Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

64 items found matching 1954 Pontiac Chieftain 4 door Wagon - 2 seat
Window Felt and Run Channel Set

p/n: 90-0141-58

This ten (10) piece Window Felt and Run Channel set includes the inner and outer window felts, upper and lower rigid run channels, and flexible run channels needed to complete two (2) doors.

$368.00/set
$330.99/set
10% discount
Kit
Front Door Vent Window Set

p/n: 90-0407-90

This front door vent window weatherstrip set is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$250.50/set
$237.89/set
5% discount
Kit
Front Door Vent Window Weatherstrips

p/n: 38-0067-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$186.59/pr.
In Stock
Front or Rear Door Seals

p/n: 60-0595-72

Door edge weatherstrip, front or rear door. This part is the primary door to body weatherstrip. Two strips fourteen (14') feet each. Glue in type. Used on the front doors for Buick, Oldsmobile & Pontiac models.

$182.39/pr.
In Stock
Windshield Gasket

p/n: 25-0047-50

This Windshield Gasket mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends. It also has the slot to accommodate the outer edge's decorative molding.

$179.59/ea.
In Stock
Engine Mount Service – Revulcanization Only

p/n: 27-0044-11

This Revulcanization Service Only is designed to restore your Rear Engine Support Mount to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.

$158.79/pr.
Call or Email
Engine Mount Service – Revulcanization Only

p/n: 27-0046-11

This Revulcanization Service Only is designed to restore your Rear Engine Support Mount to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.

$143.39/pr.
Call or Email
Engine Mount Service – Revulcanization Only

p/n: 27-0039-11

This Revulcanization Service Only is designed to restore your Front Engine Support Mount to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.

$129.39/ea.
Call or Email
Accelerator Pedal Service - Black

p/n: 27-0082-40

Revulcanization Service Only for Black Rubber Accelerator Pedal Pad. For Brown see our #27-0082-89.

$121.19/ea.
Call or Email
Front Suspension Bumper

p/n: 27-0080-32

This Front Suspension Bumper, front suspension lower A-arm, is made from high-quality EPDM rubber for a precise, factory fit.

$116.29/pr.
Made to Order Takes 5-7 Days
Rigid Run Channels

p/n: 70-0536-58

A Rigid Run Channel pair with bright beaded edge, mohair lined channel, die trimmed and round formed at the top. Sold in 29" pairs.

$110.29/pr.
In Stock
Rear Window Gasket

p/n: 60-0469-81

This Rear Window Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$109.19/ea.
In Stock
Accelerator Pedal Service - Brown

p/n: 27-0082-89

Revulcanization Service Only for Brown Rubber Accelerator Pedal Pad. For Black see our #27-0082-40.

$97.69/ea.
Call or Email
Rear Axle Bumpers

p/n: 70-0210-32

This Rear Axle Bumper pair is a quality reproduction of the original factory part. These bottoming pads are dense rubber blocks that mount by bracket to the rear axle tube.

$90.99/pr.
In Stock
Fenderskirt Edge Seal

p/n: 70-0154-45

Seal, fenderskirt edge, exact copy, trim notch for skirt lock at installation. Compare sketch with your original to be sure. Two (2), five (5) foot strips.

$87.89/pr.
In Stock
Stabilizer bushing

p/n: 27-0085-34

Bushings, for stabilizer bracket. Fully molded rubber. Correct dimensions, not an aftermarket replacement. One and three fourths inch (1 3/4') length by one and three eighths inch (1 3/8") width by three fourths inch (3/4") inside hole diameter by one and

$68.29/pr.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

$67.59/pr.
In Stock
Flexible Run Channel

p/n: 70-1239-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$64.89/ea.
In Stock
Beltline Weatherstrip

p/n: 70-0555-58

This Beltline Weatherstrip is sold as a three (3) foot pair. The beltline is used for side window inner and/or outer, front and/or rear doors. Available in a 3ft pair.

$63.99/pr.
In Stock
Vent division bar weatherstrip

p/n: 60-0494-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$63.89/pr.
In Stock
Flexible Run Channel

p/n: 70-1238-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$61.29/ea.
In Stock
Headlight Mounting Pad

p/n: 70-0201-14

Headlight body mounting gasket. Rubber.

$56.99/pr.
In Stock
Side Window Sash Channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$54.39/ea.
In Stock
Rigid Run Channel

p/n: 70-0516-58

Channel, rigid run, lower side window below beltline, zinc plated steel with black cloth lining. Available in 15" pairs.

$49.89/pr.
In Stock
Body mounting pad

p/n: 27-0092-48

Insulator, body mounting pad. Metal core & locating collar covered with rubber. Two inch (2") square by fifteen sixteenths inch (15/16") locating collar outside diameter by five eighths inch (5/8") locating collar inside hole diameter. Seven sixteenths in

$30.19/ea.
In Stock
Stabilizer Bar End Link Set

p/n: 60-0221-33

Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt 3/8"-16 NF x 6-15/16" long. Comes with metal sleeve, metal cup washers and rubber grommets.

$27.89/set
In Stock
Battery Clamp Cover

p/n: 70-0095-21

This black rubber Battery Clamp Cover helps to protect the nearby metal and finish. Good copy from an original part. Length: 3-1/2" inches.

