Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

94 items found matching 1956 Chevrolet Bel Air 4 door Wagon - 3 Seat
Glass Weatherstrip Kit

p/n: 90-3028-90

This kit includes the weatherstrip components needed for the glass on your restoration project.

$868.69/set
Kit
Body Mounting Pad Set

p/n: 70-3200-48

This twenty-eight (28) piece Body Mounting Pad set is designed from the original parts for superior fitment and function. Designed from original parts, made from rubber with steel core.

$393.99/set
Kit
Body Weatherstrip Kit

p/n: 90-3017-90

This kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.

$378.69/set
Kit
Side Window Run Channel Kit

p/n: 90-0141-58

This ten (10) piece kit includes the inner and outer windowfelts, upper and lower rigid run channels, and flexible run channels needed to complete two (2) doors.

$277.29/set
Kit
Front Door Vent Window Set

p/n: 90-0402-90

This front door vent window weatherstrip set is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$146.99/set
Kit
Door Weatherstrip

p/n: 60-0247-72

Door edge weatherstrip, with pins. This part is the primary door to body weatherstrip. For Cadillac models, these are for the FRONT doors ONLY. For Chevrolet and Pontiac models, these are for the REAR doors ONLY.

$136.69/pr.
In Stock
Front Door Weatherstrip

p/n: 60-0299-72

Door weatherstrip, front door snap-on type. High quality sponge rubber with inserted nylon clips. Each strip approximately one hundred sixty six (166) inches long.

$130.29/pr.
In Stock
Windshield Gasket

p/n: 60-0266-50

This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding.

$124.59/ea.
In Stock
Front Door Vent Window Weatherstrips

p/n: 38-0060-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$101.29/pr.
In Stock
Engine Mounts - Rear

p/n: 60-0234-11

Engine Mounts - Rear, right and left. Steel core as original.

$78.99/pr.
In Stock
Rear wheelhouse seal

p/n: 60-0354-45

Seal, rear wheelhouse panel-to-quarter panel, outer. Two (2) five (5) foot strips, one for each side.Length: 60.0 inches. Width: .21875 inches.

$77.99/pr.
Made to Order Takes 5-7 Days
Front Stabilizer Kit

p/n: 60-0221-33

Link kit, full replacement, front stabilizer bar link. Twenty two (22) piece set. Hex head bolt 5/16"-24NF x 6-3/8" long. Comes with metal sleeve, metal cup washers and rubber grommets.

$75.49/set
In Stock
Rear Window Gasket

p/n: 70-2051-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$69.99/ea.
In Stock
Door Auxiliary Weatherstrip

p/n: 60-0342-73

Weatherstrip, front door, auxiliary on door front at beltline, right and left. Held on by button fasteners (our #50-0198-73, four (4) each included in set). Also known as a "J" seal.

$65.49/set
In Stock
Brake and Clutch Pedal Pads

p/n: 60-0068-22

Brake and Clutch Pedal Pads - The proper design and fully detailed with ribs extending down over sides of the pad. Length: 3.50 inches. Width: 2.0 inches.

$62.99/pr.
In Stock
Tailgate or Back Door Weatherstrip

p/n: 70-3604-84

This tailgate or back door weatherstrip is designed from the original part for superior fitment and seal. The seal mounts with properly spaced plastic clips around the full perimeter of the rear opening.

$60.79/ea.
In Stock
Gravel shield anti-squeak

p/n: 60-0359-30

Seal, rear bumper-to-body. Fully molded rubber. Approximately sixty-six (66) inches long. Extrusion ends measure two and one fourths inch (2-1/4") wide by three eighths inch (3/8") height.

$60.39/ea.
Made to Order Takes 5-7 Days
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

$56.59/pr.
In Stock
Front Suspension Rubber Bumper

p/n: 60-0219-32

Front Suspension Rubber Bumper for the front suspension lower control arm (attaches to lower arm spring mount). This part is compatible to several Chevrolet model vehicles. Self-retaining, top quality. Height: 1.75 inches.

$54.99/pr.
In Stock
Flexible Run Channel

p/n: 70-1239-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$54.39/ea.
In Stock
Accelerator Pedal Pad

p/n: 60-0239-40

Accelerator Pedal Pad - Slip-over type made from top quality rubber. Length: 8.875 inches.

$53.89/ea.
Made to Order Takes 5-7 Days
Beltline Weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Bend to fit. Available in a 3ft pair.

$53.79/pr.
In Stock
Vent division bar weatherstrip

p/n: 60-0529-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$53.49/pr.
In Stock
Inner Fender Seal

p/n: 60-0288-45

Inner Fender Seal for anti-rattle, running board apron to body, or fender splash panels. Nine sixteenths (9/16) inch by seven eighths (7/8) inch slotted sponge rubber to accept rivets. Sold in eight (8) foot strips.

$52.89/ea.
In Stock
Flexible Run Channel

p/n: 70-1238-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$51.29/ea.
In Stock
Sliding Quarter Window Weatherstrip

p/n: 70-0353-78

Weatherstrip, door window inner and outer, front and rear doors. Bend to fit. Available in a 6ft lengths.

