Bumper Guard Cap
p/n: 70-0630-30
Bumper "bullets" (caps on bumper guard). Rubber with molded in plate and bolt. High quality reproduction. Four and three eighths inch (4-3/8") outside diameter.
Bumper Guard Cap
p/n: 70-0883-30
Caps, front bumper guard. Rubber with molded in plate and bolt. A high quality reproduction. Four and seven eighths inch (4-7/8") outside diameter.
Front Bumper To Fender End Fillers
p/n: 70-2667-45
This Front Bumper To Fender End Filler pair is designed from the original part for superior fitment and finish. Filler pieces fit between the front of the front fender and back of the front bumper.
Bumper Guard Cap
p/n: 60-0345-30
This Bumper Guard Cap pair, often referred to as bumper bullets, is a reproduction designed from the original for an exact part. Fully molded EPDM dense rubber with molded in bolt for durability.
Front Bumper Grommet
p/n: 17-0013-28
Grommet, front bumper. Fully molded rubber. Excellent quality and craftsmanship.
Front Bumper Grommet
p/n: 40-0057-30
Grommets, front bumper. Fully molded rubber, inside hole slightly rectangular.
Front Bumper Grommet
p/n: 27-0008-28
Grommet, front bumper. Hollow construction, with retaining flange as original, fully detailed copy. Fully molded rubber.
Bumper Grommet
p/n: 40-0047-30
Grommets, front or rear bumpers, right and left. Two (2) pair used per car if needing both front and rear bumper grommets. Fully molded rubber.
Bumper Grommet
p/n: 40-0048-30
Grommets, bumper. Some front and some rear, right and left. Fully molded rubber.
Front Bumper Grommet
p/n: 30-0136-28
Grommets, front bumper support bar to body. Fully molded rubber.
Front Bumper Grommet
p/n: 70-0041-28
Grommets, front bumper. Hollow construction, fully duplicates original.
Front Bumper Grommet
p/n: 27-0001-28
Grommet, front bumper. Hollow construction as original, with retaining flange. Fully molded rubber.
Front Bumper Grommet
p/n: 30-0001-28
Grommet, front bumper. Molded right and left with hollow construction as found on original.Length: 4.0 inches. Width: 2.25 inches.
Front Bumper Grommet
p/n: 30-0171-28
Grommets, front bumper. Molded right and left with correct detail as originally found. Fully molded rubber.
Front Bumper Grommet
p/n: 70-0103-28
Grommets, front bumper. Theses are for the round, tubular bumper support.
Front Bumper Grommet
p/n: 40-0077-30
Grommet, front bumper. Hollow construction for good fit as original.Length: 3.5625 inches.
Front Fender to Bumper Fillers
p/n: 20-2714-28
These Front Fender to Bumper Fillers are designed from originals so it fits correctly.
Front Bumper Grommet
p/n: 30-0077-28
Grommets, front bumper. Molded right and left, including retaining flange. Fully molded rubber.
Front Bumper Grommet
p/n: 70-0291-28
Grommets, front bumper arm. Hollow construction for good fit. Fully molded rubber.
Front Bumper Grommet
p/n: 30-0071-28
Grommets, front bumper. Proper hollow construction as original for good fit. Fully molded rubber.
Front Bumper Grommet
p/n: 40-0122-30
Grommets, front bumper. Hollow construction for good fit. Fully molded rubber.
Front Bumper Grommet
p/n: 27-0004-28
Grommet, front or rear bumper. Hollow construction, perfect fit. Note: In 1935 this grommet is used on the front bumper. In 1937-1938: this bumper is used on the rear bumper.
Front Bumper Grommets
p/n: 60-0257-28
This reproduction Front Bumper Grommet pair is designed from the original part for an authentic fit, finish and appearance. Fully molded with EPDM dense rubber.
Bumper Grommet
p/n: 10-0167-28
Grommets, front and rear bumper arm. Fully molded rubber, slightly angular.
Front Bumper Grommet
p/n: 60-0080-28
Grommets, front bumper, right and left. Hollow construction as original. Fully molded rubber.
Bumper Grommet
p/n: 30-0039-28
Grommets, front or rear bumper. On models without trunk racks. Two (2) pair used per car if needing both front and rear bumper grommets.
Front Bumper Grommet
p/n: 27-0054-28
Grommet, front bumper. Fully molded rubber, detailed and flanged as original.
Front Bumper Grommet
p/n: 60-0321-28
Grommet, front bumper. Fully molded rubber. For vehicles with knee action.
Front Bumper to Body Filler
p/n: 70-2641-30
This two (2) piece Front Bumper to Body Filler is used at the outer corners. The pair is fully molded with excellent detail and construction.
Front Bumper Grommet
p/n: 27-0018-28
Grommet, front bumper. Fully detailed and flanged as original. Fully molded rubber.
Front Bumper Grommet
p/n: 25-0010-28
Grommet, front bumper, right and left. Hollow back, original copy. Length: 4.0625 inches.
Front Bumper Grommet
p/n: 60-0142-28
Grommets, front bumper, right and left, hollow back. Fully molded rubber.
