Search Results

135 items found matching 1946 Buick Special 4 door Sedan
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Gravel shield

p/n: 50-0439-44

Gravel shield, rear fender. Fully molded with metal backing and attaching tabs.Length: 15.75 inches.

$525.60/pr.
In Stock
Front Door Weatherstrip Kit

p/n: 90-0108-72

Front door weatherstrip kit. This four (4) piece kit is the primary seal for the door to the body. Set includes the door edge weatherstrip with molded corners and hinge post weatherstrip.

$302.50/set
In Stock
Hinge post weatherstrip

p/n: 60-0594-73

Hinge post weatherstrip, front doors

$269.70/pr.
In Stock
Side window run channel kit

p/n: 90-0141-58

This ten (10) piece kit includes the inner and outer windowfelts, upper and lower rigid run channels, and flexible run channels needed to complete two (2) doors. Used for front or rear doors in models with vent windows in the door.

$272.20/set
$245.00/set
10% discount
Kit
Front Door Vent Window Kit

p/n: 90-0368-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$207.30/set
$196.90/set
5% discount
Kit
Motor mount service

p/n: 50-0279-11

Motor mount, front. Two (2) per car. Revulcanization service only.

$182.70/pr.
Call or Email
Rear Door weatherstrip

p/n: 90-0132-72

Rear door edge weatherstrip. This part is the primary door to body weatherstrip. Includes the perimeter seal for both rear doors and the molded corners. Set consists of four (4) pieces. Kit does not include adhesive. Includes the following components

$173.40/set
In Stock
Side window run channel kit

p/n: 90-0142-58

This six (6) piece kit includes the inner and outer windowfelts and flexible run channels needed to complete two (2) doors. Used for front or rear doors in models without vent windows in the door.

$191.80/set
$172.60/set
10% discount
Kit
Front Door Vent Window Weatherstrips

p/n: 38-0018-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$161.20/pr.
In Stock
Windshield Gasket

p/n: 70-0524-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit.

$160.90/ea.
In Stock
Axle rebound pad

p/n: 50-0371-35

Bumper, rear axle. Revulcanization service only.Height: 3.5 inches.

$155.00/pr.
In Stock
Transmission mount service

p/n: 50-0315-25

Mounting pad, transmission (also called insulator or support pad). Revulcanization service only.Length: 5.0 inches. Width: 3.4375 inches.

$146.50/ea.
In Stock
Motor mount service

p/n: 50-0309-11

Motor mount, rear. Revulcanization service only. One (1) per car.Width: 10.6875 inches.

$144.40/ea.
Call or Email
Rear Window Gasket

p/n: 60-0278-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$139.20/ea.
In Stock
Taillight mounting pad

p/n: 50-0121-15

Mounting pads, taillights, right and left.Width: 10.5625 inches.

$95.80/pr.
In Stock
Trunk Weatherstrip

p/n: 70-0988-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$91.80/ea.
In Stock
Rigid run channel

p/n: 70-0536-58

Run channel, front door window, for full length of division bar (approximately twenty nine (29) inches). Rigid, bright beaded edge, mohair lined channel, die trimmed and formed at top.

$85.50/pr.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$76.30/ea.
In Stock
Fenderskirt Edge Seal

p/n: 70-0154-45

Seal, fenderskirt edge, exact copy, trim notch for skirt lock at installation. Compare sketch with your original to be sure. Two (2), five (5) foot strips.

$67.90/pr.
In Stock
Sliding quarter window seal

p/n: 60-0398-78

Weatherstrip, sliding quarter window. Mounted vertically in body where leading edge of sliding window fits when closed. Right & left rubber only.

$65.30/pr.
In Stock
Front Stablizer Bar End Link Kit

p/n: 70-0567-34

Kit, stabilizer bar link assembly. Twenty two (22) piece set for both sides of one (1) car, front and rear. (Order 2 sets if you need both). Hex head bolt. 5/16"-24nf x 7-5/8" lg. Comes with metal sleeve, cup washers and rubber grommets.

$59.50/set
In Stock
Front stabilizer bushing

p/n: 50-0170-34

Bushings, front stabilizer bar mounting. Fits original bracket. Fully molded rubber. One and five eighths inch (1 5/8") length by one and three eighths inch (1 3/8") outside diameter by eleven sixteenths inch (11/16") inside hole diameter.

$59.20/pr.
In Stock
Brown accelerator pedal pad

p/n: 50-0160-89

Pad, accelerator pedal. Brown rubber. For black see our #50-0160-40. Slip-over type for old core, perfect copy.Color:brown Length: 9.0 inches.

$58.00/ea.
In Stock
Clutch equalizer bushing kit

p/n: 70-2029-24

Kit, clutch equalizer bushing & seal. Kit includes metal sleeved rubber bushing and molded rubber seals for each end of equalizer.

