Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

81 items found matching 1951 Oldsmobile Super 88 2 door Sedan - 5 Passenger
Rear Window Gasket

p/n: 50-0293-81

This rear window gasket mounts around the full perimeter of the back glass and has the divider bars molded directly into it for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.

$351.99/ea.
In Stock
Side Window Run Channel Kit

p/n: 90-0141-58

This ten (10) piece kit includes the inner and outer windowfelts, upper and lower rigid run channels, and flexible run channels needed to complete two (2) doors.

$308.50/set
$277.29/set
10% discount
Kit
Front Door Vent Window Set

p/n: 90-0405-90

This front door vent window weatherstrip set is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$192.90/set
$183.19/set
5% discount
Kit
Front Door Vent Window Weatherstrips

p/n: 38-0062-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$175.49/pr.
In Stock
Motor mount service

p/n: 25-0072-11

Insulator, cushion assembly. Engine mount at bell housing, right and left. Revulcanization service only.Length: 5.25 inches.

$174.39/pr.
Call or Email
Windshield Gasket

p/n: 50-0514-50

This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding.

$153.59/ea.
In Stock
Trunk Weatherstrip

p/n: 70-0870-84

This trunk weatherstrip set is designed from original parts for superior fitment and seal. The set contains the strips and corners that mount to the body and the strip that mounts to the lid.

$149.99/set
In Stock
Taillight mounting pad

p/n: 25-0053-15

Mounting Pad set, tail light to body and crown molding to rear fender, right and left. Sold as four (4) piece set only.

$134.19/set
Made to Order Takes 1-2 Days
Trunk Weatherstrip

p/n: 70-0871-84

This trunk weatherstrip set is designed from original parts for superior fitment and seal. The set contains the strips and corners that mount to the body and the strip that mounts to the lid.

$126.19/set
In Stock
Engine Mount Revulcanization Service Only

p/n: 25-0077-11

This Revulcanization Service Only is to restore your Front Lower Engine Support to it's like new original condition. Service requires your metal core. Please call or email for more service details and ordering.

$112.19/ea.
Call or Email
Engine (Motor) Mount Revulcanization Service Only

p/n: 25-0062-11

This Revulcanization Service Only is to restore your supplied Front Upper Engine Mount at Crossmember to it's like new original condition. Service requires your metal core. Please call or email for more service details and ordering.

$103.89/ea.
Call or Email
Trunk Weatherstrip Corners

p/n: 60-0511-85

These trunk weatherstrip corners are designed from the original part for superior fitment and seal. The seals mount to the front corners of the trunk directly to the body.

$76.29/pr.
In Stock
Fenderskirt edge seal

p/n: 25-0102-44

Seal, fenderskirt. Two 5 foot lengths of extrusion.Length: 60.0 inches. Width: .625 inches.

$72.89/pr.
In Stock
Sliding quarter window seal

p/n: 70-2162-78

Weatherstrip, sliding quarter window. Vertically mounted in body where leading edge of sliding quarter window fits when closed.Length: 13.75 inches.

$70.79/pr.
In Stock
Hood To Cowl Weatherstrip

p/n: 70-0940-42

This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This seal mounts at the rear of the engine bay to seal between the hood and vehicle body cowl.

$67.69/set
In Stock
Stabilizer Bar End Link Set

p/n: 70-0567-34

Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt. 5/16"-24NF x 7-5/8" long. Includes metal sleeves, cup washers and rubber grommets.

$64.59/set
In Stock
Front Spring Rubber Bumper

p/n: 70-0329-32

Front Spring Rubber Bumper - for upper control arm on frame.

$62.99/pr.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

$56.59/pr.
In Stock
Flexible Run Channel

p/n: 70-1239-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$54.39/ea.
In Stock
Beltline Weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Bend to fit. Available in a 3ft pair.

$53.79/pr.
In Stock
Gearshift boot

p/n: 70-2126-24

Boot, transmission gear hand shift lever. Molded in pliable black rubber which may be painted if needed for restoration.

$52.39/ea.
In Stock
Headlight Door To Lens Seal

p/n: 70-0389-14

Headlight door to lens seal. Molded without wire. Single lip type for sealed beams.

$52.29/pr.
In Stock
Front stabilizer bushing

p/n: 50-0094-34

Bushings, front stabilizer shaft-to-frame or stabilizer shaft, front or rear. Fully molded rubber. One and one half inch (1 1/2") length by one and one half inch (1 1/2") width by eleven sixteenths inch (11/16") inside hole diameter by one and one half in

$51.89/pr.
In Stock
Flexible Run Channel

p/n: 70-1238-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$51.29/ea.
In Stock
Fenderskirt Edge Seal

p/n: 60-0109-45

Fenderskirt Edge Seal - One (1) ten (10) foot strip. Length: 120.0 inches.

