Search Results

99 items found matching 1940 Oldsmobile Series 70 Dynamic - Model G 2 door Touring Sedan - 5 Passenger
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Side window run channel kit

p/n: 90-0141-58

This ten (10) piece kit includes the inner and outer windowfelts, upper and lower rigid run channels, and flexible run channels needed to complete two (2) doors. Used for front or rear doors in models with vent windows in the door.

$272.20/set
$245.00/set
10% discount
Kit
Front Door Vent Window Kit

p/n: 90-0366-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$216.50/set
$205.70/set
5% discount
Kit
Front Door Vent Window Weatherstrips

p/n: 38-0016-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$170.40/pr.
In Stock
Motor mount service

p/n: 25-0065-11

Motor mount, rear. Revulcanization service only.1939-48: All 6 cylinder 1939-48: All 8 cylinder with hydramatic transmission (exc. 1948 Ser.

$169.10/pr.
Call or Email
Windshield Gasket

p/n: 50-0204-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit.

$159.50/ea.
In Stock
Rear Window Gasket

p/n: 60-0278-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$139.20/ea.
In Stock
Front OR Rear Door Weatherstrip

p/n: 90-0128-72

Door weatherstrip. This set is the primary seal for the door to the body. Set contains two (2) seals for either the front or rear doors. Purchase two (2) sets if you need to complete all four (4) doors.

$128.50/set
In Stock
Rear Window Gasket

p/n: 60-0280-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$122.30/ea.
In Stock
Motor mount service

p/n: 25-0077-11

Support, engine front lower. Revulcanization service only.

$105.50/ea.
Call or Email
Trunk Weatherstrip

p/n: 70-0083-85

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$103.20/ea.
In Stock
Motor mount service

p/n: 25-0062-11

Motor mount, upper front at cross member. One (1) per car. Revulcanization service only.Length: 4.75 inches. Width: 2.25 inches.

$95.90/ea.
Call or Email
Rigid run channel

p/n: 70-0536-58

Run channel, front door window, for full length of division bar (approximately twenty nine (29) inches). Rigid, bright beaded edge, mohair lined channel, die trimmed and formed at top.

$85.50/pr.
In Stock
Front bumper grommet

p/n: 25-0022-28

Grommet, front bumper.Length: 5.75 inches.

$79.10/pr.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$76.30/ea.
In Stock
Fenderskirt edge seal

p/n: 70-0055-45

Seal, fenderskirt edge. Each five (5) foot long. Similar to our #20-0111-44, but thicker.Length: 60.0 inches. Width: .25 inches.

$71.90/pr.
In Stock
Fuel neck grommet

p/n: 70-0090-39

Grommet, fuel filler neck. Off center flange style. Fully molded rubber. Three and three fourths inch (3 3/4") outside width by three and seven eighths inch (3 7/8") outside length by two and three sixteenths inch (2 3/16") inside hole diameter by one an

$61.70/ea.
In Stock
Front Stablizer Bar End Link Kit

p/n: 70-0567-34

Kit, stabilizer bar link assembly. Twenty two (22) piece set for both sides of one (1) car, front and rear. (Order 2 sets if you need both). Hex head bolt. 5/16"-24nf x 7-5/8" lg. Comes with metal sleeve, cup washers and rubber grommets.

$59.50/set
In Stock
Front Spring Rubber Bumper

p/n: 70-0329-32

Front Spring Rubber Bumper - for upper control arm on frame.

$58.20/pr.
In Stock
Fuel neck grommet

p/n: 70-0091-39

Grommet, fuel filler neck. Saddle style. Three and three eighths inch (3 3/8") outside width by three and five eighths inch (3 5/8") outside length by two and one fourth inch (2 1/4") inside hole diameter by one and one fourth inch (1 1/4") height.

$54.80/ea.
In Stock
Rear coil spring pad

p/n: 50-0359-35

Insulators, rear coil spring. Fabric reinforced rubber as original. One (1) pair per car.

$54.10/pr.
In Stock
Headlight Door To Lens Seal

p/n: 70-0493-14

Headlight Door To Lens Seal - Molded without wire. Double lip type for sealed beam headlights. Note: Compare with our single lip type #70-0389-14 sold separately.