$56.10/set
In Stock
Body Anti-Squeak Rubber

p/n: 60-0054-73

Bulb type seal, gravel shield-to-rear bumper, anti-squeak. Also used as a door weatherstrip for some makes and models. Twelve (12) foot strip.

$55.20/ea.
In Stock
Window pinchweld seal

p/n: 70-0096-52

Pinchweld seal, windshield, to seal and retain outer reveal molding. Used with our #70-1192-52. Twelve (12) foot strip.

$54.40/ea.
In Stock
Rear coil spring pad

p/n: 50-0359-35

Insulators, rear coil spring. Fabric reinforced rubber as original. One (1) pair per car.

$54.10/pr.
In Stock
Accelerator pedal pad

p/n: 50-0160-40

Pad, accelerator pedal. Black rubber. For brown see our #50-0160-89. Slip-over type for old core, perfect copy.Length: 9.0 inches.

$52.40/ea.
Made to Order Takes 1-2 Days
Brown seat back rest pad

p/n: 70-0482-89

Rest pads, seat back, outer, on two (2) door styles with folding seats. Brown rubber. For black see our #70-0482-88. Self retaining, perfect copy.

$52.40/pr.
In Stock
Headlight Door To Lens Seal

p/n: 70-0493-14

Headlight Door To Lens Seal - Molded without wire. Double lip type for sealed beam headlights. Note: Compare with our single lip type #70-0389-14 sold separately.

$52.10/pr.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Channel, rigid run, window division bar. Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar.

$52.10/pr.
In Stock
Flexible Run Channel 6 Foot

p/n: 70-1239-58

Window run channel with stainless beaded edge. Six (6) foot length. Cloth covered, mohair lined, flexible channel for sides and top of door windows. Exact replacement for listed vehicles but can be used in many applications.

$48.20/ea.
In Stock
Beltline weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Seven sixteenths (7/16) inch wide, with chrome bead, mohair faced, flexible. Two (2) three (3) foot strips. Bend to fit.

$47.70/pr.
In Stock
Folding seat bumper

p/n: 70-0482-88

Rest pads, seat back, outer, on two (2) door styles with folding seats. Black rubber. For brown see our #70-0482-89. Self retaining, perfect copy.

$46.90/pr.
In Stock
Headlight Door To Lens Seal

p/n: 70-0389-14

Headlight door to lens seal. Molded without wire. Single lip type for sealed beams.

$46.40/pr.
In Stock
Vent division bar weatherstrip

p/n: 70-2089-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$46.10/pr.
In Stock
Front suspension bumper

p/n: 50-0091-32

Bumper, front suspension, upper arm.Height: 2.0 inches.

$46.00/pr.
In Stock
Windshield Division Bar Gasket

p/n: 70-0372-51

Gasket, windshield center post, "H" section, properly sized, requires fitting to top and bottom, not drilled.

$45.30/ea.
In Stock
Brown brake and clutch pad

p/n: 50-0054-89

Pad, brake and clutch pedal. Brown rubber. For black see our part #50-0054-22. Perfect copy, fine detail.Color:brown Width: 3.125 inches.

$44.40/pr.
In Stock
Flexible Run Channel 5 Foot

p/n: 70-1238-58

Window run channel, stainless beaded edge. Cloth covered, mohair lined flexible metal channel for sides and top of door windows. Perfect dimensions, Five eighths (5/8) inch wide by nine sixteenths (9/16) inch overall height, exact replacement. Five (5) fo

$44.30/ea.
In Stock
Sliding Quarter Window Weatherstrip

p/n: 70-0353-78

Weatherstrip, inner and outer for sliding quarter window, chrome beaded, mohair faced, flexible stock. May be formed to required outline. Six (6) foot strip.

$43.50/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$43.40/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$43.40/ea.
In Stock
Front suspension bumper

p/n: 50-0092-32

Bumper, front suspension, lower arm. Steel core, with threaded stud, as original. Two (2) per car required.

$42.70/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$41.80/ea.
In Stock
Door weatherstrip

p/n: 60-0114-73

Weatherstrip, door bottom, sponge constant section, solid skin surface, superior quality. Sold in six (6) foot strips only.Length: 72.0 inches.

$41.60/ea.
In Stock
Horn button contact cushion

p/n: 50-0409-21

Separator, horn contact. For standard or non-flexible wheel.

$41.10/ea.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$39.10/ea.
In Stock
Rigid run channel

p/n: 70-0516-58

Channel, rigid run, lower side window below beltline, zinc plated steel with black cloth lining, one half (1/2) inch deep by one half (1/2) inch wide, fifteen (15) inches long.

