Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

83 items found matching 1951 Pontiac Chieftain 2 door Coupe - 6 Passenger
Window Felt and Run Channel Set

p/n: 90-0141-58

This ten (10) piece Window Felt and Run Channel set includes the inner and outer window felts, upper and lower rigid run channels, and flexible run channels needed to complete two (2) doors.

$314.99/set
Kit
Front Door Weatherstrip Set

p/n: 90-0111-72

This eight (8) piece Front Door Weatherstrip set is the primary weatherstripping for the doors to the vehicle body. The set includes the door bottom weatherstrip with molded corners, the hinge pillar bellows, the front edge seals, and the door edge weatherstrip.

$268.59/set
In Stock
Front Door Vent Window Set

p/n: 90-0401-90

This front door vent window weatherstrip set is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$226.39/set
Kit
Windshield Gasket

p/n: 60-0150-50

This Windshield Gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it. It also has the slot to accommodate the outer edge's decorative molding.

$206.19/ea.
In Stock
Front Door Vent Window Weatherstrips

p/n: 38-0059-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$177.59/pr.
In Stock
Trunk Weatherstrip

p/n: 70-0870-84

This Trunk Weatherstrip is designed from original parts for superior fitment and seal. The set contains the strips and corners that mount to the body and the strip that mounts to the lid.

$166.99/set
In Stock
Door weatherstrip

p/n: 60-0250-73

Weatherstrip, door bottom and corners, molded right and left. Overall length forty and three fourths (40-3/4) inch per door.

$155.99/pr.
In Stock
Rear Window Gasket

p/n: 60-0284-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding.

$155.59/ea.
In Stock
Engine Mount Service – Revulcanization Only

p/n: 27-0044-11

This Revulcanization Service Only is designed to restore your Rear Engine Support Mount to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.

$151.19/pr.
Call or Email
Engine Mount Service – Revulcanization Only

p/n: 27-0046-11

This Revulcanization Service Only is designed to restore your Rear Engine Support Mount to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.

$136.49/pr.
Call or Email
Engine Mount Service – Revulcanization Only

p/n: 27-0039-11

This Revulcanization Service Only is designed to restore your Front Engine Support Mount to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.

$123.19/ea.
Call or Email
Accelerator Pedal Service - Black

p/n: 27-0082-40

Revulcanization Service Only for Black Rubber Accelerator Pedal Pad. For Brown see our #27-0082-89.

$115.29/ea.
Call or Email
Rigid Run Channels

p/n: 70-0536-58

A Rigid Run Channel pair with bright beaded edge, mohair lined channel, die trimmed and round formed at the top. Sold in 29" pairs.

$104.99/pr.
In Stock
Accelerator Pedal Service - Brown

p/n: 27-0082-89

Revulcanization Service Only for Brown Rubber Accelerator Pedal Pad. For Black see our #27-0082-40.

$92.99/ea.
Call or Email
Door weatherstrip

p/n: 60-0517-73

Weatherstrip, front door hinge pillar at beltline. Fourteen and one half (14-1/2) inches long, molded right and left.Length: 13.75 inches.

$92.99/pr.
In Stock
Weatherstrip body hinge pillar

p/n: 60-0320-73

Weatherstrip body hinge pillar

$92.49/pr.
In Stock
Rear Axle Bumpers

p/n: 70-0210-32

This Rear Axle Bumper pair is a quality reproduction of the original factory part. These bottoming pads are dense rubber blocks that mount by bracket to the rear axle tube.

$86.69/pr.
In Stock
Trunk Weatherstrip Corners

p/n: 60-0511-85

These trunk weatherstrip corners are designed from the original part for superior fitment and seal. The seals mount to the front corners of the trunk directly to the body.

$86.69/pr.
In Stock
Fenderskirt Edge Seal

p/n: 70-0154-45

Seal, fenderskirt edge, exact copy, trim notch for skirt lock at installation. Compare sketch with your original to be sure. Two (2), five (5) foot strips.

$83.59/pr.
In Stock
Sliding quarter window seal

p/n: 70-2162-78

Weatherstrip, sliding quarter window. Vertically mounted in body where leading edge of sliding quarter window fits when closed.Length: 13.75 inches.

$80.39/pr.
Made to Order Takes 5-7 Days
Stabilizer Bar End Link Set

p/n: 70-0567-34

Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt. 5/16"-24NF x 7-5/8" long. Includes metal sleeves, cup washers and rubber grommets.

$73.29/set
In Stock
Stabilizer bushing

p/n: 27-0085-34

Bushings, for stabilizer bracket. Fully molded rubber. Correct dimensions, not an aftermarket replacement. One and three fourths inch (1 3/4') length by one and three eighths inch (1 3/8") width by three fourths inch (3/4") inside hole diameter by one and

$64.99/pr.
In Stock
Headlight Door To Lens Seal

p/n: 70-0493-14

Headlight Door To Lens Seal - Molded without wire. Double lip type for sealed beam headlights. Note: Compare with our single lip type #70-0389-14 sold separately.

