Search Results

91 items found matching 1954 Chevrolet Bel Air 4 door Wagon - 3 Seat
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Side window run channel kit

p/n: 90-0141-58

This ten (10) piece kit includes the inner and outer windowfelts, upper and lower rigid run channels, and flexible run channels needed to complete two (2) doors. Used for front or rear doors in models with vent windows in the door.

$272.20/set
$245.00/set
10% discount
Kit
Front Door Vent Window Kit

p/n: 90-0407-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$196.30/set
$186.50/set
5% discount
Kit
Transmission mount service

p/n: 60-0468-25

Support retainer, transmission mounting at front cross member. One (1) required per car. Revulcanization service only.

$151.80/ea.
Call or Email
Front Door Vent Window Weatherstrips

p/n: 38-0067-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$150.20/pr.
In Stock
Front or Rear Door seals

p/n: 60-0595-72

Door edge weatherstrip, front or rear door. This part is the primary door to body weatherstrip. Two strips fourteen (14') feet each. Glue in type. Used on the front doors for Buick, Oldsmobile & Pontiac models. Also used on both front and rear doors for C

$146.80/pr.
In Stock
Windshield Gasket

p/n: 25-0047-50

This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding.

$144.70/ea.
Made to Order Takes 2-3 Days
Spring seat service

p/n: 60-0619-35

Seat, rear spring. Revulcanization service only. Send in complete casting with metal sleeve bushing.

$119.50/ea.
Call or Email
Rear spring bumper service

p/n: 60-0425-32

Bumpers, rear springs to frame. Revulcanization service only.Length: 3.0 inches. Width: 2.5 inches.

$117.50/pr.
Call or Email
Rear Window Gasket

p/n: 60-0469-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$84.60/ea.
In Stock
Front Stabilizer Kit

p/n: 60-0221-33

Link kit, full replacement, front stabilizer bar link. Twenty two (22) piece set. Hex head bolt 5/16"-24NF x 6-3/8" long. Comes with metal sleeve, metal cup washers and rubber grommets.

$69.60/set
In Stock
Steering column floorplate

p/n: 60-0395-36

Cover (grommet), steering gear-to-toe board seal.Width: 5.8125 inches. Height: 6.0 inches.

$64.50/ea.
In Stock
Exhaust system support pad

p/n: 60-0319-13

Insulator (support), exhaust system, right angle type, fabric reinforced. Steel core at one end as original.Width: 2.5 inches. Height: 1.625 inches.

$60.40/ea.
Made to Order Takes 2-3 Days
Front Spring Rubber Bumper

p/n: 70-0329-32

Front Spring Rubber Bumper - for upper control arm on frame.

$58.20/pr.
In Stock
License light mounting pad

p/n: 60-0174-17

Pad. rear license light mounting. Two and three fourths (2-3/4) inch by three and nine thirty seconds (3-9/32) inch overall. Two (2) required per vehicle.

$53.10/pr.
In Stock
Fuel neck grommet

p/n: 60-0512-41

Grommet, fuel filler neck. Fully molded rubber, slighlty angled and oblong. Three and one fourth inch (3 1/4") outside width by three and one half inch (3 1/2") outside length by two and three sixteenths inch (2 3/16") top hole diameter. Two and one four

$52.70/ea.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Channel, rigid run, window division bar. Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar.

$52.10/pr.
In Stock
Flexible Run Channel 6 Foot

p/n: 70-1239-58

Window run channel with stainless beaded edge. Six (6) foot length. Cloth covered, mohair lined, flexible channel for sides and top of door windows. Exact replacement for listed vehicles but can be used in many applications.

$48.20/ea.
In Stock
Beltline weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Seven sixteenths (7/16) inch wide, with chrome bead, mohair faced, flexible. Two (2) three (3) foot strips. Bend to fit.

$47.70/pr.
In Stock
Inner Fender Seal

p/n: 60-0288-45

Inner Fender Seal for anti-rattle, runningboard apron to body, or fender splash panels. Nine sixteenths (9/16) inch by seven eighths (7/8) inch slotted sponge rubber to accept rivets. Sold in eight (8) foot strips.

$46.90/ea.
In Stock
Vent division bar weatherstrip

p/n: 60-0494-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$46.10/pr.
In Stock
Rear spring bushing

p/n: 60-0311-35

Bushing, rear spring front eye, inlox cartridge type as original.