$36.10/pr.
In Stock
Door lock weatherstrip

p/n: 50-0172-70

Weatherstrip, door lock, front and rear. Protects door lock mechanism from dust and weather.Length: 3.625 inches.

$34.90/pr.
In Stock
Division bar chrome retainer

p/n: 70-0373-51

Retainer, for outside windshield center post stainless molding. Use with original stainless molding and clips.Length: 15.5 inches. Width: 1.25 inches.

$33.60/ea.
In Stock
License light mounting pad

p/n: 50-0034-17

Pad, rear license light and trunk handle body.Length: 7.50 inches.

$33.00/ea.
In Stock
Brake and clutch shank seal

p/n: 50-0066-24

Grommet, brake and clutch pedal floor seal.Width: 1.8125 inches. Height: 2.375 inches.

$32.50/pr.
In Stock
Brake and clutch pedal pad

p/n: 50-0054-22

Pad, brake and clutch pedal. Black rubber. For brown see our part #50-0054-89. Perfect copy, fine detail.Width: 3.125 inches. Height: 2.125 inches.

$28.80/pr.
In Stock
Front coil spring pad

p/n: 50-0358-35

Insulators, front coil spring. Fabric reinforced rubber as original.

$27.60/pr.
In Stock
Starter solenoid boot

p/n: 70-0371-21

Boot, starter solenoid.

$26.60/ea.
In Stock
Firewall grommet

p/n: 50-0166-20

Grommet, wire harness-thru-firewall mat. Two (2) inch diameter with two and one fourth (2-1/4) inch outside diameter flange.

$24.60/ea.
In Stock
Door check link rod end stop

p/n: 70-0479-70

End nut, check link (rubber bar with steel bar insert). Three fourths (3/4) inch by three fourths (3/4) inch by two (2) inch threaded five sixteenths (5/16) inch. (For round stop nut, see our #70-0326-70).

$24.50/ea.
In Stock
Battery cable boot

p/n: 70-0704-21

Boot, battery cable at starter solenoid.Width: 2.75 inches.

$23.50/ea.
In Stock
Headlight Mounting Pad

p/n: 50-0462-14

Headlight housing to fender gasket. Steel rule die-cut replacement for #1320452.

$21.30/pr.
In Stock
Body mounting pad

p/n: 50-0477-48

Pad, body mounting. Fully molded rubber with metal core & locating collar. One and seven eighths inch (1 7/8") outside diameter by one and one eighths inch (1 1/8") locating collar outside diameter by three fourths inch (3/4") locating collar inside diame

$20.60/ea.
In Stock
Hydraulic pump mounting pad

p/n: 70-0852-67

Pad, mounting, hydraulic pump. Used on models with hydraulic window lifts or hydraulic convertible top. Two (2) to three (3) required. per car.

$19.00/ea.
In Stock
Firewall grommet

p/n: 50-0327-20

Grommet, speedometer cable through firewall (lower).

$18.90/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Ferrule and grommet kit

p/n: 70-0597-69

Ferrule and grommet set, outside door handle. Cadmium plated ferrule with rubber sleeve. Two (2) piece set for one (1) door.

$18.60/set
In Stock
Clutch pedal bumper

p/n: 50-0275-24

Bumper, clutch pedal stop at toe board.Height: 1.375 inches.

$17.40/ea.
In Stock
Window stop stem bumper

p/n: 33-0675-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required. (See sketch and our #33-0540-62).

$15.10/pr.
In Stock
Body mounting pad

p/n: 50-0096-48

Pad, body mounting. Fully molded rubber with steel core and locating collar. Two inch (2") square by one and one eighth inch (1 1/8") locating collar outside diameter by eleven sixteenths inch (11/16") locating collar inside diameter by one half inch (1/2

$14.60/ea.
In Stock
Rear coil spring pad

p/n: 50-0304-35

Insulator, rear coil spring clamp bolt (upper end). Two (2) per car. Fabric reinforced rubber as original.

$14.60/ea.
In Stock
Wiper transmission gasket

p/n: 70-0252-53

Gasket, windshield wiper transmission mounting.

$14.40/pr.
In Stock
Parking/Backup light lens gasket

p/n: 70-1272-16

Gasket, parking light lens and backup light lens. Die cut from one eighth (1/8) inch rubber.

$13.20/pr.
In Stock
Front bumper gravel shield

p/n: 70-0127-30

Gravel shield, front bumper, anti-rattle.

$13.10/ea.
In Stock
Body mounting pad

p/n: 50-0329-48

Pad, body mounting. Under frame bracket for hold-down nut. Fully molded rubber. Check number needed for your particular body. Two inches (2") outside diameter by three fourths inch (3/4") inside hole diameter by three fourths inch (3/4) height. Also see o

$13.00/ea.
In Stock
Firewall grommet

p/n: 50-0531-20

Grommet, oil pressure, water temp, and vacuum line through firewall.

