Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

139 items found matching 1939 Chevrolet Master Deluxe 4 door Sedan - 5 Passenger
Window Felt and Run Channel Set

p/n: 90-0140-58

This eight (8) piece Window Felt and Run Channel set includes the inner and outer window felts, upper rigid run channels, and flexible run channels needed to complete two doors. The set can be used for front or rear doors in models with vent windows in the door.

$318.10/set
$286.19/set
10% discount
Kit
Front Door Vent Window Set

p/n: 90-0375-90

This Front Door Vent Window weatherstrip set is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$248.20/set
$235.69/set
5% discount
Kit
Window Felt and Run Channel Set

p/n: 90-0142-58

This six (6) piece Window Felt and Run Channel set includes the inner and outer window felts and the flexible run channels needed to complete two (2) doors. This set is used for front or rear doors in models without vent windows in the door.

$257.80/set
$231.89/set
10% discount
Kit
Engine Mount Service – Revulcanization Only

p/n: 60-0224-11

This Revulcanization Service Only is designed to restore your Side Engine Support Mount to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.

$208.39/pr.
Call or Email
Transmission Support Mount - Revulcanization Service Only

p/n: 60-0315-25

This Revulcanization Service Only is designed to restore your Transmission Support Mount to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.

$207.69/ea.
Call or Email
Front Door Weatherstrip

p/n: 90-0104-72

Door edge weatherstrip. This part is the primary door to body weatherstrip. Includes 22 ft (11ft per dr) of main door seal, 7ft (3.5 ft per dr bottom seal and 20 fastener clips for easy installation. Also includes instruction sheet. Made of top quality r

$199.99/set
In Stock
Front Door Vent Window Weatherstrips

p/n: 38-0029-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$184.29/pr.
In Stock
Rear Door weatherstrip

p/n: 90-0105-72

Door edge weatherstrip. This part is the primary door to body weatherstrip.

$184.29/set
In Stock
Engine Mount Service – Revulcanization Only

p/n: 60-0241-11

This Revulcanization Service Only is designed to restore your Front Engine Support Mount to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.

$171.19/pr.
Call or Email
Rear spring bumper

p/n: 60-0179-35

Bumper, rear spring on frame. Entire assembly with rubber vulcanized to steel as original.

$164.39/pr.
Made to Order Takes 5-7 Days
Windshield Gasket

p/n: 70-0601-50

This Windshield Gasket mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$154.39/ea.
In Stock
Rear Window Gasket

p/n: 60-0199-81

This Rear Window Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$134.99/ea.
In Stock
Trunk Weatherstrip

p/n: 70-0083-85

This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$128.19/ea.
In Stock
Transmission Support Mount - Revulcanization Service Only

p/n: 60-0530-25

Insulator - Plate Assembly - Guide for transmission support bracket. This Revulcanization Service Only is designed to restore your transmission mount to a like new original condition. Please call or email for more service details and ordering.

$126.29/ea.
Call or Email
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$98.79/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$98.79/ea.
In Stock
Fender Welting with 3/16 Bead - 50 Ft. Roll

p/n: 70-1100-44

A superior quality Fender Welting material constructed of reinforced black vinyl over a vinyl core. Typically used for attaching four (4) fenders to body. Sold in a 50 foot roll.

$98.79/ea.
In Stock
Rear bumper grommet

p/n: 70-0089-28

Grommets, rear bumper. Fully molded rubber. Four and one fourths inch (4-1/4") outside length by two and five sixteenths inch (2-5/16") outside width by one and eleven sixteenths inch (1-11/16") inside hole length by nine sixteenths inch (9/16") inside ho

$93.49/pr.
In Stock
Fender Skirt Edge Weatherstrips

p/n: 70-0055-45

This Fender Skirt Edge Weatherstrip pair is designed from the original part for superior fitment, finish and sealing function. Two five (5) foot strips that fit between the rear wheel fender skirt and rear quarter panel.

$92.99/pr.
In Stock
Front bumper grommet

p/n: 60-0080-28

Grommets, front bumper, right and left. Hollow construction as original. Fully molded rubber. Three and five sixteenths inch (3-5/16") outside length by two and thirteen sixteenths inch (2-13/16") outside width by one and five eighths inch (1-5/8") inside

$91.59/pr.
In Stock
Sliding quarter window seal

p/n: 60-0398-78

Weatherstrip, sliding quarter window. Mounted vertically in body where leading edge of sliding window fits when closed. Right & left rubber only.

$84.49/pr.
In Stock
Rear bumper grommet

p/n: 60-0018-28

Grommet and seal, rear bumper. Fully molded rubber. Three and one fourth inch (3-1/4") outside length by two and one fourth inch (2-1/4") outside width by one and seven eighths inch (1-7/8") inside hole length by nine sixteenths inch (9/16") inside hole w

$80.79/pr.
In Stock
Fenderskirt edge seal

p/n: 60-0298-45

Seal, wheel streamliner (fenderskirt) to fender. Two (2) strips each cut five (5) foot long.Length: 60.0 inches. Width: .625 inches.

