Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

149 items found matching 1941 Chevrolet Special DeLuxe 4 door Sport Sedan
Door opening step pad

p/n: 70-1118-45

Mats, front door opening, with metal backing, proper body contour and attaching holes. Two (2) piece set for both front doors.Length: 30.375 inches.

$397.49/pr.
In Stock
Door opening step pad

p/n: 70-1119-45

Mats, rear door opening, with metal backing, proper body contour and attaching holes. Two (2) piece set for both rear doors.Length: 21.875 inches.

$373.19/pr.
In Stock
Window Felt and Run Channel Set

p/n: 90-0141-58

This ten (10) piece Window Felt and Run Channel set includes the inner and outer window felts, upper and lower rigid run channels, and flexible run channels needed to complete two (2) doors.

$350.20/set
$314.99/set
10% discount
Kit
Front Door Vent Window Set

p/n: 90-0380-90

This front door vent window weatherstrip set is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$246.10/set
$233.69/set
5% discount
Kit
Window Felt and Run Channel Set

p/n: 90-0142-58

This six (6) piece Window Felt and Run Channel set includes the inner and outer window felts and the flexible run channels needed to complete two (2) doors. This set is used for front or rear doors in models without vent windows in the door.

$245.40/set
$220.79/set
10% discount
Kit
Front Door weatherstrip

p/n: 90-0134-72

Door edge weatherstrip with molded corners. This part is the primary door to body weatherstrip. Adhesive is not included in the kits.

$208.39/set
In Stock
Rear Door weatherstrip

p/n: 90-0132-72

Rear door edge weatherstrip. This part is the primary door to body weatherstrip. Includes the perimeter seal for both rear doors and the molded corners. Set consists of four (4) pieces. Kit does not include adhesive. Includes the following components

$204.99/set
In Stock
Motor mount service

p/n: 60-0224-11

Engine mount, side (support cushions), right and left. Side frame bracket to clutch housing bracket. Two (2) per car.Width: 2.5 inches. Height: 1.5 inches.

$198.39/pr.
Call or Email
Front Door Vent Window Weatherstrips

p/n: 38-0037-55

These Front Door Vent Window Weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$185.29/pr.
In Stock
Motor mount service

p/n: 60-0296-11

Cushion, engine mount, front. Revulcanization service only.Length: 3.0 inches. Width: 2.125 inches.

$185.19/pr.
Call or Email
Rear Window Gasket

p/n: 60-0278-81

This Rear Window Gasket mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$164.69/ea.
In Stock
Body to Fender Seal

p/n: 60-0001-45

This Body to Fender Seal pair installs on the right and left of the front body to fender. Length: 22.0 inches.

$151.99/pr.
Made to Order Takes 5-7 Days
Spring seat service

p/n: 60-0619-35

Seat, rear spring. Revulcanization service only. Send in complete casting with metal sleeve bushing.

$141.49/ea.
Call or Email
Rear spring bumper service

p/n: 60-0425-32

Bumpers, rear springs to frame. Revulcanization service only.Length: 3.0 inches. Width: 2.5 inches.

$138.89/pr.
Call or Email
Windshield Gasket

p/n: 70-1534-50

This Windshield Gasket is for windows without chrome reveal molding or divider bar. Mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$130.79/ea.
In Stock
Windshield Gasket

p/n: 60-0186-50

This Windshield Gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit.

$123.59/ea.
In Stock
Transmission Support Mount - Revulcanization Service Only

p/n: 60-0530-25

Insulator - Plate Assembly - Guide for transmission support bracket. This Revulcanization Service Only is designed to restore your transmission mount to a like new original condition. Please call or email for more service details and ordering.

$120.19/ea.
Call or Email
Trunk Weatherstrip

p/n: 70-0874-84

This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$112.39/ea.
In Stock
Trunk Weatherstrip

p/n: 70-0988-84

This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$110.89/ea.
In Stock
Transmission mount service

p/n: 60-0407-25

Insulator (support), transmission mounting. Revulcanization service only.Length: 7.0625 inches.

$101.99/ea.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$93.99/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$93.99/ea.
In Stock
Fender Welting with 3/16 Bead - 50 Ft. Roll

p/n: 70-1100-44

A superior quality Fender Welting material constructed of reinforced black vinyl over a vinyl core. Typically used for attaching four (4) fenders to body. Sold in a 50 foot roll.

$93.99/ea.
In Stock
Fenderskirt edge seal

p/n: 70-0055-45

Seal, fenderskirt edge. Each five (5) foot long. Similar to our #20-0111-44, but thicker.Length: 60.0 inches. Width: .25 inches.

$88.49/pr.
In Stock
Shoe scraper mounting pad

p/n: 60-0325-45

Pad, mounting, boot scraper-to-front fender, right and left.Width: 3.25 inches.

$83.89/pr.
In Stock
Sliding quarter window seal

p/n: 60-0398-78

Weatherstrip, sliding quarter window. Mounted vertically in body where leading edge of sliding window fits when closed. Right & left rubber only.

$80.39/pr.
In Stock
Front bumper grommet

p/n: 60-0003-28

Grommets, front bumper.Length: 3.50 inches.