$26.19/ea.
In Stock
Solenoid plunger boot

p/n: 60-0567-21

Boot, solenoid plunger, starter switch at starter.Height: 1.625 inches.

$20.99/ea.
In Stock
Window Stop Stem Bumper

p/n: 33-0675-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$20.99/pr.
In Stock
1-3/16" Standard Grommet

p/n: 32-0328-54

This Standard Grommet is fully molded and designed from the original part for superior fitment and seal. This grommet is made from high-quality EPDM dense rubber to provide excellent durability.

$20.39/pr.
In Stock
Dimmer Switch Grommet

p/n: 40-0083-88

Steele Rubber Products offers the best quality Dimmer Switch Grommet for your classic vehicle. This universal fit dimmer switch grommet is used during carpet installations in automotive restorations. Includes a wide flange for floor dimmer switch fitments.

$15.59/ea.
In Stock
Masticated Rubber Sheet

p/n: 70-0645-45

This Masticated Rubber Sheet is three thirty seconds (3/32) inch thick. The rubber sheet contains random milled cotton cord reinforcement for front end splash aprons, etc.

$15.39/sqf
In Stock
Wiper transmission gasket

p/n: 60-0402-53

Gasket, windshield wiper transmission mounting. Replaces #4597009. Two (2) required per car.

$14.99/pr.
In Stock
Wiring grommet

p/n: 70-0355-14

Grommet, electric wire into light body under fenders, for headlights, taillights, some parking lights and auxiliary (fog) lights. Fits seven eighths (7/8) inch hole in light body. Two (2) to eight (8) per car as required.

$14.99/ea.
In Stock
Window Stop Stem Bumper

p/n: 33-0622-62

Bumper, window stop. One and one fourth (1-1/4) inch square by one half (1/2) inch thick. Compare with our #33-0540-62 and #33-0675-62.

$13.49/ea.
In Stock
Window Stop Stem Bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$11.39/ea.
In Stock
Tie rod dust cover

p/n: 70-0537-32

Dust cover, tie rod ends.

$11.19/ea.
In Stock
Body Bolt Cushion

p/n: 60-0189-48

Pad, for each body bolt under frame bracket, to cushion washer and nut. Fully molded rubber. One and seven eighths inch (1 7/8") outside diameter by seven eighths inch (7/8") inside hole diameter by nine sixteenths inch (9/16) height.

$10.99/ea.
In Stock
Side window roller

p/n: 70-0117-62

Anti-rattle roller, side windows. Rubber only, replaces original perfectly and easily. Fits both styles of brackets.

$10.49/ea.
In Stock
Brown Door Lock Knob

p/n: 70-0660-70

This is the Knob or push button for the inside door lock. The part fits over 1/8" steel rod to door lock. Neutral brown color that may be lacquered with other colors as required. A hard rubber part fits many different vehicles.

$9.99/ea.
In Stock
11/16" Door Weatherstrip

p/n: 70-0491-73

This Door Weatherstrip for the side window is made of an extruded sponge rubber. The weatherstrip is the larger type that is used on most GM cars this period. Available by the foot.

$9.19/ft.
In Stock
Brown Door Lock Knob

p/n: 70-0354-70

This is the knob or button for the inside door lock control rod. Neutral brown color rubber, 3/32 inch hole. The part fits many different vehicles.

$9.19/ea.
In Stock
Shock and stabilizer grommet

p/n: 70-0274-33

Grommet, shock and stabilizer link. Eight (8) required per car. Fully molded rubber with locating collar. One and one sixteenth inch (1 1/16") outside diameter by nine sixteenths inch (9/16") locating collar outside diameter by three eighths inch (3/8") i

$9.19/ea.
In Stock
5/8" Door Weatherstrip

p/n: 70-0219-73

The Door Weatherstrip is designed for 1941-1957 GM and Mopar vehicles but with its generic shape it has many uses outside of its original purpose. Available by the foot.

$7.79/ft.
In Stock
1" Floor Pan Grommet

p/n: 35-0515-20

This Floor Pan Grommet is fully molded and designed from the original part for superior fitment and seal. This grommet is made from high-quality EPDM dense rubber to provide excellent durability.

$6.99/ea.
In Stock
1/16" Cork Sash Channel Filler

p/n: 70-1115-57

Cork sash channel filler. Available by the foot.

$6.99/ft.
In Stock
Firewall retainer

p/n: 60-0586-20

Retainer, firewall insulation panel. "Christmas Tree" style popular during this time. Constructed of vinyl plastic. Up to ten (10) required per car.

$6.79/ea.
In Stock
1/16" Sash Channel Filler

p/n: 70-2170-57

Sash channel filler. Available by the foot.

$6.19/ft.
In Stock
Door Lock Bumper

p/n: 34-0484-71

Bumper, door lock post, upper, one half (1/2) inch diameter by one half (1/2) inch tall, plated screw.Height: .50 inches.

$6.19/ea.
In Stock
Door or Tailgate Bumper

p/n: 33-1228-71

This fully molded 1/2” Door Bumper is quality reproduction of the original factory part. This rubber bumper attaches to the vehicle body to support / cushion the door closure. Usually requires two (2) bumpers each per vehicle.

$6.19/ea.
In Stock