$50.39/ea.
In Stock
Front Stabilizer Bushing

p/n: 60-0088-34

Front Stabilizer Bushing - Front stabilizer bar mounting. Fully molded rubber. Two (2) required per car. One and five sixteenths inch (1 5/16") length by one and five sixteenths inch (1 5/16") width by five eighths inch (5/8") inside hole diameter by one and three fourths inch (1 3/4") height.

$48.19/pr.
In Stock
Headlight Mounting Pad

p/n: 70-0201-14

Headlight body mounting gasket. Rubber.

$47.69/pr.
In Stock
Fenderskirt edge seal

p/n: 60-0201-45

Steele Rubber Products has the best quality Fenderskirt edge seal for your Street Rod or Custom Build project. Made from top-quality rubber to ensure durability and proper seal.

$46.39/pr.
In Stock
Side Window Sash Channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$45.39/ea.
In Stock
Steering column floorplate

p/n: 60-0403-24

Cover, steering gear and clutch pedal push rod dash seal.Length: 8.625 inches. Width: 7.625 inches.

$44.49/set
Made to Order Takes 5-7 Days
Rigid Run Channel

p/n: 70-0516-58

Channel, rigid run, lower side window below beltline, zinc plated steel with black cloth lining. Available in 15" pairs.

$41.79/pr.
In Stock
Taillight gasket

p/n: 60-0691-15

Seal, taillight bezel. Correct profile and long lasting material. Two (2) strips cut thirty six (36) inches long.Length: 36.0 inches. Width: .21875 inches.

$34.99/pr.
Made to Order Takes 5-7 Days
Exhaust system hanger

p/n: 60-0307-13

Support (insulator) muffler-to-tailpipe, webbing reinforced. One (1) per car.Length: 3.4 inches. Width: 1.0 inches.

$33.59/ea.
In Stock
Brake master cylinder boot

p/n: 60-0180-24

Boot, brake master cylinder rod. Fits on one and one fourth (1-1/4) inch diameter cylinder. Height: 2.125 inches.

$31.99/ea.
Made to Order Takes 5-7 Days
Front Suspension Bumper - Lower Control Arm

p/n: 60-0220-32

Bumper, front suspension, lower arm. Steel core as original, excellent quality.

$28.99/pr.
In Stock
Body mounting pad

p/n: 60-0188-48

Pad and steel bushing assembly. Two (2) required per vehicle Rectangular rubber with metal core, locating collar and metal bolt. Two and seven sixteenths inch (2 7/16") length by one and three fourths inch (1 3/4") width by three fourths inch (3/4") ins

$28.89/ea.
In Stock
Hood to cowl weatherstrip

p/n: 60-0153-42

Weatherstrip, hood to cowl. Exact copy with clips.

$27.89/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$21.89/ea.
In Stock
Body mounting pad

p/n: 60-0119-48

Pad, body mounting. Rubber original type with metal core, locating collar and metal bolt liner. Two and one eighths inch (2 1/8") outside diameter by three fourths inch (3/4") inside bolt hole diameter by seven eighths inch (7/8") metal bolt outside diame

$21.39/ea.
In Stock
Cowl Drain Gutter Hose Grommet

p/n: 33-0329-54

Grommet, cowl gutter drain hose. Nine sixteenth (9/16) inch hole through cowl side wall, five sixteenths (5/16) inch inside diameter. Two (2) per car.

$17.89/pr.
In Stock
Solenoid plunger boot

p/n: 60-0567-21

Boot, solenoid plunger, starter switch at starter.Height: 1.625 inches.

$17.39/ea.
In Stock
Window Regulator / Accelerator Rod Seal

p/n: 60-0652-70

This part is used as a front window regulator or accelerator rod through toe board seal. A front window regulator seal for 1955-60 passenger cars with electric windows and for 1957-62 Corvette models. Used as an accelerator rod through toeboard seal for 1955-62 V8 only Corvettes.

$16.59/ea.
Made to Order Takes 5-7 Days
Exhaust system hanger

p/n: 60-0308-13

Insulator (support). Muffler/tailpipe system, strap type as original. One and three fourths (1-3/4) inch by three and five eighths (3-5/8) inch.

$14.99/ea.
In Stock
Hood bumper

p/n: 60-0318-42

Bumper, hood side-to-fender, stem retainer type. Two (2) or more per car, as required.

$13.79/ea.
In Stock
Splash Apron - A-Arm Dust Shield Set

p/n: 70-4041-45

This two (2) piece Splash Apron - A-Arm Dust Shield set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions.

$12.99/pr.
In Stock
Dimmer Switch Grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$12.89/ea.
In Stock
Gearshift bushing

p/n: 60-0237-24

Bushing, gearshift shaft lever, larger type. Three eighths (3/8) inch inside diameter by nine sixteenths (9/16) inch outside diameter barrel.Height: .

$12.69/ea.
In Stock
Masticated Rubber Sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$12.69/sqf
In Stock
Door Handle Gasket Set

p/n: 60-0352-69

This Door Handle Gasket Set is designed from the original part for superior fitment and seal. This six (6) piece gasket set will do two (2) doors.

$12.39/set
In Stock