Search Results

82 items found matching 1951 Pontiac Chieftain 2 door Sedan - 6 Passenger
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Side window run channel kit

p/n: 90-0141-58

This ten (10) piece kit includes the inner and outer windowfelts, upper and lower rigid run channels, and flexible run channels needed to complete two (2) doors. Used for front or rear doors in models with vent windows in the door.

$272.20/set
$245.00/set
10% discount
Kit
Front Door Weatherstrip Kit

p/n: 90-0111-72

Front door weatherstrip kit. This eight (8) piece kit is the primary seal for the door to the body. Set includes the door bottom with molded corners, hinge pillar bellows, front edge seals, and door edge weatherstrip.

$236.10/set
In Stock
Front Door Vent Window Kit

p/n: 90-0401-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$196.30/set
$186.50/set
5% discount
Kit
Windshield Gasket

p/n: 60-0150-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.

$174.40/ea.
In Stock
Front Door Vent Window Weatherstrips

p/n: 38-0059-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$150.20/pr.
In Stock
Trunk Weatherstrip

p/n: 70-0870-84

This trunk weatherstrip set is designed from original parts for superior fitment and seal. The set contains the strips and corners that mount to the body and the strip that mounts to the lid.

$141.30/set
In Stock
Rear Window Gasket

p/n: 60-0268-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding.

$134.20/ea.
Made to Order Takes 2-3 Days
Door weatherstrip

p/n: 60-0250-73

Weatherstrip, door bottom and corners, molded right and left. Overall length forty and three fourths (40-3/4) inch per door.

$132.00/pr.
Made to Order Takes 2-3 Days
Motor mount service

p/n: 27-0044-11

Insulator, engine support rear, right and left. For models with a manual transmission. Revulcanization service only.

$127.80/pr.
Call or Email
Motor mount service

p/n: 27-0046-11

Insulator, engine support rear, right and left. For models with a Hydro-matic transmission. Revulcanization service only.

$115.20/pr.
Call or Email
Motor mount service

p/n: 27-0039-11

Insulator, engine support front. One (1) per car. Revulcanization service only.Length: 5.625 inches.

$104.10/ea.
Call or Email
Accelerator pedal service

p/n: 27-0082-40

Accelerator pedal. Black rubber. For brown see our #27-0082-89. Revulcanization service only.Length: 11.0 inches.

$96.40/ea.
Call or Email
Rigid run channel

p/n: 70-0536-58

Run channel, front door window, for full length of division bar (approximately twenty nine (29) inches). Rigid, bright beaded edge, mohair lined channel, die trimmed and formed at top.

$85.50/pr.
In Stock
Door weatherstrip

p/n: 60-0517-73

Weatherstrip, front door hinge pillar at beltline. Fourteen and one half (14-1/2) inches long, molded right and left.Length: 13.75 inches.

$75.80/pr.
In Stock
Brown accelerator service

p/n: 27-0082-89

Accelerator pedal. Brown rubber. For black see our #27-0082-40. Revulcanization service only.

$75.70/ea.
Call or Email
Weatherstrip body hinge pillar

p/n: 60-0320-73

Weatherstrip body hinge pillar

$75.30/pr.
In Stock
Axle rebound pad

p/n: 70-0210-32

Bottoming pads, rear axle. Rubber block mounts by bracket to rear axle tube.

$70.40/pr.
In Stock
Trunk Weatherstrip Corners

p/n: 60-0511-85

These trunk weatherstrip corners are designed from the original part for superior fitment and seal. The seals mount to the front corners of the trunk directly to the body.

$70.40/pr.
In Stock
Fenderskirt Edge Seal

p/n: 70-0154-45

Seal, fenderskirt edge, exact copy, trim notch for skirt lock at installation. Compare sketch with your original to be sure. Two (2), five (5) foot strips.

$67.90/pr.
In Stock
Front Stablizer Bar End Link Kit

p/n: 70-0567-34

Kit, stabilizer bar link assembly. Twenty two (22) piece set for both sides of one (1) car, front and rear. (Order 2 sets if you need both). Hex head bolt. 5/16"-24nf x 7-5/8" lg. Comes with metal sleeve, cup washers and rubber grommets.

$59.50/set
In Stock
Stabilizer bushing

p/n: 27-0085-34

Bushings, for stabilizer bracket. Fully molded rubber. Correct dimensions, not an aftermarket replacement. One and three fourths inch (1 3/4') length by one and three eighths inch (1 3/8") width by three fourths inch (3/4") inside hole diameter by one and

$52.70/pr.
In Stock
Headlight Door To Lens Seal

p/n: 70-0493-14

Headlight Door To Lens Seal - Molded without wire. Double lip type for sealed beam headlights. Note: Compare with our single lip type #70-0389-14 sold separately.

$52.10/pr.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Channel, rigid run, window division bar. Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar.