$44.60/ea.
In Stock
Flexible Run Channel 5 Foot

p/n: 70-1238-58

Window run channel, stainless beaded edge. Cloth covered, mohair lined flexible metal channel for sides and top of door windows. Perfect dimensions, Five eighths (5/8) inch wide by nine sixteenths (9/16) inch overall height, exact replacement. Five (5) fo

$44.30/ea.
In Stock
Sliding Quarter Window Weatherstrip

p/n: 70-0353-78

Weatherstrip, inner and outer for sliding quarter window, chrome beaded, mohair faced, flexible stock. May be formed to required outline. Six (6) foot strip.

$43.50/ea.
In Stock
Spring seat seal

p/n: 60-0261-32

Seal, rear spring seat. Four (4) piece set.Height: .1875 inches.

$43.20/set
In Stock
Fenderskirt Edge Seal

p/n: 60-0109-45

Fenderskirt Edge Seal - One (1) ten (10) foot strip. Length: 120.0 inches.

$43.10/ea.
In Stock
Front suspension bumper

p/n: 50-0092-32

Bumper, front suspension, lower arm. Steel core, with threaded stud, as original. Two (2) per car required.

$42.70/ea.
In Stock
Front Stabilizer Bushing

p/n: 60-0088-34

Front Stabilizer Bushing - Front stabilizer bar mounting. Fully molded rubber. Two (2) required per car. One and five sixteenths inch (1 5/16") length by one and five sixteenths inch (1 5/16") width by five eighths inch (5/8") inside hole diameter by one and three fourths inch (1 3/4") height.

$41.60/pr.
In Stock
Headlight Mounting Pad

p/n: 70-0201-14

Headlight body mounting gasket. Rubber.

$41.10/pr.
In Stock
Hood to cowl weatherstrip

p/n: 70-1698-43

Weatherstrip, hood to cowl.Length: 47.0 inches. Width: .5625 inches. Height: .28125 inches.

$41.00/ea.
In Stock
Gravel shield anti-squeak

p/n: 60-0173-30

Seal, rear bumper face bar-to-body (gravel shield). Fully molded rubber with all original features. Seventy-nine inches (79") long. Extrusion ends measure one and three fourths inch (1-3/4") wide by nine sixteenths inch (9/16") height.

$40.80/ea.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$39.10/ea.
In Stock
Rigid run channel

p/n: 70-0516-58

Channel, rigid run, lower side window below beltline, zinc plated steel with black cloth lining, one half (1/2) inch deep by one half (1/2) inch wide, fifteen (15) inches long.

$36.10/pr.
In Stock
Accelerator Pedal

p/n: 60-0240-40

Accelerator pedal. Steel core with hinge. Length: 8.9375 inches.

$35.00/ea.
In Stock
Gravel shield bumper

p/n: 60-0146-30

Bumper, rear bumper deflector. Two (2) per car.Chevrolet 1942-55 Bumper, rubber, radiator grille, lower panel.Length: 2.1875 inches.

$33.00/pr.
In Stock
Parking light lens gasket

p/n: 60-0672-17

Gasket, parking light lens. Die cut from one eighth (1/8) inch sponge rubber.

$30.70/pr.
In Stock
Exhaust system hanger

p/n: 60-0307-13

Support (insulator) muffler-to-tailpipe, webbing reinforced. One (1) per car.Length: 3.4 inches. Width: 1.0 inches.

$28.90/ea.
In Stock
Firewall grommet

p/n: 60-0565-20

Grommet, two hole type.Chevrolet 1949-54 Grommet, two hole type. Replaces #3708180.

$28.60/ea.
In Stock
Brake master cylinder boot

p/n: 60-0180-24

Boot, brake master cylinder rod. Fits on one and one fourth (1-1/4) inch diameter cylinder. Height: 2.125 inches.

$27.60/ea.
In Stock
Steering Column Connecting Rod Seal

p/n: 60-0400-36

Steering column steering connecting rod seal. Power steering models require one (1) per car. Non-power steering models require two (2) per car.

$27.40/ea.
In Stock
Brake And Clutch Pedal Bumper

p/n: 60-0104-24

Bumper, brake and clutch pedal shank, rides under floorboard. One and one eighth (1-1/8) inch clearance for pedal shaft. Compare with our #60-0579-24.

$26.70/pr.
Made to Order Takes 1-2 Days
Steering column seal

p/n: 60-0518-36

Seal, steering column and shift column toe pan. Five eighths (5/8) inch thick sponge rubber.Width: 4.875 inches. Height: .625 inches.

