Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

123 items found matching 1949 Chevrolet Styleline Special 2 door Sedan - 6 Passenger
Window Felt and Run Channel Set

p/n: 90-0141-58

This ten (10) piece Window Felt and Run Channel set includes the inner and outer window felts, upper and lower rigid run channels, and flexible run channels needed to complete two (2) doors.

$368.00/set
$330.99/set
10% discount
Kit
Front Door Weatherstrip Set

p/n: 90-0111-72

This eight (8) piece Front Door Weatherstrip set is the primary weatherstripping for the doors to the vehicle body. The set includes the door bottom weatherstrip with molded corners, the hinge pillar bellows, the front edge seals, and the door edge weatherstrip.

$281.99/set
In Stock
Front Door Vent Window Set

p/n: 90-0401-90

This front door vent window weatherstrip set is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$250.50/set
$237.89/set
5% discount
Kit
Windshield Gasket

p/n: 60-0286-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit.

$190.99/ea.
In Stock
Front Door Vent Window Weatherstrips

p/n: 38-0059-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$186.59/pr.
In Stock
Trunk Weatherstrip

p/n: 70-0870-84

This Trunk Weatherstrip is designed from original parts for superior fitment and seal. The set contains the strips and corners that mount to the body and the strip that mounts to the lid.

$175.39/set
In Stock
Engine Mount Service – Revulcanization Only

p/n: 60-0241-11

This Revulcanization Service Only is designed to restore your Front Engine Support Mount to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.

$171.19/pr.
Call or Email
Door weatherstrip

p/n: 60-0250-73

Weatherstrip, door bottom and corners, molded right and left. Overall length forty and three fourths (40-3/4) inch per door.

$163.89/pr.
Made to Order Takes 5-7 Days
Rear Window Gasket

p/n: 60-0302-81

This Rear Window Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$151.99/ea.
In Stock
Spring seat service

p/n: 60-0619-35

Seat, rear spring. Revulcanization service only. Send in complete casting with metal sleeve bushing.

$148.69/ea.
Call or Email
Rear spring bumper service

p/n: 60-0425-32

Bumpers, rear springs to frame. Revulcanization service only.Length: 3.0 inches. Width: 2.5 inches.

$145.89/pr.
Call or Email
Engine Mount Service – Revulcanization Only

p/n: 60-0225-11

This Revulcanization Service Only is designed to restore your Side Engine Support Mount to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.

$139.29/pr.
Call or Email
Door weatherstrip

p/n: 60-0476-73

Weatherstrip, auxiliary, front door opening. Right and left, at beltline on body hinge post, above upper hinge. Metal core, as original, with screw holes.

$129.79/pr.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$98.79/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$98.79/ea.
In Stock
Fender Welting with 3/16 Bead - 50 Ft. Roll

p/n: 70-1100-44

A superior quality Fender Welting material constructed of reinforced black vinyl over a vinyl core. Typically used for attaching four (4) fenders to body. Sold in a 50 foot roll.

$98.79/ea.
In Stock
Door weatherstrip

p/n: 60-0517-73

Weatherstrip, front door hinge pillar at beltline. Fourteen and one half (14-1/2) inches long, molded right and left.Length: 13.75 inches.

$97.69/pr.
In Stock
Weatherstrip body hinge pillar

p/n: 60-0320-73

Weatherstrip body hinge pillar

$97.19/pr.
In Stock
Trunk Weatherstrip Corners

p/n: 60-0511-85

These trunk weatherstrip corners are designed from the original part for superior fitment and seal. The seals mount to the front corners of the trunk directly to the body.

$90.99/pr.
In Stock
Taillight mounting pad

p/n: 60-0176-15

Pad, taillight body mounting. Three (3) inch by six and one half (6-1/2) inch overall. Proper lip design.Length: 6.50 inches. Width: 3.0 inches.

$89.79/pr.
Made to Order Takes 5-7 Days
Steering column floorplate

p/n: 60-0395-36

Cover (grommet), steering gear-to-toe board seal.Width: 5.8125 inches. Height: 6.0 inches.

$83.59/ea.
In Stock
Fender Skirt Edge Weatherstrips

p/n: 20-0111-44

This Fender Skirt Edge Weatherstrip pair is designed from the original part for superior fitment, finish and sealing function. Two five (5) foot strips that fit between the rear wheel fender skirt and rear quarter panel.

$80.69/pr.
In Stock
Exhaust system support pad

p/n: 60-0319-13

Insulator (support), exhaust system, right angle type, fabric reinforced. Steel core at one end as original.Width: 2.5 inches. Height: 1.625 inches.

$78.19/ea.
Made to Order Takes 5-7 Days
Brake and Clutch Pedal Pads

p/n: 60-0068-22

Brake and Clutch Pedal Pads - The proper design and fully detailed with ribs extending down over sides of the pad. Length: 3.50 inches. Width: 2.0 inches.