$78.39/pr.
Made to Order Takes 5-7 Days
Fenderskirt edge seal

p/n: 20-0111-44

Pad, fenderskirt edge, similar to our #70-0055-45, but thinner. Approximately five (5) foot strip per skirt.Length: 60.0 inches. Width: .15625 inches.

$76.79/pr.
In Stock
Front Suspension Rubber Bumper

p/n: 60-0103-32

Front Suspension Rubber Bumper for the front suspension lower control arm (attaches to lower arm spring mount). Steel core, with original size bolt. Width: 1.625 inches.

$74.59/pr.
In Stock
Taillight mounting pad

p/n: 60-0008-15

Mounting pads, taillight.Length: 6.50 inches. Width: 2.6875 inches.

$72.59/pr.
In Stock
Brake and Clutch Pedal Pads

p/n: 60-0068-22

Brake and Clutch Pedal Pads - The proper design and fully detailed with ribs extending down over sides of the pad. Length: 3.50 inches. Width: 2.0 inches.

$71.59/pr.
In Stock
Front Spring Rubber Bumper

p/n: 70-0329-32

Front Spring Rubber Bumper Pair - for upper control arm on frame.

$71.59/pr.
In Stock
Front suspension bumper

p/n: 60-0093-32

Bumper, front lower suspension arm. Attaches to front cross member by carrot retainer.Height: 2.0 inches.

$68.89/pr.
Made to Order Takes 5-7 Days
Rear Gravel Deflector to Bumper Seal

p/n: 60-0020-30

This Rear Gravel Deflector to Bumper Seal is made of a high quality EPDM dense rubber extrusion. Designed from the original part so it fits correctly. Sold as a six (6) foot strip.

$66.99/ea.
Made to Order Takes 5-7 Days
Window Pinchweld Seal

p/n: 70-0096-52

This twelve (12) foot Window Pinchweld Seal is designed from the original part for superior fitment and function. The part is used to seal and retain an outer decorative reveal molding. Used with our 70-1192-52.

$66.99/ea.
In Stock
Accelerator pedal service

p/n: 60-0701-40

Pedal, accelerator. Revulcanization service only. Excellent cover detailing with molded in rod ball socket as original.

$64.99/ea.
Call or Email
Parking light mounting pad

p/n: 60-0007-17

Mounting pads, parking lights.Length: 4.25 inches. Width: 2.375 inches.

$64.69/pr.
Made to Order Takes 5-7 Days
Brown steering column grommet

p/n: 60-0621-89

Grommet, steering column to toe board. Brown rubber. For black see our #60-0621-36.Color:brown Length: 4.25 inches.

$64.39/ea.
In Stock
Headlight Door To Lens Seal

p/n: 70-0493-14

Headlight Door To Lens Seal - Molded without wire. Double lip type for sealed beam headlights. Note: Compare with our single lip type #70-0389-14 sold separately.

$64.29/pr.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

$64.29/pr.
In Stock
Steering column grommet

p/n: 60-0621-36

Grommet, steering column to toe board. Black rubber. For brown see our #60-0621-89.

$62.99/ea.
Made to Order Takes 5-7 Days
Bowtie emblem pedal pad

p/n: 60-0125-22

Pad, clutch and brake pedal, with Chevy bow tie in tread. Perfect copy, sharp detail.

$62.49/pr.
In Stock
Flexible Run Channel

p/n: 70-1239-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$61.69/ea.
In Stock
Beltline Weatherstrip

p/n: 70-0555-58

This Beltline Weatherstrip is sold as a three (3) foot pair. The beltline is used for side window inner and/or outer, front and/or rear doors. Available in a 3ft pair.

$60.99/pr.
In Stock
Vent Division Bar Weatherstrip

p/n: 60-0569-56

This Front Vent Division Bar Weatherstrip is fully molded with metal core and attaching tabs.

$60.79/pr.
In Stock
Stabilizer Bar End Link Set

p/n: 60-0221-33

Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt 3/8"-16 NF x 6-15/16" long. Comes with metal sleeve, metal cup washers and rubber grommets.

$77.89/set
$60.29/set
23% discount
In Stock
Inner Fender Seal

p/n: 60-0288-45

Inner Fender Seal for anti-rattle, running board apron to body, or fender splash panels. Nine sixteenths (9/16) inch by seven eighths (7/8) inch slotted sponge rubber to accept rivets. Sold in eight (8) foot strips.

$59.99/ea.
In Stock
Windshield Division Bar Gasket

p/n: 70-0372-51

This Windshield Division Bar Gasket is designed from the original part for superior fitment and seal. Part is properly sized with "H" section. Part requires fitting to top and bottom, as it is not drilled.

$59.69/ea.
In Stock
Headlight Door To Lens Ring Seals

p/n: 70-0389-14

This Headlight Door To Lens Ring seal pair is designed from the original part for superior fitment and function. The part works to seal between the headlight door housing and the headlight retaining ring. The part is a single lip type seal for sealed beam headlights.

$59.49/pr.
In Stock
Rear spring bushing

p/n: 60-0311-35

Bushing, rear spring front eye, inlox cartridge type as original.

$58.79/ea.
In Stock