$52.10/pr.
In Stock
Flexible Run Channel 6 Foot

p/n: 70-1239-58

Window run channel with stainless beaded edge. Six (6) foot length. Cloth covered, mohair lined, flexible channel for sides and top of door windows. Exact replacement for listed vehicles but can be used in many applications.

$48.20/ea.
In Stock
Beltline weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Seven sixteenths (7/16) inch wide, with chrome bead, mohair faced, flexible. Two (2) three (3) foot strips. Bend to fit.

$47.70/pr.
In Stock
Headlight Door To Lens Seal

p/n: 70-0389-14

Headlight door to lens seal. Molded without wire. Single lip type for sealed beams.

$46.40/pr.
In Stock
Vent division bar weatherstrip

p/n: 60-0494-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$46.10/pr.
In Stock
Hood to cowl weatherstrip

p/n: 27-0075-42

Anti-squeak, hood-to-cowl ledge. Proper extrusion cut twenty one (21) inches with attaching holes punched.Length: 21.25 inches. Width: .5625 inches.

$44.70/pr.
Made to Order Takes 2-3 Days
Flexible Run Channel 5 Foot

p/n: 70-1238-58

Window run channel, stainless beaded edge. Cloth covered, mohair lined flexible metal channel for sides and top of door windows. Perfect dimensions, Five eighths (5/8) inch wide by nine sixteenths (9/16) inch overall height, exact replacement. Five (5) fo

$44.30/ea.
In Stock
Front suspension bumper

p/n: 50-0092-32

Bumper, front suspension, lower arm. Steel core, with threaded stud, as original. Two (2) per car required.

$42.70/ea.
In Stock
Headlight Mounting Pad

p/n: 70-0201-14

Headlight body mounting gasket. Rubber.

$41.10/pr.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$39.10/ea.
In Stock
Rigid run channel

p/n: 70-0516-58

Channel, rigid run, lower side window below beltline, zinc plated steel with black cloth lining, one half (1/2) inch deep by one half (1/2) inch wide, fifteen (15) inches long.

$36.10/pr.
In Stock
Brake master cylinder boot

p/n: 60-0180-24

Boot, brake master cylinder rod. Fits on one and one fourth (1-1/4) inch diameter cylinder. Height: 2.125 inches.

$27.60/ea.
In Stock
Parking light gasket

p/n: 27-0076-16

Gasket, parking light housing.Length: 6.25 inches.

$26.40/pr.
Made to Order Takes 2-3 Days
Backup light gasket

p/n: 27-0077-15

Gasket, back-up light housing.

$23.40/pr.
Made to Order Takes 2-3 Days
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Antenna mount pad

p/n: 60-0631-21

Pad, antenna mounting for manually operated antennas.

$16.90/ea.
In Stock
Window stop stem bumper

p/n: 33-0675-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required. (See sketch and our #33-0540-62).

$15.10/pr.
In Stock
Solenoid plunger boot

p/n: 60-0567-21

Boot, solenoid plunger, starter switch at starter.Height: 1.625 inches.

$14.90/ea.
In Stock
Parking/Backup light lens gasket

p/n: 70-1272-16

Gasket, parking light lens and backup light lens. Die cut from one eighth (1/8) inch rubber.

$13.20/pr.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.00/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Door handle gasket kit

p/n: 60-0673-69

Gasket set, front or rear doors. Six (6) piece set for two (2) handles.

$10.60/set
In Stock
Wiring grommet

p/n: 70-0355-14

Grommet, electric wire into light body under fenders, for headlights, taillights, some parking lights and auxiliary (fog) lights. Fits seven eighths (7/8) inch hole in light body. Two (2) to eight (8) per car as required.

$10.60/ea.
In Stock
Wiper transmission gasket

p/n: 27-0052-53

Gasket, windshield wiper transmission made of the highest quality and authenticity. Replaces #4562197.

$10.50/pr.
In Stock
Window stop stem bumper

p/n: 33-0622-62

Bumper, window stop. One and one fourth (1-1/4) inch square by one half (1/2) inch thick. Compare with our #33-0540-62 and #33-0675-62.Length: 1.

$9.50/ea.
In Stock
Door bumper

p/n: 50-0203-41

Bumper, fuel filler door, rear fender. With steel core, screw retained two (2) per car.Width: .5 inches. Height: .625 inches.

$8.00/pr.
In Stock
Window stop stem bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$7.90/ea.
In Stock
Tie rod dust cover

p/n: 70-0537-32

Dust cover, tie rod ends.

$7.80/ea.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0492-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$7.40/ft.
In Stock
Side window roller

p/n: 70-0117-62

Anti-rattle roller, side windows. Rubber only, replaces original perfectly and easily. Fits both styles of brackets.

$7.30/ea.
In Stock
Wiper control grommet

p/n: 60-0197-53

Grommet, wiper control connection link. Replaces #4161287. 11/32" I.D. X 19/32" O.D.

$7.30/ea.
In Stock
Brown door lock knob

p/n: 70-0660-70

Knob or push button for inside door lock, fits over 1/8" steel rod to door lock. Hard brown rubber, may be lacquered other colors as required.