$24.20/ea.
In Stock
Brake and clutch pedal pad

p/n: 60-0300-22

Pad, brake and clutch pedal.Length: 3.0 inches. Width: 2.5625 inches.

$22.70/ea.
Made to Order Takes 1-2 Days
Firewall grommet

p/n: 60-0276-45

Grommet, firewall, throttle rod and tube, oil pressure gauge pipe, heat indicator tube and choke rod. One and seven sixteenths (1-7/16) inch outside diameter.

$20.80/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Exhaust system hanger

p/n: 60-0308-13

Insulator (support). Muffler/tailpipe system, strap type as original. One and three fourths (1-3/4) inch by three and five eighths (3-5/8) inch.

$13.00/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.00/ea.
In Stock
Gearshift bushing

p/n: 60-0237-24

Bushing, gearshift shaft lever, larger type. Three eighths (3/8) inch inside diameter by nine sixteenths (9/16) inch outside diameter barrel.Height: .

$10.80/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Wiring grommet

p/n: 70-0355-14

Grommet, electric wire into light body under fenders, for headlights, taillights, some parking lights and auxiliary (fog) lights. Fits seven eighths (7/8) inch hole in light body. Two (2) to eight (8) per car as required.

$10.60/ea.
In Stock
Wiper transmission gasket

p/n: 60-0402-53

Gasket, windshield wiper transmission mounting. Replaces #4597009. Two (2) required per car.

$10.50/pr.
In Stock
Window stop stem bumper

p/n: 33-0622-62

Bumper, window stop. One and one fourth (1-1/4) inch square by one half (1/2) inch thick. Compare with our #33-0540-62 and #33-0675-62.Length: 1.

$9.50/ea.
In Stock
Window stop stem bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$7.90/ea.
In Stock
Side window roller

p/n: 70-0117-62

Anti-rattle roller, side windows. Rubber only, replaces original perfectly and easily. Fits both styles of brackets.

$7.30/ea.
In Stock
Taillight Gasket

p/n: 60-0671-15

Gasket, taillight to fender. Two 1/4" strips of sponge rubber cut 26-3/4" long. One (1) pair required per car.

$7.20/pr.
In Stock
Brown door lock knob

p/n: 70-0660-70

Knob or push button for inside door lock, fits over 1/8" steel rod to door lock. Hard brown rubber, may be lacquered other colors as required.

$7.00/ea.
In Stock
Control arm bushing seal

p/n: 60-0095-32

Seal, lower control arm pivot bolt bushing. Four (4) per car.Width: .1875 inches.

$6.40/ea.
In Stock
Rear spring bushing

p/n: 60-0236-48

Bushing, body shackles.Length: 1.125 inches.

$6.40/ea.
In Stock
Door Weatherstrip

p/n: 70-0491-73

Weatherstrip, door edge. Fine grain sponge. Larger type used on most GM cars this period. Width: 13/16". Height: 11/16".

$6.30/ft.
In Stock
Shock and stabilizer grommet

p/n: 70-0274-33

Grommet, shock and stabilizer link. Eight (8) required per car. Fully molded rubber with locating collar. One and one sixteenth inch (1 1/16") outside diameter by nine sixteenths inch (9/16") locating collar outside diameter by three eighths inch (3/8") i

$6.30/ea.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
In Stock
Body hole plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$5.70/ea.
In Stock
Control arm bushing seal

p/n: 60-0094-32

Seal, upper and lower control arm cross shaft bushing, at inner end of arm.1939-48: Lower only, all pass. (exc.

$5.60/ea.
In Stock
Window Gasket Weatherstrip

p/n: 60-0059-83

This window gasket weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be used with 1/4" glass in a 3/8" channel. Most often used for rear quarter windows and rear windows.

$5.40/ft.
In Stock
Door weatherstrip

p/n: 70-0219-73

Weatherstrip, door edge, constant section on some models. Five eighths (5/8) inch by (5/8) inch cross-section, high grade, fine grain sponge rubber.

$5.30/ft.
In Stock
Shock absorber grommet

p/n: 60-0235-33

Grommet, shock absorber mounting, plain cylinder type with flat ends.

$5.30/ea.
In Stock
Firewall grommet

p/n: 35-0515-20

Grommet, floor pan, rear compartment and body.