$52.10/pr.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Channel, rigid run, window division bar. Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar.

$52.10/pr.
In Stock
Flexible Run Channel 6 Foot

p/n: 70-1239-58

Window run channel with stainless beaded edge. Six (6) foot length. Cloth covered, mohair lined, flexible channel for sides and top of door windows. Exact replacement for listed vehicles but can be used in many applications.

$48.20/ea.
In Stock
Beltline weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Seven sixteenths (7/16) inch wide, with chrome bead, mohair faced, flexible. Two (2) three (3) foot strips. Bend to fit.

$47.70/pr.
In Stock
Gearshift boot

p/n: 70-2126-24

Boot, transmission gear hand shift lever. Molded in pliable black rubber which may be painted if needed for restoration.

$46.50/ea.
In Stock
Headlight Door To Lens Seal

p/n: 70-0389-14

Headlight door to lens seal. Molded without wire. Single lip type for sealed beams.

$46.40/pr.
In Stock
Vent division bar weatherstrip

p/n: 70-0800-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$46.10/pr.
In Stock
Windshield Division Bar Gasket

p/n: 70-0372-51

Gasket, windshield center post, "H" section, properly sized, requires fitting to top and bottom, not drilled.

$45.30/ea.
In Stock
Front stabilizer bushing

p/n: 50-0094-34

Bushings, front stabilizer shaft-to-frame or stabilizer shaft, front or rear. Fully molded rubber. One and one half inch (1 1/2") length by one and one half inch (1 1/2") width by eleven sixteenths inch (11/16") inside hole diameter by one and one half in

$44.70/pr.
In Stock
Flexible Run Channel 5 Foot

p/n: 70-1238-58

Window run channel, stainless beaded edge. Cloth covered, mohair lined flexible metal channel for sides and top of door windows. Perfect dimensions, Five eighths (5/8) inch wide by nine sixteenths (9/16) inch overall height, exact replacement. Five (5) fo

$44.30/ea.
In Stock
Sliding Quarter Window Weatherstrip

p/n: 70-0353-78

Weatherstrip, inner and outer for sliding quarter window, chrome beaded, mohair faced, flexible stock. May be formed to required outline. Six (6) foot strip.

$43.50/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$43.40/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$43.40/ea.
In Stock
Front suspension bumper

p/n: 50-0092-32

Bumper, front suspension, lower arm. Steel core, with threaded stud, as original. Two (2) per car required.

$42.70/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$41.80/ea.
In Stock
Headlight Mounting Pad

p/n: 70-0201-14

Headlight body mounting gasket. Rubber.

$41.10/pr.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$39.10/ea.
In Stock
Cowl vent weatherstrip

p/n: 70-0143-54

Gasket, cowl vent. Perfect copy of original, not a sponge substitute, top quality material.

$38.30/ea.
In Stock
Rigid run channel

p/n: 70-0516-58

Channel, rigid run, lower side window below beltline, zinc plated steel with black cloth lining, one half (1/2) inch deep by one half (1/2) inch wide, fifteen (15) inches long.

$36.10/pr.
In Stock
Antenna mount pad

p/n: 70-2698-21

Pad, vacuum antenna mount, on fender.Width: 2.0625 inches. Height: 1.5 inches.

$30.90/ea.
In Stock
Wiring grommet

p/n: 70-0561-17

Grommets, license light wire. Two (2) per car.

$29.40/pr.
In Stock
Starter pedal pad

p/n: 25-0049-89

Pad, starter pedal. Original pattern, brown rubber, exact copy.Height: .50 inches.

$26.10/ea.
In Stock
Windshield division bar gasket

p/n: 70-0098-52

Gasket, divided windshield center post. Combines inner and outer gasket in one piece as original. Seventeen (17) inch to (20) inch lengths.Length: 20.

$24.60/ea.
In Stock
Door check link rod end stop

p/n: 70-0479-70

End nut, check link (rubber bar with steel bar insert). Three fourths (3/4) inch by three fourths (3/4) inch by two (2) inch threaded five sixteenths (5/16) inch. (For round stop nut, see our #70-0326-70).

$24.50/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Firewall grommet

p/n: 70-1876-20

Grommet, main wiring harness.

