Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

139 items found matching 1941 Buick Limited 4 door Limousine
Gravel shield

p/n: 50-0439-44

Gravel shield, rear fender. Fully molded with metal backing and attaching tabs.Length: 15.75 inches.

$563.49/pr.
Made to Order Takes 5-7 Days
Window Felt and Run Channel Set

p/n: 90-0141-58

This ten (10) piece Window Felt and Run Channel set includes the inner and outer window felts, upper and lower rigid run channels, and flexible run channels needed to complete two (2) doors.

$285.99/set
Kit
Front Door Vent Window Set

p/n: 90-0368-90

This four (4) piece Front Door Vent Window Set contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$219.69/set
Kit
Steering column floorplate

p/n: 50-0565-36

Floorplate, steering column at floorboard. Black rubber. For brown (tan) see our #50-0565-89. Made with brass core.Length: 9.375 inches. Width: 5.25 inches.

$204.99/ea.
Made to Order Takes 5-7 Days
Brown steering floorplate

p/n: 50-0565-89

Floorplate, steering column at floorboard. Brown (tan) rubber. For black see our #50-0565-36. Made with brass core.Color:brown Length: 9.

$203.29/ea.
Made to Order Takes 5-7 Days
Window Felt and Run Channel Set

p/n: 90-0142-58

This six (6) piece Window Felt and Run Channel set includes the inner and outer window felts and the flexible run channels needed to complete two (2) doors. This set is used for front or rear doors in models without vent windows in the door.

$200.59/set
Kit
Front Door weatherstrip

p/n: 90-0134-72

Door edge weatherstrip with molded corners. This part is the primary door to body weatherstrip. Adhesive is not included in the kits.

$192.89/set
In Stock
Rear Door weatherstrip

p/n: 90-0132-72

Rear door edge weatherstrip. This part is the primary door to body weatherstrip. Includes the perimeter seal for both rear doors and the molded corners. Set consists of four (4) pieces. Kit does not include adhesive. Includes the following components

$189.79/set
In Stock
Front Door Vent Window Weatherstrips

p/n: 38-0018-55

These Front Door Vent Window Weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$176.19/pr.
In Stock
Windshield Gasket

p/n: 70-0524-50

This Windshield Gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit.

$175.99/ea.
In Stock
Hood to Cowl Weatherstrip

p/n: 50-0142-43

This Hood to Cowl Weatherstrip pair is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This left and right seal pair mounts at the rear of the engine bay to seal between the hood and the vehicle body cowl.

$175.39/pr.
Made to Order Takes 5-7 Days
Motor mount service

p/n: 50-0288-11

Motor mount, front. Revulcanization service only.

$169.49/pr.
Call or Email
Transmission mount service

p/n: 50-0315-25

Mounting pad, transmission (also called insulator or support pad). Revulcanization service only.Length: 5.0 inches. Width: 3.4375 inches.

$160.39/ea.
In Stock
Motor mount service

p/n: 50-0309-11

Motor mount, rear. Revulcanization service only. One (1) per car.Width: 10.6875 inches.

$157.99/ea.
Call or Email
Rear Window Gasket

p/n: 70-0789-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$135.49/ea.
In Stock
Taillight mounting pad

p/n: 50-0174-15

Pad, taillight mounting, right and left.Width: 10.5625 inches.

$133.89/pr.
Made to Order Takes 5-7 Days
Parking light mounting pad

p/n: 50-0138-16

Pad, parking light (fender light).Width: 19.125 inches.

$115.79/pr.
In Stock
Door weatherstrip

p/n: 70-0085-73

Weatherstrip, door opening, fits retainer under edge of body sill to form seal when door is closed. Six (6) foot strips.Length: 72.0 inches. Width: 1.

$114.29/pr.
Made to Order Takes 5-7 Days
Trunk Weatherstrip

p/n: 70-0874-84

This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$103.99/ea.
In Stock
Accelerator pedal service

p/n: 70-1660-40

Pedal, accelerator. Black rubber. Revulcanization service only. For brown see our #70-1660-89.Length: 9.0 inches.

$100.59/ea.
Call or Email
Rigid Run Channels

p/n: 70-0536-58

A Rigid Run Channel pair with bright beaded edge, mohair lined channel, die trimmed and round formed at the top. Sold in 29" pairs.

$95.49/pr.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$85.39/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$85.39/ea.
In Stock
Fender Welting with 3/16 Bead - 50 Ft. Roll

p/n: 70-1100-44

A superior quality Fender Welting material constructed of reinforced black vinyl over a vinyl core. Typically used for attaching four (4) fenders to body. Sold in a 50 foot roll.

$85.39/ea.
In Stock
Brown accelerator service

p/n: 70-1660-89

Pedal, accelerator. Brown rubber. Revulcanization service only. For black see our #70-1660-40.Color:brown Length: 9.0 inches.

$84.29/ea.
Call or Email
Fenderskirt edge seal

p/n: 70-0055-45

Seal, fenderskirt edge. Each five (5) foot long. Similar to our #20-0111-44, but thicker.Length: 60.0 inches. Width: .25 inches.