$79.89/pr.
In Stock
Brake and Clutch Pedal Pads

p/n: 60-0068-22

Brake and Clutch Pedal Pads - The proper design and fully detailed with ribs extending down over sides of the pad. Length: 3.50 inches. Width: 2.0 inches.

$75.29/pr.
In Stock
Front Spring Rubber Bumper

p/n: 70-0329-32

Front Spring Rubber Bumper Pair - for upper control arm on frame.

$75.29/pr.
In Stock
Brake Master Cylinder Filler Access Hole Cover

p/n: 60-0016-24

This Master Cylinder Access Hole Cover is designed from the original part for superior fitment and seal. Secures the Brake Master Cylinder Filler and Inspection Access Hole in the vehicle.

$72.89/ea.
In Stock
Front suspension bumper

p/n: 60-0093-32

Bumper, front lower suspension arm. Attaches to front cross member by carrot retainer.Height: 2.0 inches.

$72.39/pr.
Made to Order Takes 5-7 Days
Door - Gravel Shield - Running Board Weatherstrip

p/n: 60-0054-73

This Door - Gravel Shield - Running Board Weatherstrip is a anti-squeak bulb type extrusion with fitment for General Motors vehicles. A twelve (12) foot strip made of high-quality EPDM dense rubber and designed from original parts for superior fitment, finish and function.

$71.49/ea.
In Stock
Parking light mounting pad

p/n: 60-0204-17

Mounting pad, accessory. Fender parking light.Length: 10.25 inches.

$69.29/pr.
Made to Order Takes 5-7 Days
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

$67.59/pr.
In Stock
Windshield division bar gasket

p/n: 60-0039-51

Gasket set, windshield center post. Two (2) piece set for inner and outer, molded with holes and pilots.

$66.89/set
In Stock
Bowtie emblem pedal pad

p/n: 60-0125-22

Pad, clutch and brake pedal, with Chevy bow tie in tread. Perfect copy, sharp detail.

$65.69/pr.
In Stock
Flexible Run Channel

p/n: 70-1239-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$64.89/ea.
In Stock
Beltline Weatherstrip

p/n: 70-0555-58

This Beltline Weatherstrip is sold as a three (3) foot pair. The beltline is used for side window inner and/or outer, front and/or rear doors. Available in a 3ft pair.

$63.99/pr.
In Stock
Vent division bar weatherstrip

p/n: 60-0509-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$63.89/pr.
In Stock
Rear spring bushing

p/n: 60-0311-35

Bushing, rear spring front eye, inlox cartridge type as original.

$61.79/ea.
In Stock
Flexible Run Channel

p/n: 70-1238-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$61.29/ea.
In Stock
Accelerator pedal pad

p/n: 60-0097-40

Pad, accelerator pedal. Slip-over type for original core.Length: 9.125 inches.

$61.19/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$60.29/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$60.29/ea.
In Stock
Sliding Quarter Window Weatherstrip

p/n: 70-0353-78

This Sliding Quarter Window Weatherstrip is used for side window inner and/or outer, front and/or rear doors. Available in a 6ft lengths.

$60.29/ea.
In Stock
Spring seat seal

p/n: 60-0261-32

Seal, rear spring seat. Four (4) piece set.Height: .1875 inches.

$59.89/set
In Stock
Accelerator rod seal

p/n: 60-0136-41

Grommet, accelerator rod through toe board. Brass core and center bushing as original.

$59.29/ea.
In Stock
Brown steering column grommet

p/n: 60-0102-89

Grommet, steering column at floor (column shift). Brown rubber. For black see our #60-0102-36.

$58.59/ea.
Made to Order Takes 5-7 Days
Fender Welting with 3/16 Bead - 25 Ft. Roll

p/n: 70-1099-44

A superior quality Fender Welting material constructed of reinforced black vinyl over a vinyl core. Typically used for attaching two (2) fenders to body. Sold in a 25 foot roll.

$57.79/ea.
In Stock
Front Stabilizer Bushing

p/n: 60-0088-34

Front Stabilizer Bushing - Front stabilizer bar mounting. Fully molded rubber. Two (2) required per car. One and five sixteenths inch (1 5/16") length by one and five sixteenths inch (1 5/16") width by five eighths inch (5/8") inside hole diameter by one and three fourths inch (1 3/4") height.

$57.59/pr.
In Stock
Fuel Neck Grommet

p/n: 60-0040-41

Grommet, fuel filler neck. Fully molded rubber, slightly angled with retaining flange. Three and five sixteenths inch (3-5/16") outside width by three and one half inch (3-1/2") outside length by two and one eighth inch (2-1/8") inside hole diameter.

$56.99/ea.
In Stock
Side Window Sash Channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$54.39/ea.
In Stock
License light mounting pad

p/n: 60-0205-17

Mounting pad trunk license light. Not an original item. But many owners wish to pad this light from the paint job. Good fit, perfect bead form.

$53.29/ea.
Made to Order Takes 5-7 Days
Cowl vent weatherstrip

p/n: 70-0143-54

Gasket, cowl vent. Perfect copy of original, not a sponge substitute, top quality material.

$53.19/ea.
In Stock