$18.50/ea.
In Stock
Door Handle Ferrule

p/n: 60-0389-69

Ferrule, outside door handle. Chrome with rubber sleeve. Two (2) piece set includes one (1) chrome piece and one (1) rubber piece. Enough for one door.

$17.80/set
In Stock
Wiper transmission gasket

p/n: 70-1198-53

Gasket, windshield wiper transmission (1939-later type). Replaces #4097038.

$13.20/pr.
In Stock
Door check link rod end stop

p/n: 70-0326-70

End stop and pad, door check link rod. Rubber with embedded steel plate, five sixteenths (5/16) inch diameter thread. Most models with rod type door checks.

$13.00/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.00/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Coil wire sleeve

p/n: 70-1179-21

Sleeve, coil wire to distributor. Fluted to match upper water hoses rubber only.

$9.80/ea.
In Stock
Door lock mounting pad

p/n: 27-0020-69

Mounting pad, door lock cylinder, right and left.Length: 1.6875 inches.

$9.10/pr.
In Stock
Door bumper

p/n: 34-0025-42

Bumper, front and rear body hinge pillar, one (1) inch diameter by one fourth (1/4) inch thick, held by screw, steel core. Auxiliary, used only where needed to prevent door rattle.Note: also used on 1942-50 Packards with Clipper styling near t

$7.90/ea.
In Stock
Tie rod dust cover

p/n: 70-0537-32

Dust cover, tie rod ends.

$7.80/ea.
In Stock
Door check link rod end stop

p/n: 70-0384-70

Rubber washer, door check link stop.

$7.70/ea.
In Stock
Door bumper

p/n: 34-0131-37

Bumper, front door above the upper hinge on the upper radius of the door. Stiff-backed, retained by screw, mounted on door only.

$7.40/ea.
In Stock
Side window roller

p/n: 70-0117-62

Anti-rattle roller, side windows. Rubber only, replaces original perfectly and easily. Fits both styles of brackets.

$7.30/ea.
In Stock
Spark plug grommet

p/n: 70-1181-21

Grommet, spark plug and coil wire at distributor cap outlets. For seven (7mm) millimeter, later years.

$7.20/ea.
In Stock
Brown door lock knob

p/n: 70-0660-70

Knob or push button for inside door lock, fits over 1/8" steel rod to door lock. Hard brown rubber, may be lacquered other colors as required.

$7.00/ea.
In Stock
Trunk Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0412-85

Trunk weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$6.90/ft.
In Stock
Spark plug grommet

p/n: 70-1180-21

Grommet, spark plug & coil wire at distributor cap outlets. For nine (9mm) millimeter wire, earlier years.

$6.80/ea.
In Stock
Steering knuckle support seal

p/n: 50-0199-35

Seal, steering knuckle support, upper pivot pin. Four (4) required per car.Height: .5 inches.

$6.50/ea.
In Stock
Brown door lock knob

p/n: 70-0354-70

Knob for inside door lock control rod. Neutral brown color rubber, 3/32 inch hole. See also our #70-0660-70.

$6.30/ea.
In Stock
Shock and stabilizer grommet

p/n: 70-0274-33

Grommet, shock and stabilizer link. Eight (8) required per car. Fully molded rubber with locating collar. One and one sixteenth inch (1 1/16") outside diameter by nine sixteenths inch (9/16") locating collar outside diameter by three eighths inch (3/8") i

$6.30/ea.
In Stock
Door check link rod end stop

p/n: 70-0325-70

Pad, door check link. For rod type door check. One (1) inch diameter by three eighths (3/8) inch thick with five sixteenths (5/16) inch hole.

$6.10/ea.
In Stock
Peel-N-Stick Door Edge Weatherstrip

p/n: 70-0390-WT

Door edge weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Makes for an easier installation of door weatherstripping. Also excellent for use in many different applications and on many different vehicle models.

$6.10/ft.
In Stock
Brake cable anti-rub cover

p/n: 70-1701-24

Anti-rub cover, brake cable. Fits all models with seven sixteenths (7/16) inch outside diameter cable.Width: 2.0 inches.

$5.90/ea.
In Stock
Pressure ring

p/n: 70-0261-69

Pressure ring (washer), sponge rubber, interior door handle and window regulator escutcheon. One and three fourths (1-3/4) inches outside diameter by three eighths (3/8) inch thick.