$4.70/ea.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Firewall retainer

p/n: 60-0586-20

Retainer, firewall insulation panel. "Christmas Tree" style popular during this time. Constructed of vinyl plastic. Up to ten (10) required per car.

$4.60/ea.
In Stock
Door lock bumper

p/n: 34-0484-71

Bumper, door lock post, upper, one half (1/2) inch diameter by one half (1/2) inch tall, plated screw.Height: .50 inches.

$4.30/ea.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Door or tailgate bumper

p/n: 33-1228-71

Bumper pads, door or tailgate. Twin retainer style. Three eighths (3/8) inch by seven eighths (7/8) inch by one half (1/2) inch high.

$4.20/ea.
In Stock
Shock absorber bushing

p/n: 70-0541-33

Bushing, shock absorber mounting. Five eighths (5/8) inch hole, one and one fourth (1-1/4) inch outside diameter, five eighths (5/8) inch thick.

$4.10/ea.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Firewall grommet

p/n: 32-0162-21

Grommet, utility. Sheet Metal Hole: 3/4" Center Hole: 1/4" Outside Diameter: 15/16" Slot Width: 1/16"

$3.90/ea.
In Stock
Firewall grommet

p/n: 32-0263-17

Grommet, license light wire through body. Sheet Metal Hole: 3/4" Center Hole: 5/16" Outside Diameter: 1" Slot Width: 1/16"

$3.90/ea.
In Stock
Door bumper

p/n: 33-1227-71

Bumper, door edge, twin retainer style, three eighths (3/8) inch wide by seven eighths (7/8) inch long by three eighths (3/8) inch high.

$3.50/ea.
In Stock
Shock absorber bushing

p/n: 70-0547-32

Bushing, shock absorber mounting. Double cone style, rear. Five eighths (5/8) inch hole, one and one sixteenths (1-3/16) inch outside diameter, three fourth (3/4) inch thick.

$3.50/ea.
In Stock
Sash channel weatherstrip

p/n: 70-0585-58

Weatherstrip, sash channel, outer, for side windows, one half (1/2) inch wide weatherlip (cross section).Width: .50 inches.

$3.40/ft.
In Stock
Trunk floor pan plug

p/n: 35-0070-87

Plug, trunk and floor pan drain hole. Buick 1950-65 Plug, trunk and floor pan drain hole.

$3.20/ea.
In Stock
Hood bumper

p/n: 70-0294-42

Bumper, hood rest, cap type for adjustable screw, fifteenth sixteenths (15/16) inch, seven sixteenths (7/16) inch thick.

$3.00/ea.
In Stock
Hood & Door bumper

p/n: 33-0459-42

Bumper, hood to cowl and door hinge pillar upper. May be used in both places.

$2.90/ea.
In Stock
Hood bumper

p/n: 33-0427-42

Bumper, hood panel to fender.

$2.60/ea.
In Stock
Standard bumper

p/n: 33-0496-71

Bumper, used at door opening at upper corner, license plate, and/or fuel filler door. Self-retaining type.

$2.60/ea.
In Stock
Trunk or hood bumper

p/n: 34-0203-42

Bumper, trunk or hood. Molded with clearance for screw. Used for: Buick 1942-50 Bumper for trunk. Chevrolet 1949-55 Bumper for rear hood corners on cowl. Chevrolet 1949-50 Bumper for trunk. Oldsmobile 1938 Bumper under hood corner on radi

$2.60/ea.
In Stock
Door weatherstrip fastener

p/n: 50-0198-73

Fastener, door edge weatherstrip, steel. One half (1/2) inch long, thirteen thirty second (13/32) inch diameter head, black finish.

$2.50/ea.
In Stock
Standard bumper

p/n: 33-0136-42

Bumper, standard. See detail page for specific usage.

$2.50/ea.
In Stock
Lock cylinder gasket

p/n: 60-0641-69

Gasket, door or trunk lock cylinder. Exact reproduction

$2.10/ea.
In Stock
Glovebox and Fuel Filler Door Bumper

p/n: 33-0127-41

Glovebox and Fuel Filler Door Bumper

$1.30/ea.
In Stock
Standard Bumper

p/n: 33-0128-88

Standard Bumper - Commonly used for fuel filler or glovebox doors.

$1.00/ea.
In Stock
Standard rubber washer

p/n: 60-0726-45

Washer, for attaching moldings, emblems, and fender guards as required on body.

$0.90/ea.
In Stock