Stock
Bowtie emblem pedal pad

p/n: 60-0125-22

Pad, clutch and brake pedal, with Chevy bow tie in tread. Perfect copy, sharp detail.

$52.79/pr.
In Stock
Folding seat bumper

p/n: 70-0482-88

Rest pads, seat back, outer, on two (2) door styles with folding seats. Black rubber. For brown see our #70-0482-89. Self retaining, perfect copy.

$50.79/pr.
In Stock
Vent division bar weatherstrip

p/n: 60-0509-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$49.89/pr.
In Stock
Rear spring bushing

p/n: 60-0311-35

Bushing, rear spring front eye, inlox cartridge type as original.

$48.29/ea.
In Stock
Flexible Run Channel

Cloth covered, mohair lined flexible metal channel for sides and top of door windows. Available in 5ft and 6ft lengths.

From $47.89/ea.
View
Accelerator pedal pad

p/n: 60-0097-40

Pad, accelerator pedal. Slip-over type for original core.Length: 9.125 inches.

$47.79/ea.
Made to Order Takes 1-2 Days
Beltline Weatherstrip

Weatherstrip, door window inner and outer, front and rear doors. Bend to fit. Available in a 3ft pair and 6ft piece.

From $46.99/ea.
View
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$46.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$46.99/ea.
In Stock
Spring seat seal

p/n: 60-0261-32

Seal, rear spring seat. Four (4) piece set.Height: .1875 inches.

$46.79/set
In Stock
Accelerator rod seal

p/n: 60-0136-41

Grommet, accelerator rod through toe board. Brass core and center bushing as original.

$46.29/ea.
In Stock
Brown steering column grommet

p/n: 60-0102-89

Grommet, steering column at floor (column shift). Brown rubber. For black see our #60-0102-36.

$45.69/ea.
Made to Order Takes 1-2 Days
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$45.19/ea.
In Stock
Front Stabilizer Bushing

p/n: 60-0088-34

Front Stabilizer Bushing - Front stabilizer bar mounting. Fully molded rubber. Two (2) required per car. One and five sixteenths inch (1 5/16") length by one and five sixteenths inch (1 5/16") width by five eighths inch (5/8") inside hole diameter by one and three fourths inch (1 3/4") height.

$44.99/pr.
In Stock
Fuel neck grommet

p/n: 60-0040-41

Grommet, fuel filler neck. Fully molded rubber, slighlty angled with retaining flange. Three and five sixteenths inch (3 5/16") outside width by three and one half inch (3 1/2") outside length by two and one eighth inch (2 1/8") inside hole diameter by tw

$44.49/ea.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$42.29/ea.
In Stock
License light mounting pad

p/n: 60-0205-17

Mounting pad trunk license light. Not an original item. But many owners wish to pad this light from the paint job. Good fit, perfect bead form.

$41.59/ea.
In Stock