$80.39/pr.
In Stock
Front bumper grommet

p/n: 50-0154-28

Grommets, front bumper. Fully molded rubber. Five and three fourths inch (5-3/4") outside length by two and thirteen sixteenths inch (2-13/16") outside width by two and five sixteenths inch (2-5/16") inside hole length by five eighths inch (5/8") inside h

$80.39/pr.
In Stock
Fenderskirt Edge Seal

p/n: 70-0154-45

Seal, fenderskirt edge, exact copy, trim notch for skirt lock at installation. Compare sketch with your original to be sure. Two (2), five (5) foot strips.

$75.89/pr.
In Stock
Hood bumper

p/n: 50-0326-42

Bumper, hood side pilot. Four (4) piece set required per car. Steel washer vulcanized inside rubber.

$74.19/set
In Stock
Sliding quarter window seal

p/n: 60-0398-78

Weatherstrip, sliding quarter window. Mounted vertically in body where leading edge of sliding window fits when closed. Right & left rubber only.

$72.99/pr.
In Stock
Trunk emblem mounting pad

p/n: 50-0113-17

Mounting pad, trunk ornament, excellent material and workmanship.Width: 11.8125 inches.

$72.99/ea.
Made to Order Takes 5-7 Days
Stabilizer Bar End Link Set

p/n: 70-0567-34

Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt. 5/16"-24NF x 7-5/8" long. Includes metal sleeves, cup washers and rubber grommets.

$66.59/set
In Stock
Rear Bumper Stone Deflector

p/n: 60-0054-73

This Rear Bumper Stone Deflector is a bulb type seal. Made of high-quality EPDM dense rubber and designed from original parts for superior fitment and seal. Twelve (12) foot strip.

$61.79/ea.
In Stock
Window Pinchweld Seal

p/n: 70-0096-52

Pinchweld seal, windshield, to seal and retain outer reveal molding. Used with our #70-1192-52. Twelve (12) foot strip.

$60.89/ea.
In Stock
Rear coil spring pad

p/n: 50-0359-35

Insulators, rear coil spring. Fabric reinforced rubber as original. One (1) pair per car.

$60.59/pr.
In Stock
Brown seat back rest pad

p/n: 70-0482-89

Rest pads, seat back, outer, on two (2) door styles with folding seats. Brown rubber. For black see our #70-0482-88. Self retaining, perfect copy.

$58.69/pr.
Made to Order Takes 5-7 Days
Headlight Door To Lens Seal

p/n: 70-0493-14

Headlight Door To Lens Seal - Molded without wire. Double lip type for sealed beam headlights. Note: Compare with our single lip type #70-0389-14 sold separately.

$58.39/pr.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

$58.39/pr.
In Stock
Cowl vent weatherstrip

p/n: 70-0532-54

Weatherstrip, cowl vent. Labyrinth type as original.

$57.99/ea.
In Stock
Flexible Run Channel

p/n: 70-1239-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$55.99/ea.
In Stock
Parking light lens gasket

p/n: 50-0164-16

Pad, fender parking light lens.Width: 5.125 inches. Height: 2.25 inches.

$55.69/pr.
Made to Order Takes 5-7 Days
Hood rest pad

p/n: 50-0120-42

Pad, hood side center rest.

$55.59/pr.
In Stock
Beltline Weatherstrip

p/n: 70-0555-58

This Beltline Weatherstrip is sold as a three (3) foot pair. The beltline is used for side window inner and/or outer, front and/or rear doors. Available in a 3ft pair.

$55.49/pr.
In Stock
Vent Division Bar Weatherstrip

p/n: 70-2089-56

This Front Vent Division Bar Weatherstrip is fully molded with metal core and attaching tabs.

$55.19/pr.
In Stock
Front suspension bumper

p/n: 50-0091-32

Bumper, front suspension, upper arm.Height: 2.0 inches.

$54.99/pr.
In Stock
Folding seat bumper

p/n: 70-0482-88

Rest pads, seat back, outer, on two (2) door styles with folding seats. Black rubber. For brown see our #70-0482-89. Self retaining, perfect copy.

$54.59/pr.
In Stock
Windshield Division Bar Gasket

p/n: 70-0372-51

This Windshield Division Bar Gasket is designed from the original part for superior fitment and seal. Part is properly sized with "H" section. Part requires fitting to top and bottom, as it is not drilled.

$54.19/ea.
In Stock
Headlight Door To Lens Ring Seals

p/n: 70-0389-14

This Headlight Door To Lens Ring seal pair is designed from the original part for superior fitment and function. The part works to seal between the headlight door housing and the headlight retaining ring. The part is a single lip type seal for sealed beam headlights.

$53.99/pr.
In Stock
Flexible Run Channel

p/n: 70-1238-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$52.89/ea.
In Stock
Cowl vent hose

p/n: 50-0259-54

Hose, cowl vent gutter drain.Length: 7.0 inches.

$52.59/ea.
In Stock