Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

124 items found matching 1949 Buick Special 2 door Sedanet
Gravel shield

p/n: 50-0439-44

Gravel shield, rear fender. Fully molded with metal backing and attaching tabs.Length: 15.75 inches.

$536.19/pr.
In Stock
Front Door Weatherstrip Kit

p/n: 90-0108-72

Front door weatherstrip kit. This four (4) piece kit is the primary seal for the door to the body. Set includes the door edge weatherstrip with molded corners and hinge post weatherstrip.

$308.69/set
In Stock
Hinge post weatherstrip

p/n: 60-0594-73

Hinge post weatherstrip, front doors

$275.19/pr.
In Stock
Side window run channel kit

p/n: 90-0141-58

This ten (10) piece kit includes the inner and outer windowfelts, upper and lower rigid run channels, and flexible run channels needed to complete two (2) doors. Used for front or rear doors in models with vent windows in the door.

$262.69/set
Kit
Front Door Vent Window Kit

p/n: 90-0368-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$204.99/set
Kit
Front Door Vent Window Weatherstrips

p/n: 38-0018-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$165.99/pr.
In Stock
Windshield Gasket

p/n: 70-0524-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit.

$165.79/ea.
In Stock
Axle rebound pad

p/n: 50-0371-35

Bumper, rear axle. Revulcanization service only.Height: 3.5 inches.

$159.79/pr.
In Stock
Motor mount service

p/n: 50-0297-11

Motor mount, front. Revulcanization service only.Qty Required:2 Length: 3.375 inches. Width: 2.625 inches. Height: 1.25 inches.

$143.89/pr.
Call or Email
Rear Window Gasket

p/n: 60-0278-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$143.49/ea.
Made to Order Takes 2-3 Days
Transmission mount service

p/n: 50-0264-25

Support pad, transmission mount (insulator). Revulcanization service only.Length: 5.0 inches. Width: 2.0 inches.

$109.19/ea.
Call or Email
Transmission mount service

p/n: 50-0263-25

Support, transmission (insulator). Revulcanization service only. See also our #50-0262-25, many models use both.Length: 5.0 inches. Width: 1.875 inches.

$105.49/ea.
Call or Email
Transmission mount service

p/n: 50-0262-25

Pad, transmission mounting, thrust. Revulcanization service only. One (1) per car required. See also our #50-0263-25. Many models use both.Length: 7.

$103.59/ea.
Call or Email
Torque ball service

p/n: 50-0190-27

Retainer, torque ball, heavy steel jacket with molded rubber inner collar. Revulcanization service only.

$101.39/ea.
Call or Email
Trunk Weatherstrip

p/n: 70-0873-84

This trunk weatherstrip set is designed from original parts for superior fitment and seal. The seals mount directly to the body and cover the full perimeter of the trunk.

$100.49/set
In Stock
Taillight mounting pad

p/n: 50-0173-15

Pad, taillight mounting, right and left.Width: 10.5625 inches.

$99.69/pr.
Made to Order Takes 1-2 Days
Rigid Run Channel

p/n: 70-0536-58

Rigid, bright beaded edge, mohair lined channel, die trimmed and formed at top. Available in 29" pairs.

$88.99/pr.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$79.49/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$79.49/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$79.49/ea.
In Stock
Trunk Weatherstrip Corners

p/n: 60-0511-85

These trunk weatherstrip corners are designed from the original part for superior fitment and seal. The seals mount to the front corners of the trunk directly to the body.

$73.29/pr.
In Stock
Fenderskirt Edge Seal

p/n: 70-0154-45

Seal, fenderskirt edge, exact copy, trim notch for skirt lock at installation. Compare sketch with your original to be sure. Two (2), five (5) foot strips.

$70.69/pr.
In Stock
Fenderskirt edge seal

p/n: 70-0289-45

Seal, fenderskirt edge. Good quality and workmanship, see sketch for comparison. Ten (10) foot strip.Length: 120.0 inches. Width: .1875 inches.

$69.99/ea.
In Stock
Torque ball boot

p/n: 50-0178-27

Boot, torque ball.

$64.89/ea.
In Stock
Stabilizer Bar End Link Set

p/n: 70-0567-34

Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt. 5/16"-24NF x 7-5/8" long. Includes metal sleeves, cup washers and rubber grommets.