$75.29/pr.
In Stock
Front Spring Rubber Bumper

p/n: 70-0329-32

Front Spring Rubber Bumper Pair - for upper control arm on frame.

$75.29/pr.
In Stock
Brake Master Cylinder Filler Access Hole Cover

p/n: 60-0016-24

This Master Cylinder Access Hole Cover is designed from the original part for superior fitment and seal. Secures the Brake Master Cylinder Filler and Inspection Access Hole in the vehicle.

$72.89/ea.
In Stock
Hood to Cowl Weatherstrip

p/n: 60-0428-42

This Hood to Cowl Weatherstrip is designed from original parts so it fits correctly. The pair comes ready to install with pre-punched holes.

$69.99/pr.
In Stock
License light mounting pad

p/n: 60-0174-17

Pad. rear license light mounting. Two and three fourths (2-3/4) inch by three and nine thirty seconds (3-9/32) inch overall. Two (2) required per vehicle.

$68.79/pr.
Made to Order Takes 5-7 Days
Headlight Door To Lens Seal

p/n: 70-0493-14

Headlight Door To Lens Seal - Molded without wire. Double lip type for sealed beam headlights. Note: Compare with our single lip type #70-0389-14 sold separately.

$67.59/pr.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

$67.59/pr.
In Stock
Flexible Run Channel

p/n: 70-1239-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$64.89/ea.
In Stock
Beltline Weatherstrip

p/n: 70-0555-58

This Beltline Weatherstrip is sold as a three (3) foot pair. The beltline is used for side window inner and/or outer, front and/or rear doors. Available in a 3ft pair.

$63.99/pr.
In Stock
Vent division bar weatherstrip

p/n: 60-0494-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$63.89/pr.
Made to Order Takes 5-7 Days
Bumper support bar pad

p/n: 60-0420-30

Pads, rear bumper bar, inner, to quarter panel. Fully molded rubber. Two and eleven sixteenths inch (2-11/16") outside length by one inch (1") outside width by one and five eighths inch (1-5/8") inside hole length by one fourth inch (1/4") inside hole wid

$62.99/pr.
Made to Order Takes 5-7 Days
Inner Fender Seal

p/n: 60-0288-45

Inner Fender Seal for anti-rattle, running board apron to body, or fender splash panels. Nine sixteenths (9/16) inch by seven eighths (7/8) inch slotted sponge rubber to accept rivets. Sold in eight (8) foot strips.

$62.99/ea.
In Stock
Rear spring bushing

p/n: 60-0311-35

Bushing, rear spring front eye, inlox cartridge type as original.

$61.79/ea.
In Stock
Flexible Run Channel

p/n: 70-1238-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$61.29/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$60.29/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$60.29/ea.
In Stock
Sliding Quarter Window Weatherstrip

p/n: 70-0353-78

This Sliding Quarter Window Weatherstrip is used for side window inner and/or outer, front and/or rear doors. Available in a 6ft lengths.

$60.29/ea.
In Stock
Spring seat seal

p/n: 60-0261-32

Seal, rear spring seat. Four (4) piece set.Height: .1875 inches.

$59.89/set
In Stock
Fenderskirt Edge Seal

p/n: 60-0109-45

Fenderskirt Edge Seal - One (1) ten (10) foot strip. Length: 120.0 inches.

$59.69/ea.
In Stock
Front suspension bumper

p/n: 50-0092-32

Bumper, front suspension, lower arm. Steel core, with threaded stud, as original. Two (2) per car required.

$58.99/ea.
In Stock
Fender Welting with 3/16 Bead - 25 Ft. Roll

p/n: 70-1099-44

A superior quality Fender Welting material constructed of reinforced black vinyl over a vinyl core. Typically used for attaching two (2) fenders to body. Sold in a 25 foot roll.

$57.79/ea.
In Stock
Front Stabilizer Bushing

p/n: 60-0088-34

Front Stabilizer Bushing - Front stabilizer bar mounting. Fully molded rubber. Two (2) required per car. One and five sixteenths inch (1 5/16") length by one and five sixteenths inch (1 5/16") width by five eighths inch (5/8") inside hole diameter by one and three fourths inch (1 3/4") height.

$57.59/pr.
In Stock
Headlight Mounting Pad

p/n: 70-0201-14

Headlight body mounting gasket. Rubber.

$56.99/pr.
In Stock
Rear Bumper Gravel Shield

p/n: 60-0173-30

This Rear Bumper Gravel Shield, also known as a rear bumper face bar-to-body seal, is made of high quality dense rubber. Fully molded rubber with all original features.

$56.69/ea.
In Stock
Side Window Sash Channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$54.39/ea.
In Stock
Rigid Run Channel

p/n: 70-0516-58

Channel, rigid run, lower side window below beltline, zinc plated steel with black cloth lining. Available in 15" pairs.

$49.89/pr.
In Stock
Accelerator Pedal

p/n: 60-0240-40

Accelerator pedal. Steel core with hinge. Length: 8.9375 inches.

$48.59/ea.
In Stock