$49.99/ea.
In Stock
Front suspension bumper

p/n: 50-0092-32

Bumper, front suspension, lower arm. Steel core, with threaded stud, as original. Two (2) per car required.

$49.49/ea.
In Stock
Headlight Mounting Pad

p/n: 70-0201-14

Headlight body mounting gasket. Rubber.

$47.69/pr.
In Stock
Gravel shield anti-squeak

p/n: 60-0173-30

Seal, rear bumper face bar-to-body (gravel shield). Fully molded rubber with all original features. Seventy-nine inches (79") long. Extrusion ends measure one and three fourths inch (1-3/4") wide by nine sixteenths inch (9/16") height.

$47.39/ea.
In Stock
Side Window Sash Channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$45.39/ea.
In Stock
Rigid Run Channel

p/n: 70-0516-58

Channel, rigid run, lower side window below beltline, zinc plated steel with black cloth lining. Available in 15" pairs.

$41.79/pr.
In Stock
Body mounting pad

p/n: 27-0092-48

Insulator, body mounting pad. Metal core & locating collar covered with rubber. Two inch (2") square by fifteen sixteenths inch (15/16") locating collar outside diameter by five eighths inch (5/8") locating collar inside hole diameter. Seven sixteenths in

$25.29/ea.
In Stock
Hydraulic pump mounting pad

p/n: 70-0852-67

Pad, mounting, hydraulic pump. Used on models with hydraulic window lifts or hydraulic convertible top. Two (2) to three (3) required. per car.

$21.99/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$21.89/ea.
In Stock
Window Stop Stem Bumper

p/n: 33-0675-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$17.59/pr.
In Stock
Solenoid plunger boot

p/n: 60-0567-21

Boot, solenoid plunger, starter switch at starter.Height: 1.625 inches.

$17.39/ea.
In Stock
Vent Window Division Bar Weatherstrip

p/n: 70-0040-56

Vent window division post seal. Extruded thirty (30") inch rubber strip that may have to be glued to your old original division post seal core, or directly to the division post.

$17.39/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$12.89/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$12.69/sqf
In Stock
Wiring grommet

p/n: 70-0355-14

Grommet, electric wire into light body under fenders, for headlights, taillights, some parking lights and auxiliary (fog) lights. Fits seven eighths (7/8) inch hole in light body. Two (2) to eight (8) per car as required.

$12.39/ea.
In Stock
Wiper transmission gasket

p/n: 50-0484-53

Gasket, windshield wiper transmission to cowl. Steel rule die cut replacement for #4587667.

$11.49/pr.
Made to Order Takes 2-3 Days
Hood bumper

p/n: 50-0158-42

Bumper, hood in fender flange.Width: 1.0 inches. Height: 1.5 inches.

$11.29/ea.
In Stock
Window Stop Stem Bumper

p/n: 33-0622-62

Bumper, window stop. One and one fourth (1-1/4) inch square by one half (1/2) inch thick. Compare with our #33-0540-62 and #33-0675-62.

$11.19/ea.
In Stock
Door bumper

p/n: 50-0203-41

Bumper, fuel filler door, rear fender. With steel core, screw retained two (2) per car.Width: .5 inches. Height: .625 inches.

$9.39/pr.
In Stock
Window Stop Stem Bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$9.29/ea.
In Stock
Tie rod dust cover

p/n: 70-0537-32

Dust cover, tie rod ends.

$9.19/ea.
In Stock
Body Bolt Cushion

p/n: 60-0189-48

Pad, for each body bolt under frame bracket, to cushion washer and nut. Fully molded rubber. One and seven eighths inch (1 7/8") outside diameter by seven eighths inch (7/8") inside hole diameter by nine sixteenths inch (9/16) height.

$8.99/ea.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0492-73

Door edge weatherstrip made from high-quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$8.59/ft.
In Stock
Wiper control grommet

p/n: 60-0197-53

Grommet, wiper control connection link. Replaces #4161287. 11/32" I.D. X 19/32" O.D.

$8.59/ea.
In Stock
Brown door lock knob

p/n: 70-0660-70

Knob or push button for inside door lock, fits over 1/8" steel rod to door lock. Hard brown rubber, may be lacquered other colors as required.

$8.29/ea.
In Stock
Trunk Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0463-85

Trunk weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$8.19/ft.
In Stock