$7.00/ea.
In Stock
Trunk Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0463-85

Trunk weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$6.90/ft.
In Stock
Brown door lock knob

p/n: 70-0354-70

Knob for inside door lock control rod. Neutral brown color rubber, 3/32 inch hole. See also our #70-0660-70.

$6.30/ea.
In Stock
Door Weatherstrip

p/n: 70-0491-73

Weatherstrip, door edge. Fine grain sponge. Larger type used on most GM cars this period. Width: 13/16". Height: 11/16".

$6.30/ft.
In Stock
Shock and stabilizer grommet

p/n: 70-0274-33

Grommet, shock and stabilizer link. Eight (8) required per car. Fully molded rubber with locating collar. One and one sixteenth inch (1 1/16") outside diameter by nine sixteenths inch (9/16") locating collar outside diameter by three eighths inch (3/8") i

$6.30/ea.
In Stock
Trunk Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 60-0411-85

Trunk weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$6.30/ft.
In Stock
Pressure ring

p/n: 70-0261-69

Pressure ring (washer), sponge rubber, interior door handle and window regulator escutcheon. One and three fourths (1-3/4) inches outside diameter by three eighths (3/8) inch thick.

$5.90/ea.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
In Stock
Channel filler weatherstrip

p/n: 70-0489-58

Weatherstrip, channel filler, door window sash channel and some quarter window sash channel. Special type with wide weatherstrip edge to be trimmed at assembly, when necessary.

$5.49/ft.
In Stock
Door weatherstrip

p/n: 70-0219-73

Weatherstrip, door edge, constant section on some models. Five eighths (5/8) inch by (5/8) inch cross-section, high grade, fine grain sponge rubber.

$5.30/ft.
In Stock
Firewall grommet

p/n: 35-0515-20

Grommet, floor pan, rear compartment and body.

$4.70/ea.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Firewall retainer

p/n: 60-0586-20

Retainer, firewall insulation panel. "Christmas Tree" style popular during this time. Constructed of vinyl plastic. Up to ten (10) required per car.

$4.60/ea.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Shock absorber bushing

p/n: 70-0541-33

Bushing, shock absorber mounting. Five eighths (5/8) inch hole, one and one fourth (1-1/4) inch outside diameter, five eighths (5/8) inch thick.

$4.10/ea.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Shock absorber bushing

p/n: 70-0547-32

Bushing, shock absorber mounting. Double cone style, rear. Five eighths (5/8) inch hole, one and one sixteenths (1-3/16) inch outside diameter, three fourth (3/4) inch thick.

$3.50/ea.
In Stock
Sash channel weatherstrip

p/n: 70-0585-58

Weatherstrip, sash channel, outer, for side windows, one half (1/2) inch wide weatherlip (cross section).Width: .50 inches.

$3.40/ft.
In Stock
Gearshift bushing

p/n: 32-0051-24

Insulator (bushing). Gearshift selector rod. Sheet Metal Hole: 9/16" Center Hole: 3/8" Outside Diameter: 5/8" Slot Width: 5/32"

$3.30/ea.
In Stock
Trunk floor pan plug

p/n: 35-0070-87

Plug, trunk and floor pan drain hole. Buick 1950-65 Plug, trunk and floor pan drain hole.

$3.20/ea.
In Stock
Gearshift grommet

p/n: 32-0050-24

Grommet, insulator, gearshift control rod. Sheet Metal Hole: 11/16" Center Hole: 15/32" Outside Diameter: 3/4" Slot Width: 1/4"

$3.10/ea.
In Stock
Hood bumper

p/n: 70-0294-42

Bumper, hood rest, cap type for adjustable screw, fifteenth sixteenths (15/16) inch, seven sixteenths (7/16) inch thick.

$3.00/ea.
In Stock
Hood & Door bumper

p/n: 33-0459-42

Bumper, hood to cowl and door hinge pillar upper. May be used in both places.

$2.90/ea.
In Stock
Standard bumper

p/n: 33-0496-71

Bumper, used at door opening at upper corner, license plate, and/or fuel filler door. Self-retaining type.

$2.60/ea.
In Stock
Hood bumper

p/n: 33-0003-42

Bumper, hood, 2 uses. Hood to radiator shell at side panel, Hood to fender, as required. Up to ten (10) required per car.Buick requires six (6) per car.

$2.40/ea.
In Stock
Chrome molding washer

p/n: 60-0727-45

Washer, for attaching chrome moldings on body. Fits into metal cup retainer. Three fourths (3/4) inch diameter, use as required.

$2.10/ea.
In Stock
Glovebox and Fuel Filler Door Bumper

p/n: 33-0127-41

Glovebox and Fuel Filler Door Bumper

$1.30/ea.
In Stock
Standard Bumper

p/n: 33-0128-88

Standard Bumper - Commonly used for fuel filler or glovebox doors.

$1.00/ea.
In Stock