Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

120 items found matching 1958 Cadillac Sixty Special 4 door Hardtop
Body Weatherstrip Kit

p/n: 90-3060-90

This kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.

$878.79/set
Kit
Front Door weatherstrip

p/n: 70-0805-72

Door edge weatherstrip with molded ends. This part is the primary door to body weatherstrip. Includes clips and pins for easy installation.

$273.69/set
In Stock
Front Door Vent Window Kit

p/n: 90-0422-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$247.19/set
Kit
Bumper guard cap

p/n: 70-0883-30

Caps, front bumper guard. Rubber with molded in plate and bolt. A high quality reproduction. Four and seven eighths inch (4-7/8") outside diameter.

$245.79/pr.
In Stock
Rear Window Gasket

p/n: 70-0760-81

This rear window gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit.

$240.99/ea.
In Stock
Rear door weatherstrip

p/n: 70-0571-72

Door edge weatherstrip with molded ends, rear doors. This part is the primary door to body weatherstrip. Includes clips and pins for easy installation.

$220.29/set
In Stock
Front Motor Mount Revulcanizing Service

p/n: 70-0548-11

This Front Motor Mount revulcanizing service replaces the rubber in your original Motor Mounts to make them like new again. The process is designed for the original factory mounts only. Send in cores and allow three weeks for service.

$213.20/pr.
Call to order
Rear door vent weatherstrip

p/n: 38-0088-74

Weatherstrip, rear door vent window. Order our #70-0783-74 division post weatherstrip separately.

$212.79/pr.
In Stock
Front Door Vent Window Weatherstrips

p/n: 38-0087-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$210.39/pr.
In Stock
Hardtop roof rail weatherstrip

p/n: 70-0534-68

Hardtop roof rail weatherstrip. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.

$196.69/pr.
In Stock
Windshield Gasket

p/n: 70-0762-50

This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.

$196.69/ea.
In Stock
Cadillac Master Parts List 1948 - 1959 (Reprint)

p/n: 07-1442-07

This 1948-1959 Cadillac Master Parts List - Two (2) Volume set licensed Detroit Iron reprint provides the most comprehensive repair information in paper format. This OEM PARTS manual reproduction provides detailed original part numbers, part assembly diagrams / illustrations and part textual details for all vehicle subsystems. This information set is a high-quality reproduction of the exact parts manual originally published for use by Cadillac dealer mechanics.

$135.14/set
Ships In 3-4 Days
Motor mount service

p/n: 70-0674-11

Cushion, motor support, rear on transmission to cross member. Revulcanization service only.

$130.19/ea.
Call or Email
Cadillac Master Parts List 1957 - 1964 (Reprint)

p/n: 07-1443-07

This 1957-1964 Cadillac Master Parts List - Two (2) Volume set licensed Detroit Iron reprint provides the most comprehensive repair information in paper format. This OEM PARTS manual reproduction provides detailed original part numbers, part assembly diagrams / illustrations and part textual details for all vehicle subsystems. This information set is a high-quality reproduction of the exact parts manual originally published for use by Cadillac dealer mechanics.

$129.94/set
Ships In 3-4 Days
Splash apron

p/n: 70-2493-45

Filler, splash apron. Die cut masticated rubber to authentic original dimensions. Includes all factory style holes required for installation.

$95.49/set
In Stock
Rigid Run Channel

p/n: 70-0536-58

Rigid, bright beaded edge, mohair lined channel, die trimmed and formed at top. Available in 29" pairs.

$88.99/pr.
In Stock
Upper suspension arm dust seal

p/n: 70-0890-32

Seal, upper A-arm, inner and outer. Four (4) piece set.Height: 1.0 inches.

$88.79/set
In Stock
Rear door hinge pillar weatherstrip

p/n: 70-1655-70

Weatherstrip, rear door hinge pillar.Length: 2.75 inches.

$75.99/pr.
In Stock
Prop shaft retainer bushing

p/n: 70-1889-27

Bushing set for prop shaft retainer.

$74.49/set
In Stock
Stabilizer bushing

p/n: 70-0627-33

Bushings, stabilizer bar, front. Fully molded rubber. One and three fourths inch (1 3/4") length by one and one half inch (1 1/2") width by three fourths inch (3/4") inside hole diameter by one and five eighths inch (1 5/8") height.

$72.99/pr.
In Stock
Steering column floorplate

p/n: 70-1425-88

Seal, steering column to firewall. For 1956 vehicles purchase our #70-1509-88 grommet separately. For 1957-58 vehicles purchase our #70-2316-88 grommet separately.

$71.69/ea.
In Stock
Fenderskirt Edge Seal

p/n: 70-0154-45

Seal, fenderskirt edge, exact copy, trim notch for skirt lock at installation. Compare sketch with your original to be sure. Two (2), five (5) foot strips.

$70.69/pr.
In Stock
Run channel upper bumper

p/n: 70-1629-62

Bumper, upper division post.Length: 1.5 inches. Width: .5625 inches.

