Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

96 items found matching 1935 Cadillac 355D 4 door Town Coupe - 5 Passenger
Side mount spare wheel grommet

p/n: 70-0341-37

Grommets, sidemount. These are the very large type, right and left. Used simultaneously with our #70-0388-37. Compare with your original. (See also our #70-0388-37).

$349.99/pr.
Made to Order Takes 1-2 Days
Side Mount Spare Wheel Grommet

p/n: 70-0388-37

Grommets/seals, for sidemounted spares, cover hole in fender. Large, fully flanged for fender metal, compare to our #70-0341-37 and your original. Symmetrical, right and left. Approximately five and three fourths (5-3/4) inches by eight (8) inches outside

$349.99/set
Ships in 3-4 Days
Headlight mounting pad set

p/n: 70-0101-14

Mounting pad set, headlight and headlight bracket. Light pad has metal core and high collar as original to accommodate headlight adjustment.

$232.89/set
Made to Order Takes 5 Days
Side Window Run Channel Kit

p/n: 90-0140-58

This eight piece kit includes the inner and outer windowfelts, upper rigid run channels, and flexible run channels needed to complete two doors. Used for front or rear doors in models with vent windows in the door.

$227.59/set
Kit
Side mount spare wheel grommet

p/n: 70-0119-37

Grommets, spare wheel sidemount arm.

$222.89/pr.
Made to Order Takes 1-2 Days
Quarter vent weatherstrip

p/n: 38-0023-76

Weatherstrip, quarter window vent.

$212.79/pr.
In Stock
Front Door Vent Window Set

p/n: 90-0377-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$192.79/set
Kit
Front Door Vent Window Weatherstrips

p/n: 38-0032-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$186.79/pr.
In Stock
Side Window Run Channel Kit

p/n: 90-0142-58

This six (6) piece kit includes the inner and outer windowfelts and flexible run channels needed to complete two (2) doors. Used for front or rear doors in models without vent windows in the door.

$186.59/set
Kit
Ferrule installing tool

p/n: 70-0662-69

Installing tool, door and trunk handle ferrule. For cars and trucks using door and trunk handle ferrules such as our #70-0111-69.

$149.89/ea.
In Stock
Motor mount service

p/n: 70-0724-11

Pad, motor support, rear. Revulcanization service only. Send in your old plates with studs intact. Rebound cushion, furnished with mount.

$136.59/set
Call or Email
Rear Window Gasket

p/n: 70-0673-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$134.59/ea.
In Stock
Side mount spare grommet kit

p/n: 70-0180-37

Grommet kit, rear spare wheel mount for cars without luggage rack. Three (3) piece set consisting of two (2) large grommets, one (1) small grommet.

$129.79/set
Made to Order Takes 4 Days
Hood center protector

p/n: 70-0342-42

Protector, hood center. Brass core as original threaded to fit original screws.

$129.19/pr.
Made to Order Takes 2-3 Days
Shock and stabilizer seal

p/n: 70-1185-33

Seals, shock absorber and rear stabilizer link. Eight (8) piece set.

$127.99/set
Made to Order Takes 1-2 Days
Air inlet hose

p/n: 70-0405-41

Hose, air inlet, radiator shroud to air silencer. Two and one eighths (2-1/8) inch outside diameter by nine and three eighths (9-3/8) inch long. Beautiful copy of rare original part.

$121.79/ea.
Made to Order Takes 1-2 Days
Luggage rack grommet

p/n: 70-0287-46

Grommets, luggage rack brace rod through body. Styles with luggage rack arms.

$113.29/pr.
Made to Order Takes 1-2 Days
Front Door weatherstrip

p/n: 90-1822-72

Door edge weatherstrip. This part is the primary door to body weatherstrip.

$109.39/set
In Stock
Hood corner pad

p/n: 70-0135-42

Pads, hood corners. right and left. Threaded brass core.

$103.99/pr.
Made to Order Takes 2-3 Days
Brake vacuum cylinder rod boot

p/n: 30-0115-24

Boot, vacuum brake cylinder main rod. Accordion type, two (2) inches diameter by six (6) inches. Top quality workmanship and material.Length: 6.0 inches.

$97.39/ea.
In Stock
Cadillac Motors pedal pad

p/n: 70-0076-22

Cadillac Motors pedal pads. Authentic straight diamond pattern. Especially good copy, fine detail.

