Search Results

110 items found matching 1939 Pontiac Special Series 25 2 door Business Coupe
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Side window run channel kit

p/n: 90-0140-58

This eight (8) piece kit includes the inner and outer windowfelts, upper rigid run channels, and flexible run channels needed to complete two (2) doors. Used for front or rear doors in models with vent windows in the door. Models with wood in the doors use our #70-1168-58 as lower rigid run channel.

$236.10/set
$212.50/set
10% discount
Kit
Front Door Vent Window Kit

p/n: 90-0373-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$194.40/set
$184.70/set
5% discount
Kit
Motor mount service

p/n: 27-0038-11

Insulator, engine support rear. Two (2) per car. Revulcanization service only.Length: 4.0 inches.

$173.90/pr.
Call or Email
Front Door weatherstrip

p/n: 90-0104-72

Door edge weatherstrip. This part is the primary door to body weatherstrip. Includes 22 ft (11ft per dr) of main door seal, 7ft (3.5 ft per dr bottom seal and 20 fastener clips for easy installation. Also includes instruction sheet. Made of top quality r

$161.20/set
In Stock
Front Door Vent Window Weatherstrips

p/n: 38-0029-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$148.30/pr.
In Stock
Windshield Gasket

p/n: 70-1788-50

This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$140.30/ea.
Made to Order Takes 2-3 Days
Windshield Gasket

p/n: 70-0601-50

This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$124.40/ea.
In Stock
Motor mount service

p/n: 27-0037-11

Insulator, engine support, front. One (1) per car. Revulcanization service only.Length: 5.625 inches.

$115.50/ea.
Call or Email
Quarter window weatherstrip

p/n: 27-0040-77

Weatherstrip, fixed rear quarter window. Vulcanized in one piece for easy application, no splicing required.

$114.30/pr.
In Stock
Rear Window Gasket

p/n: 60-0199-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$108.70/ea.
In Stock
Trunk Weatherstrip

p/n: 70-1128-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.

$90.50/ea.
In Stock
Trunk Weatherstrip

p/n: 70-1129-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.

$82.70/ea.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$76.30/ea.
In Stock
Detachable center post pad

p/n: 70-0280-88

Pads, folding front seat rest, brass core. Also used as bumper, slat iron to compartment on convertibles.Width: 1.375 inches. Height: .28125 inches.

$74.20/pr.
In Stock
Brown accelerator service

p/n: 70-1802-89

Accelerator pedal. Brown rubber. For black see our #70-1802-40. Revulcanization service only.Color:brown Length: 7.375 inches. Width: 2.

$73.50/ea.
Call or Email
Rear bumper grommet

p/n: 70-0089-28

Grommets, rear bumper. Fully molded rubber. Four and one fourths inch (4-1/4") outside length by two and five sixteenths inch (2-5/16") outside width by one and eleven sixteenths inch (1-11/16") inside hole length by nine sixteenths inch (9/16") inside ho

$72.30/pr.
In Stock
Axle rebound pad

p/n: 70-0210-32

Bottoming pads, rear axle. Rubber block mounts by bracket to rear axle tube.

$70.40/pr.
In Stock
Accelerator pedal service

p/n: 70-1802-40

Accelerator pedal. Black rubber. For brown see our #70-1802-89. Revulcanization service only.Length: 7.375 inches. Width: 2.0 inches.

$69.70/ea.
Call or Email