$61.99/set
In Stock
Brown accelerator pedal pad

p/n: 50-0160-89

Pad, accelerator pedal. Brown rubber. For black see our #50-0160-40. Slip-over type for old core, perfect copy.Color:brown Length: 9.0 inches.

$60.39/ea.
In Stock
Clutch equalizer bushing kit

p/n: 70-2029-24

Kit, clutch equalizer bushing & seal. Kit includes metal sleeved rubber bushing and molded rubber seals for each end of equalizer.

$58.39/set
In Stock
Rear coil spring pad

p/n: 50-0359-35

Insulators, rear coil spring. Fabric reinforced rubber as original. One (1) pair per car.

$56.39/pr.
In Stock
Accelerator pedal pad

p/n: 50-0160-40

Pad, accelerator pedal. Black rubber. For brown see our #50-0160-89. Slip-over type for old core, perfect copy.Length: 9.0 inches.

$54.59/ea.
Made to Order Takes 1-2 Days
Brown seat back rest pad

p/n: 70-0482-89

Rest pads, seat back, outer, on two (2) door styles with folding seats. Brown rubber. For black see our #70-0482-88. Self retaining, perfect copy.

$54.59/pr.
Made to Order Takes 1-2 Days
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

$54.29/pr.
In Stock
Folding seat bumper

p/n: 70-0482-88

Rest pads, seat back, outer, on two (2) door styles with folding seats. Black rubber. For brown see our #70-0482-89. Self retaining, perfect copy.

$50.79/pr.
In Stock
Headlight Door To Lens Seal

p/n: 70-0389-14

Headlight door to lens seal. Molded without wire. Single lip type for sealed beams.

$50.19/pr.
In Stock
Vent division bar weatherstrip

p/n: 70-2089-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$49.89/pr.
In Stock
Front suspension bumper

p/n: 50-0091-32

Bumper, front suspension, upper arm.Height: 2.0 inches.

$49.79/pr.
In Stock
Front stabilizer bushing

p/n: 50-0094-34

Bushings, front stabilizer shaft-to-frame or stabilizer shaft, front or rear. Fully molded rubber. One and one half inch (1 1/2") length by one and one half inch (1 1/2") width by eleven sixteenths inch (11/16") inside hole diameter by one and one half in

$48.39/pr.
In Stock
Brown brake and clutch pad

p/n: 50-0054-89

Pad, brake and clutch pedal. Brown rubber. For black see our part #50-0054-22. Perfect copy, fine detail.Color:brown Width: 3.125 inches.

$47.99/pr.
In Stock
Flexible Run Channel

Cloth covered, mohair lined flexible metal channel for sides and top of door windows. Available in 5ft and 6ft lengths.

From $47.89/ea.
View
Beltline Weatherstrip

Weatherstrip, door window inner and outer, front and rear doors. Bend to fit. Available in a 3ft pair and 6ft piece.

From $46.99/ea.
View
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$46.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$46.99/ea.
In Stock
Front suspension bumper

p/n: 50-0092-32

Bumper, front suspension, lower arm. Steel core, with threaded stud, as original. Two (2) per car required.

$46.19/ea.
Made to Order Takes 2-3 Days
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$45.19/ea.
In Stock
Horn button contact cushion

p/n: 50-0409-21

Separator, horn contact. For standard or non-flexible wheel.

$44.49/ea.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$42.29/ea.
In Stock
Rigid Run Channel

p/n: 70-0516-58

Channel, rigid run, lower side window below beltline, zinc plated steel with black cloth lining. Available in 15" pairs.

$38.99/pr.
In Stock
Door lock weatherstrip

p/n: 50-0172-70

Weatherstrip, door lock, front and rear. Protects door lock mechanism from dust and weather.Length: 3.625 inches.

$37.79/pr.
In Stock
Division bar chrome retainer

p/n: 70-0373-51

Retainer, for outside windshield center post stainless molding. Use with original stainless molding and clips.Length: 15.5 inches. Width: 1.25 inches.

$36.39/ea.
In Stock
Brake and clutch shank seal

p/n: 50-0066-24

Grommet, brake and clutch pedal floor seal.Width: 1.8125 inches. Height: 2.375 inches.

$35.19/pr.
In Stock
Brake and clutch pedal pad

p/n: 50-0054-22

Pad, brake and clutch pedal. Black rubber. For brown see our part #50-0054-89. Perfect copy, fine detail.Width: 3.125 inches. Height: 2.125 inches.

$31.19/pr.
In Stock