$97.29/pr.
In Stock
Hood corner pad

p/n: 70-0179-42

Pads, hood rear corners. Threaded metal core.

$95.99/pr.
Made to Order Takes 2-3 Days
Shock and stabilizer seal

p/n: 70-1184-33

Seals, shock absorber and rear stabilizer link. Eight (8) piece set.Width: 1.1875 inches.

$95.99/set
In Stock
Taillight mounting pad

p/n: 70-0122-15

Pad, taillight mounting. Double bead as original.

$93.29/pr.
Made to Order Takes 1-2 Days
Motor Mount

p/n: 70-0244-48

Motor mount pad. Cloth base as original, low type, two (2) inches outside diameter by seven eighths (7/8) inch thick.

$89.39/pr.
Ships In 3-4 Days
Cadillac V-8 pedal pad

p/n: 70-0148-22

Cadillac V-8 pedal pads, clutch and brake. Another rare one we finally found to copy. Superior copy.

$88.19/pr.
In Stock
Hood vent bumper

p/n: 33-0053-42

Bumper, hood ventilator door, self retaining. Five sixteenths (5/16) inch diameter, forty eight (48) piece set.

$87.69/set
Made to Order Takes 1-2 Days
Ride regulator control grommet

p/n: 70-0639-33

Grommets, ride regulator control rod through fender splash shield. Two (2) per car. Made without rod hole. You cut rod slot as required at installation.

$87.39/pr.
Made to Order Takes 1-2 Days
Brake vacuum cylinder rod boot

p/n: 70-0485-24

Boot, brake vacuum cylinder rod, for piston type vacuum cylinder.

$84.99/ea.
Made to Order Takes 1-2 Days
Carpet heel plate

p/n: 70-0617-88

Heel mat, front carpet insert.Length: 13.5625 inches. Width: 9.75 inches.

$84.99/ea.
In Stock
Gearshift grommet

p/n: 70-0334-26

Shield, gearshift through floorboard, molded in all detail, including bolt holes.Length: 7.5 inches. Width: 5.875 inches.

$84.99/ea.
In Stock
Luggage Rack Grommet

p/n: 70-0403-46

Grommets, luggage rack arms through sheet metal, special tall type.

$84.99/pr.
Made to Order Takes 1-2 Days
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$79.49/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$79.49/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$79.49/ea.
In Stock
Rear Door weatherstrip

p/n: 90-1823-72

Door edge weatherstrip. This part is the primary door to body weatherstrip.

$75.29/set
In Stock
Filler neck extension pad

p/n: 70-0123-41

Mounting pad, filler neck extension. Four and nine sixteenths (4-9/16) inches diameter, double bead.

$70.99/ea.
Made to Order Takes 1-2 Days
1935-1974 Cadillac Factory Parts Manual, CD

p/n: 07-1346-07

This GM Licensed Detroit Iron CD provides the most comprehensive set of digital Cadillac Factory parts manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.

$58.29/ea.
Gearshift knob

p/n: 30-0153-24

Knob, gearshift. Rubber only for flanged top nut on gearshift lever.

$54.99/ea.
Made to Order Takes 1-2 Days
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

$54.29/pr.
In Stock
Coil wire sleeve

p/n: 70-0109-21

Sleeve, coil wire to distributor. Fluted to match upper water hoses rubber only. V-12 & V-16 with coils mounted in radiator, V-8 with coils mounted horizontally on brace rods.

$53.79/ea.
Made to Order Takes 1-2 Days
Flexible Run Channel

p/n: 70-1239-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$52.19/ea.
In Stock
Inner Fender Seal

p/n: 60-0288-45

Inner Fender Seal for anti-rattle, running board apron to body, or fender splash panels. Nine sixteenths (9/16) inch by seven eighths (7/8) inch slotted sponge rubber to accept rivets. Sold in eight (8) foot strips.

$50.79/ea.
In Stock
Flexible Run Channel

p/n: 70-1238-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$47.89/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$46.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$46.99/ea.
In Stock
Steering column floorplate

p/n: 70-0340-88

Seal, steering column to toe board. Three fourths (3/4) inch thick, high grade sponge, die cut holes.Length: 3.875 inches. Width: 3.875 inches.

$46.29/ea.
Made to Order Takes 2-3 Days
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$45.19/ea.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$42.29/ea.
In Stock
Trunk Weatherstrip

p/n: 70-0798-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$30.69/ea.
In Stock