$12.90/ea.
In Stock
Hood bumper

p/n: 34-0311-42

Bumper, hood, fastened to cowl at rear of hood. Steel core. One and eleven sixteenths (1-11/16) inch diameter. Two (2) per car.

$12.00/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.00/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Body mounting pad

p/n: 50-0097-48

Pad, several useages. Use as a body mounting pad or as a cushion for body mounting bolt. Fully molded rubber. Up to twenty (20) required per car. Two inches (2") outside diameter by three fourths inch (3/4") inside hole diameter by one half inch (1/2") he

$10.60/ea.
In Stock
Body mounting pad

p/n: 50-0328-48

Pad, body mounting to frame. Fully molded rubber. Up to twenty (20) required per car. Check number needed for your particular body. Two inch (2") square by five eights inch (5/8") inside hole diameter by seven sixteenths inch (7/16") height.

$10.00/ea.
In Stock
Axle rebound pad

p/n: 50-0302-35

Bushing, rear axle, anti-sway rod ends. Fully molded rubber. Four (4) required per car. One and one fourth inch (1 1/4") top outside diameter by one and one eighth inch (1 1/8") bottom outside diameter by five eighths inch (5/8") inside hole diameter by t

$9.90/ea.
In Stock
Door lock mounting pad

p/n: 27-0020-69

Mounting pad, door lock cylinder, right and left.Length: 1.6875 inches.

$9.10/pr.
In Stock
Door bumper

p/n: 34-0025-42

Bumper, front and rear body hinge pillar, one (1) inch diameter by one fourth (1/4) inch thick, held by screw, steel core. Auxiliary, used only where needed to prevent door rattle.Note: also used on 1942-50 Packards with Clipper styling near t

$7.90/ea.
In Stock
Window stop stem bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$7.90/ea.
In Stock
Tie rod dust cover

p/n: 70-0537-32

Dust cover, tie rod ends.

$7.80/ea.
In Stock
Radiator bracket cushion

p/n: 50-0324-42

Bumper for bracket, radiator upper panel to grill. Use original steel bracket.Buick 1941: 1 required per car. 1942: Part not used for this year.

$7.60/ea.
In Stock
Trunk bumper

p/n: 34-0399-87

Bumper, trunk opening on lid. Metal core, as original, screw held. Two (2) required per car.

$7.60/ea.
In Stock
Trunk Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0490-85

Trunk weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$7.60/ft.
In Stock
Door bumper

p/n: 34-0131-37

Bumper, front door above the upper hinge on the upper radius of the door. Stiff-backed, retained by screw, mounted on door only.

$7.40/ea.
In Stock
Shift lever grommet

p/n: 50-0284-24

Grommet, shift lever insulator. One (1) per car. Three eighths (3/8) inch inside diameter by five eighths (5/8) inch barrel by one half (1/2) inch long.

$7.30/ea.
In Stock
Side window roller

p/n: 70-0117-62

Anti-rattle roller, side windows. Rubber only, replaces original perfectly and easily. Fits both styles of brackets.

$7.30/ea.
In Stock
Brown door lock knob

p/n: 70-0660-70

Knob or push button for inside door lock, fits over 1/8" steel rod to door lock. Hard brown rubber, may be lacquered other colors as required.

$7.00/ea.
In Stock
Trunk Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0412-85

Trunk weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$6.90/ft.
In Stock
Firewall grommet

p/n: 50-0532-20

Grommet, parking brake cable through firewall.

$6.50/ea.
In Stock
Steering knuckle support seal

p/n: 50-0199-35

Seal, steering knuckle support, upper pivot pin. Four (4) required per car.Height: .5 inches.

$6.50/ea.
In Stock
Trunk Weatherstrip

p/n: 50-0161-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.

$6.40/ft.
In Stock
Door weatherstrip

p/n: 40-0168-73

Weatherstrip, hinge post on door or body opening, in area around hinges where irregular cross section is required. Bend and trim to suit requirement.

$6.30/ft.
In Stock
Shock and stabilizer grommet

p/n: 70-0274-33

Grommet, shock and stabilizer link. Eight (8) required per car. Fully molded rubber with locating collar. One and one sixteenth inch (1 1/16") outside diameter by nine sixteenths inch (9/16") locating collar outside diameter by three eighths inch (3/8") i

$6.30/ea.
In Stock
Peel-N-Stick Door Edge Weatherstrip

p/n: 70-0390-WT

Door edge weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Makes for an easier installation of door weatherstripping. Also excellent for use in many different applications and on many different vehicle models.

$6.10/ft.
In Stock