$5.90/ea.
In Stock
Channel filler weatherstrip

p/n: 70-0075-57

Channel pad, window carrier, incorporating weatherstrip. Used for some side window lower channel.Width: .375 inches. Height: .6875 inches.

$5.80/ft.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0390-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.80/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
In Stock
Body hole plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$5.70/ea.
In Stock
Peel-N-Stick Door Weatherstrip

p/n: 70-0331-WT

Door edge weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Makes for an easier installation of door weatherstripping. Also excellent for use in many different applications and on many different vehicle models.

$5.60/ft.
In Stock
Windshield Weatherstrip

p/n: 70-1190-52

Channel, windshield, for windows without chrome reveal molding. (With 2 piece windshield, select gasket for division bar).

$5.50/ft.
In Stock
Channel filler weatherstrip

p/n: 70-0489-58

Weatherstrip, channel filler, door window sash channel and some quarter window sash channel. Special type with wide weatherstrip edge to be trimmed at assembly, when necessary.

$5.49/ft.
In Stock
Channel filler weatherstrip

p/n: 70-0241-57

Weatherstrip, side window, double-lip seal type, used as filler for one fourth (1/4) inch glass in metal carrier channel.Width: .375 inches. Height: .

$5.40/ft.
In Stock
Window weatherstrip

p/n: 70-1192-52

Gasket, window, for models with chrome reveal molding.

$5.40/ft.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0331-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.30/ft.
In Stock
Peel-N-Stick Door Weatherstrip

p/n: 70-0145-WT

Door edge weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Excellent for use in many different applications and on many different vehicle models.

$5.30/ft.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0145-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.00/ft.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Trunk floor pan plug

p/n: 35-0402-87

Plug, trunk floor pan construction holes, also rest pad for spare wheel area.

$4.20/ea.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Side window weatherstrip

p/n: 70-0079-58

Weatherstrip, side window lower edge, retained in metal flap on side of carrier channel, seals out water when window is cranked up.Width: .375 inches.

$3.40/ft.
In Stock
Hood bumper

p/n: 70-0294-42

Bumper, hood rest, cap type for adjustable screw, fifteenth sixteenths (15/16) inch, seven sixteenths (7/16) inch thick.

$3.00/ea.
In Stock
Hood bumper

p/n: 33-0031-42

Bumper, hood, self-retaining, along edge of hood against fender. One half (1/2) inch outside diameter, for five sixteenths (5/16) inch hole in sheet metal.

$2.80/ea.
In Stock
Shock Absorber Arm Bushing

p/n: 60-0216-33

Bushing, for double acting shock absorber arm link. Height: .78125 inches.

$2.60/ea.
In Stock
Trunk or hood bumper

p/n: 34-0203-42

Bumper, trunk or hood. Molded with clearance for screw. Used for: Buick 1942-50 Bumper for trunk. Chevrolet 1949-55 Bumper for rear hood corners on cowl. Chevrolet 1949-50 Bumper for trunk. Oldsmobile 1938 Bumper under hood corner on radi

$2.60/ea.
In Stock
Window channel retaining clip

p/n: 70-0515-62

Clip, side window run channel retaining. Rust resistant spring steel.Width: .4375 inches. Height: .8125 inches.

$2.60/ea.
In Stock
Window channel retaining clip

p/n: 70-0514-62

Clip, side window run channel retaining. Rust resistant spring steel. Compare with your original.Width: .4375 inches. Height: .9375 inches.

$2.60/ea.
In Stock
Standard bumper

p/n: 33-0136-42

Bumper, standard. See detail page for specific usage.

$2.50/ea.
In Stock
Chrome molding washer

p/n: 60-0727-45

Washer, for attaching chrome moldings on body. Fits into metal cup retainer. Three fourths (3/4) inch diameter, use as required.

$2.10/ea.
In Stock
Glovebox and Fuel Filler Door Bumper

p/n: 33-0127-41

Glovebox and Fuel Filler Door Bumper

$1.30/ea.
In Stock
Standard Bumper

p/n: 33-0128-88

Standard Bumper - Commonly used for fuel filler or glovebox doors.

$1.00/ea.
In Stock