$69.99/pr.
In Stock
Hood To Cowl Weatherstrip

p/n: 70-0827-42

Weatherstrip, hood to cowl. An exact reproduction of the original profile. This seal mounts at the rear of the engine bay directly to the body.

$68.69/ea.
In Stock
Radiator support weatherstrip

p/n: 70-2780-45

Seal, radiator support kit. Die cut masticated rubber to authentic original dimensions. Includes all factory style holes required for installation.

$67.89/set
In Stock
Steering column grommet

p/n: 70-2316-88

Grommet, steering column at floor. Order our #70-2316-88 seal separately.

$67.79/ea.
In Stock
Axle rebound pad

p/n: 70-2225-32

Bumper, rear spring axle impact. Located on frame rail. Rubber only, does not include metal retaining clips or bolts.Width: 1.9375 inches. Height: 2.

$66.29/pr.
In Stock
Door weatherstrip

p/n: 70-0552-73

Weatherstrip, front door, auxiliary on body above beltline, hinge pillar windshield post. Two (2) strips, each thirteen and three eighths (13-3/8) inches long with retaining clips.

$62.69/pr.
In Stock
Door weatherstrip

p/n: 70-0551-73

Weatherstrip, front door auxiliary, on door at beltline, right and left. Uses snap-in fasteners, four (4) each included.

$62.49/set
In Stock
Front coil spring pad

p/n: 70-2302-35

Pad, front coil spring insulator cushion. Fully molded, mounts at top of front coil springs.

$59.29/pr.
In Stock
Fenderskirt edge seal

p/n: 70-0992-44

Sealing strip, fenderskirt edge to body. Two (2) strips seventy two (72) inches long.Length: 72.0 inches. Width: .75 inches. Height: .4375 inches.

$58.79/pr.
In Stock
1935-1974 Cadillac Factory Parts Manual, CD

p/n: 07-1346-07

This GM Licensed Detroit Iron CD provides the most comprehensive set of digital Cadillac Factory parts manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.

$58.29/ea.
1957-1958 Cadillac Factory Shop Manual, CD

p/n: 07-1057-07

This GM Licensed Detroit Iron CD provides the most comprehensive set of digital Cadillac Factory shop repair manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.

$58.29/ea.
Front Stabilizer Bar End Link Kit

p/n: 70-2109-33

Kit, front stabilizer bar link assembly replacement. Twenty-two (22) piece set. One (1) set for both sides of one (1) car. Hex head bolt. 5/16"-24nf x 7- 5/8" lg. Comes with metal sleeve, metal cup washers and rubber grommets.

$57.79/pr.
In Stock
Body Anti-Squeak Rubber

p/n: 60-0054-73

Bulb type seal, gravel shield-to-rear bumper, anti-squeak. Also used as a door weatherstrip for some makes and models. Twelve (12) foot strip.

$57.49/ea.
In Stock
Vent division bar weatherstrip

p/n: 70-0783-74

Division bar seal. Made with metal core and attaching tabs like original. Rear door on models with rear door vent.

$56.49/pr.
Made to Order Takes 2-3 Days
Rear Bumper Filler

p/n: 70-3079-30

Filler, rear bumper to body. Die cut masticated rubber.

$55.19/ea.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

$54.29/pr.
In Stock
Beltline Weatherstrip

p/n: 70-0651-58

Rigid, rubber covered weatherstrip with flock lining and one fourth (1/4) inch chrome edge. Available in a 6ft piece.

$53.79/ea.
In Stock
Battery cable grommet

p/n: 70-2318-20

Grommet, battery cable through radiator shroud. Reproduction of original rectangular design exactly. Replaces #1469080. Length: 2.4375 inches. Width: 1.5 inches.

$52.79/ea.
In Stock
Side window leading edge

p/n: 70-0904-80

Side window vertical leading edge weatherstrip.

$52.79/pr.
In Stock
Rear bumper end filler set

p/n: 70-3769-30

Seal, rear bumper end. Die cut masticated rubber to authentic original dimensions.

$51.49/set
In Stock
Headlight seal

p/n: 70-1465-14

Seal, headlight outer rim to sealed beam retainer ring. Possible fit for models with dual headlights.Width: .375 inches. Height: .9375 inches.

$50.19/set
In Stock
Vent division bar weatherstrip

p/n: 70-0703-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$49.89/pr.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0773-WT

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.

$49.59/ea.
In Stock
Hood Bumper

p/n: 70-0501-42

Bumpers, hood. Four (4) per set.Length: 1.4375 inches. Width: .5625 inches.

$47.89/set
In Stock
Rear coil spring pad

p/n: 70-0945-32

Insulator, rear coil spring.

$45.39/pr.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$42.29/ea.
In Stock
Seals, rear wheelhouse

p/n: 70-2782-45

Seals, rear wheelhouse

$40.79/pr.
In Stock
Fan shroud assembly seal

p/n: 70-2779-45

Seal, fan shroud assembly. Die cut masticated rubber to authentic original dimensions. Includes all factory style holes required for installation.

$39.69/pr.
In Stock