$64.29/pr.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

$64.29/pr.
In Stock
Flexible Run Channel

p/n: 70-1239-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$61.69/ea.
In Stock
Beltline Weatherstrip

p/n: 70-0555-58

This Beltline Weatherstrip is sold as a three (3) foot pair. The beltline is used for side window inner and/or outer, front and/or rear doors. Available in a 3ft pair.

$60.99/pr.
In Stock
Vent division bar weatherstrip

p/n: 60-0494-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$60.79/pr.
In Stock
Headlight Door To Lens Ring Seals

p/n: 70-0389-14

This Headlight Door To Lens Ring seal pair is designed from the original part for superior fitment and function. The part works to seal between the headlight door housing and the headlight retaining ring. The part is a single lip type seal for sealed beam headlights.

$59.49/pr.
In Stock
Hood to Cowl Weatherstrip

p/n: 27-0075-42

This Hood to Cowl Weatherstrip mounts around the rear of the engine bay to seal between the hood and vehicle body cowl. The pair is twenty-one (21) inches in length and nine-sixteenths (9/16) inch in width to provide complete coverage.

$58.89/pr.
In Stock
Flexible Run Channel

p/n: 70-1238-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$58.29/ea.
In Stock
Front suspension bumper

p/n: 50-0092-32

Bumper, front suspension, lower arm. Steel core, with threaded stud, as original. Two (2) per car required.

$56.19/ea.
Made to Order Takes 5-7 Days
Headlight Mounting Pad

p/n: 70-0201-14

Headlight body mounting gasket. Rubber.

$54.19/pr.
In Stock
Side Window Sash Channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$51.69/ea.
In Stock
Rigid Run Channel

p/n: 70-0516-58

Channel, rigid run, lower side window below beltline, zinc plated steel with black cloth lining. Available in 15" pairs.

$47.39/pr.
In Stock
Brake Master Cylinder Push Rod Boot

p/n: 60-0180-24

This Brake Master Cylinder Push Rod Boot is made from high-quality Nitrile rubber for a precise, factory like fit for your classic vehicle. Manufactured to OEM specifications to install for an authentic fit and finish.

$36.39/ea.
Made to Order Takes 5-7 Days
Parking light gasket

p/n: 27-0076-16

Gasket, parking light housing.Length: 6.25 inches.

$34.99/pr.
Made to Order Takes 5-7 Days
Backup light gasket

p/n: 27-0077-15

Gasket, back-up light housing.

$30.99/pr.
Made to Order Takes 5-7 Days
Battery Clamp Cover

p/n: 70-0095-21

This black rubber Battery Clamp Cover helps to protect the nearby metal and finish. Good copy from an original part. Length: 3-1/2" inches.

$24.89/ea.
In Stock
Antenna mount pad

p/n: 60-0631-21

Pad, antenna mounting for manually operated antennas.

$22.59/ea.
In Stock
Window Stop Stem Bumper

p/n: 33-0675-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$19.99/pr.
In Stock
Solenoid plunger boot

p/n: 60-0567-21

Boot, solenoid plunger, starter switch at starter.Height: 1.625 inches.

$19.89/ea.
In Stock
Parking/Backup light lens gasket

p/n: 70-1272-16

Gasket, parking light lens and backup light lens. Die cut from one eighth (1/8) inch rubber.

$17.69/pr.
In Stock
Dimmer Switch Grommet

p/n: 40-0083-88

Steele Rubber Products offers the best quality Dimmer Switch Grommet for your classic vehicle. This universal fit dimmer switch grommet is used during carpet installations in automotive restorations. Includes a wide flange for floor dimmer switch fitments.

$14.79/ea.
In Stock
Masticated Rubber Sheet

p/n: 70-0645-45

This Masticated Rubber Sheet is three thirty seconds (3/32) inch thick. The rubber sheet contains random milled cotton cord reinforcement for front end splash aprons, etc.

$14.59/sqf
In Stock
Door Handle Gasket Set

p/n: 60-0673-69

This Door Handle Gasket Set is designed from the original part for superior fitment and seal. This six (6) piece gasket set will do two (2) doors.

$14.29/set
In Stock
Wiring grommet

p/n: 70-0355-14

Grommet, electric wire into light body under fenders, for headlights, taillights, some parking lights and auxiliary (fog) lights. Fits seven eighths (7/8) inch hole in light body. Two (2) to eight (8) per car as required.

$14.29/ea.
In Stock
Wiper transmission gasket

p/n: 27-0052-53

Gasket, windshield wiper transmission made of the highest quality and authenticity. Replaces #4562197.

$14.19/pr.
In Stock
Window Stop Stem Bumper

p/n: 33-0622-62

Bumper, window stop. One and one fourth (1-1/4) inch square by one half (1/2) inch thick. Compare with our #33-0540-62 and #33-0675-62.

$12.79/ea.
In Stock
Door bumper

p/n: 50-0203-41

Bumper, fuel filler door, rear fender. With steel core, screw retained two (2) per car.Width: .5 inches. Height: .625 inches.

$10.89/pr.
In Stock
Window Stop Stem Bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$10.79/ea.
In Stock